STANLEY HSW1142LTM Right angle type white led Datasheet

HSW11□2LTM Series
Right Angle Type White LED
Features
Package
Product features
Right Angle Type,
1142LTM : Diffused pale yellow resin,
1152LTM : Diffused pale orange resin
・Outer Dimension 2.8 x 0.95 x 0.8mm ( L x W x H )
・Temperature range
Storage Temperature : -40℃~100℃
Operating Temperature : -30℃~85℃
・Lead–free soldering compatible
・RoHS compliant
Chromaticity coordinates
x = 0.299YP., y = 0.296TYP.
(Condition : IF=20mA)
Spatial distribution
115 deg.
Die materials
InGaN
Rank grouping parameter
Sorted by luminous intensity and chromaticity per rank taping
Assembly method
Auto pick & place machine (Auto Mounter)
Soldering methods
Recommendation of Reflow soldering / Flow Soldering (Dip Soldering) is impossible.
Taping and reel
3,000pcs per reel in a 8mm width tape. (Standard)
Reel diameter:φ180mm
ESD
1kV (HBM)
Recommended Applications
Cellular Phone, Mobile Equipment, Electric Household Appliances, Other General Applications
2008.12.22
Page 1
HSW11□2LTM Series
Right Angle Type White LED
Color and Luminous Intensity
Part No.
Material
Emitted
Color
Lens
Color
(Ta=25℃)
Luminous Intensity
InGaN
White
HSW1152LTM※ 1
InGaN
White
φ v (lm)
Iv (mcd)
MIN.
HSW1142LTM
Luminous Flux
Pale
1,720
Yellow
Pale
1,200
Orange
TYP.
IF
TYP.
IF
2,000
20
5.0
20
1,440
20
3.6
20
※1 High Color reproduction Type
※Note : The above luminous intensity(Iv) is the setup values of the sorting machine.
(Tolerance : IV…±10%)
2008.12.22
Page 2
HSW11□2LTM Series
Right Angle Type White LED
Absolute Maximum Ratings
Item
Symbol
Power Dissipation
Forward Current
Pulse Forward
Current ※ 1
Derating
(Ta=25℃ or higher)
Reverse Voltage
Operating
Temperature
Storage
Temperature
(Ta=25℃)
Absolute Maximum Ratings
Unit
1142LTM
1152LTM
Pd
114
114
mW
IF
30
30
mA
IFRM
100
100
mA
⊿ IF
0.4
0.4
mA/ ℃
⊿ IFRM
1.33
1.33
mA/ ℃
VR
5
5
V
Topr
-30~ +85
℃
Tstg
-40~ +100
℃
※1 IFRM Measurement condition : Pulse Width≦1ms, Duty≦1/20
2008.12.22
Page 3
HSW11□2LTM Series
Right Angle Type White LED
Electro-Optical Characteristics
Item
Forward
Condition
(Ta=25℃)
Characteristics
Symbol
1142LTM 1152LTM
TYP.
3.2
3.2
MAX.
3.5
3.5
Unit
Voltage ※ 1
IF =20mA
V
Reverse Current
VR =5V
IR
MAX.
50
50
μA
Half Intensity
Angle
IF =20mA
2θ 1/2
TYP.
115
115
deg.
Chromaticity
Coordinates
x
TYP.
0.299
0.299
-
IF =20mA
y
TYP.
0.296
0.296
-
VF
※1 Forward Voltage Tolerance Range : ±0.1V
2008.12.22
Page 4
HSW11□2LTM Series
Right Angle Type White LED
Luminous Intensity Rank (1142LTM)
(Ta=25℃)
Intensity Tolerance each Rank : +/-10%
Rank
VC
VD
WA
WB
I V (mcd)
Condition
MIN.
MAX.
1,720
1,860
1,860
2,000
IF=20mA
2,000
2,200
2,200
2,400
※Please contact our sales staff concerning rank designation.
Luminous Intensity Rank (1152LTM)
(Ta=25℃)
Intensity Tolerance each Rank : +/-10%
Rank
UC
UD
VA
VB
VC
I V (mcd)
Condition
MIN.
MAX.
1,200
1,300
1,300
1,440
1,440
1,580 IF=20mA
1,580
1,720
1,720
1,860
※Please contact our sales staff concerning rank designation.
2008.12.22
Page 5
HSW11□2LTM Series
Right Angle Type White LED
Sorting Chart for Chromaticity Coordinates
(Ta=25℃)
Chromaticity Coordinates Tolerance Each Rank : +/-0.01
LEFT DOWN point
LEFT UP point
RIGHT UP point
RIGHT UP point
Rank
x
y
x
y
x
y
x
y
1p
0.272
0.258
0.264
0.267
0.276
0.281
0.282
0.272
1q
0.280
0.248
0.272
0.258
0.282
0.272
0.288
0.262
1r
0.282
0.272
0.276
0.281
0.287
0.295
0.292
0.286
1s
0.288
0.262
0.282
0.272
0.292
0.286
0.296
0.276
2p
0.292
0.286
0.287
0.295
0.297
0.305
0.300
0.295
2q
0.296
0.276
0.292
0.286
0.300
0.295
0.304
0.285
2r
0.300
0.295
0.297
0.305
0.307
0.315
0.309
0.305
2s
0.304
0.285
0.300
0.295
0.309
0.305
0.311
0.294
※ Please contact our sales staff concerning rank designation.
2008.12.22
Page 6
HSW11□2LTM Series
Right Angle Type White LED
Technical Data (1142LTM)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition : Ta = 25℃, IF = 20mA
Relative Intensity
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Forward Voltage VF(V)
2008.12.22
Condition : Ta = 25℃
Relative Intensity
Forward Current IF(mA)
Condition : Ta = 25℃
Forward Current IF(mA)
Page 7
HSW11□2LTM Series
Right Angle Type White LED
Technical Data (1142LTM)
Derating
Ambient Temperature vs. Relative Intensity
Condition : IF = 20mA
Relative Intensity
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature vs. Maximum Forward Current
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Ambient Temperature vs. Forward Voltage
Forward Current vs. Chromaticity
Ambient Temperature : Ta(℃)
2008.12.22
Condition : Ta = 25℃
y
Forward Voltage VF(V)
Condition : IF = 20mA
x
Page 8
HSW11□2LTM Series
Right Angle Type White LED
Technical Data (1142LTM)
Ambient Temperature vs. Chromaticity
y
Condition : IF = 20mA
x
2008.12.22
Page 9
HSW11□2LTM Series
Right Angle Type White LED
Technical Data (1152LTM)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition : Ta = 25℃, IF = 20mA
Relative Intensity
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Forward Voltage VF(V)
2008.12.22
Condition : Ta = 25℃
Relative Intensity
Forward Current IF(mA)
Condition : Ta = 25℃
Forward Current IF(mA)
Page 10
HSW11□2LTM Series
Right Angle Type White LED
Technical Data (1152LTM)
Derating
Ambient Temperature vs. Relative Intensity
Condition : IF = 20mA
Relative Intensity
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature vs. Maximum Forward Current
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Ambient Temperature vs. Forward Voltage
Forward Current vs. Chromaticity
Ambient Temperature : Ta(℃)
2008.12.22
Condition : Ta = 25℃
y
Forward Voltage VF(V)
Condition : IF = 20mA
x
Page 11
HSW11□2LTM Series
Right Angle Type White LED
Technical Data (1152LTM)
Ambient Temperature vs. Chromaticity
y
Condition : IF = 20mA
x
2008.12.22
Page 12
HSW11□2LTM Series
Right Angle Type White LED
Package Dimensions
(Unit: mm)
Weight: (5.3)mg
Recommended Soldering Pattern
Taping Specification
(Unit: mm)
(Unit: mm)
・Quantity: 3,000pcs/ reel (standard)
2008.12.22
Page 13
HSW11□2LTM Series
Right Angle Type White LED
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
2008.12.22
350 ℃
3 s
1 time
(MAX.)
(MAX.)
(MAX.)
Page 14
HSW11□2LTM Series
Right Angle Type White LED
Reliability Testing Result
Reliability Testing Result Applicable Standard
Room Temp.
Operating Life
High Temp.
Operating Life
Low Temp.
Operating Life
Wet High Temp.
Operating Life
Wet High Temp.
Storage Life
High Temp.
Storage Life
Low Temp.
Storage Life
Cycled Temp.
Humidity Life
EIAJ ED4701/ 100(101)
EIAJ ED4701/ 100(101)
EIAJ ED4701/ 100(101)
EIAJ ED4701/ 100(102)
EIAJ ED4701/ 100(103)
EIAJ ED4701/ 100(105)
EIAJ ED4701/ 200(201)
EIAJ ED4701/ 200(202)
EIAJ ED4701/ 200(203)
Resistance to
Reflow Soldering
EIAJ ED4701/ 300(301)
Electric Static Discharge
(ESD)
Vibration,
Variable Frequency
EIAJ ED4701/ 300(304)
EIAJ ED4701/ 400(403)
Thermal Shock
Testing Conditions
Duration
Failure
Ta = 25℃, IF = 30mA
1,000 h
0/ 20
Ta = 85℃ ,IF = 6mA
1,000 h
0/ 20
Ta = -30℃, IF = 20mA
1,000 h
0/ 20
Ta = 60℃, 90%, IF = 16mA
1,000 h
0/ 20
Ta = 60℃, 90%
1,000 h
0/ 20
200 cycles
0/ 20
Ta = 100℃
1,000 h
0/ 20
Ta = -40℃
1,000 h
0/ 20
10 cycles
0/ 20
Twice
0/ 20
once each polarity
0/ 20
2h
0/ 20
Ta = -40℃ ~ 100℃ (each 15min.)
Ta = -10℃ ~ 65℃, 95%, 24h/ cycle
Preheat : 150 ~ 180℃(120s Max.)
Soldering Temp. : 260℃(5s)
Moisture Soak : 30℃, 70%, 72h
C = 100pF, R2 = 1.5KΩ, ±1,000V
2
98.1m/ s (10G), 100 ~ 2KHz, 20min,
XYZ each direction
Failure Criteria
Items
Symbols
Conditions
Failure criteria
Luminous Intensity
Iv
IF=20mA
Testing Min. Value < Spec. Min. Value x 0.7
Forward Voltage
VF
IF=20mA
Testing Max. Value ≧ Spec. Max. Value x 1.2
Reverse Current
IR
VR=5V
Testing Max. Value ≧ Spec. Max. Value x 2.5
Cosmetic Appearance
-
-
Occurrence of notable decoloration,
deformation and cracking
2008.12.22
Page 15
HSW11□2LTM Series
Right Angle Type White LED
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
2008.12.22
Page 16
Similar pages