RCD MCT0805-1R00-M Thick film precision chip resistors military grade Datasheet

THICK FILM PRECISION CHIP RESISTORS
MILITARY GRADE
MCT SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
process
compatible
RESISTORSCAPACITORSCOILSDELAY LINES
t
L
T
t
Choice of termination materials: 100% tin plated
nickel barrier is standard (palladium silver, gold, or
tin-lead solder is available)
Wraparound termination is standard, single sided
termination is available (Option ‘S’)
Wide resistance range: 0.1Ω to 100MΩ
100% Group A screening per MIL-R-55342 available
Wide design flexibility for use with hybrid or smd circuitry
Custom sizes, high surge, untrimmed chips available
Backside metalization available
W
Wraparound Termination (standard)
Single Face Termination (Opt. S)
Precision performance to 0.1% 50ppm/°C!
RCD series MCT chip resistors are designed to meet
applicable performance requirements of MIL-PRF-553421.
Variety of sizes and termination materials allows wide design
flexibility. Palladium silver terminations are recommended for
use with conductive epoxy, gold is recommended for wire
bonding, and tin plated nickel for soldering.
SPECIFICATIONS
RCD
Type
Wattage
@ 70°C**
Voltage
Rating
Resistance
R an g e
L*
±.008 [0.2]
W
±.008 [0.2]
MCT0402
50MW
30V
10Ω - 1M
.039 [1.0]
.020 [.51]
MCT0505
100MW
50V
1Ω - 10M
.050 [1.27]
.050 [1.27]
MCT0603
100MW
40V
0.1Ω - 100M
.060 [1.53]
.030 [.76]
MCT0805
150MW
70V
0.1Ω - 100M
.075 [1.91]
.050 [1.27]
MCT1005
200MW
100V
1Ω - 20M
.100 [2.54]
.050 [1.27]
MCT1206
250MW
125V
0.1Ω - 100M
.124 [3.15]
.061 [1.55]
MCT1505
250MW
125V
1Ω - 10M
.150 [3.81]
.050 [1.27]
MCT1210
500MW
150V
0.1Ω - 100M
.124 [3.15]
.100 [2.54]
MCT2010
800MW
150V
0.1Ω - 100M
.196 [5.0]
.100 [2.54]
MCT2512
1000MW
200V
0.1Ω - 100M
.248 [6.3]
.125 [3.18]
t2
T*
.012±.005
[.3±.13]
.014±.007
[.35±.18]
.012±.006
[.3±.15]
.016±.008
[.4±.2]
.018±.008
[.45±.2]
.020±.008
[.5±.2]
.020±010
[.5±.25]
.020±.010
[.5±.25]
.020±.010
[.5±.25]
.020±.010
[.5±.25]
.014±.006
[.35±.15]
.018±.006
[.45±.15]
.018±.006
[.45±.15]
.018±.006
[.50±.15]
.020±.006
[.50±.15]
.020±.006
[.50±.15]
.020±.006
[.50±.15]
.020±.006
[.50±.15]
.020±.006
[.50±.15]
.020±.006
[.50±.15]
* Dimension given is for single face termination. Add .004” [.1mm] for wraparound termination. ** Wattage based on mounting to ceramic substrate, derate by 25% if mounted to a glass epoxy P.C.B.
1 Military p/n’s are given for reference only and do not imply qualification or exact interchangeability. 2 Dimension “t” (underside termination width) applies only to termination type W
TYPICAL PERFORMANCE CHARACTERISTICS
C haracteri sti c
Temp. C oeffi ci ent
Thermal Shock
PART NUMBER DESIGNATION:
10Ω to 1MΩ range
<10Ω,>1MΩ
±300 ppm ±100ppm ±50ppm ±400ppm
(standard)
(opt.)
(opt.)
(standard)
0.5%
0.5%
0.5%
0.75%
Short Ti me Overload
0.5%
0.25%
0.25%
1%
Hi gh Temp. Exposure
0.5%
0.5%
0.5%
0.75%
Moi sture Resi stance
0.5%
0.5%
0.5%
1.5%
Load Li fe
1.0%
0.5%
0.5%
1.5%
- 1001 - F T 101 W
RCD Type
Options: S = single sided termination
(leave blank for wraparound termination)
Res. Value: 4 digit code if tol. is 0.1% to 1%
(R100=0.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω,
1001=1KΩ, 1002=10K, 1003=100K, 1004=1MΩ)
3 digit code if ≥2% (R10=0.1Ω, 1R0=1Ω, 100= 10Ω,
101=100Ω, 102=1KΩ, 103=10K, 104=100K,105=1MΩ)
Tolerance Code: B=0.1%, C=0.25%, D=0.5%,
F=1%, G=2%, J=5%, K=10%, M=20%
DERATING
% OF RATED POWER
MCT0805
Packaging: B=bulk, T=tape&reel, W=waffle tray
100
Optional TC Characteristic: 50 = 50ppm, 101 =
100ppm, 201= 200ppm, etc. (leave blank if standard)
75
50
25
0
35
70
105
140 150
175
Termination Material: Standard = W (lead-free100% Tin
with Nickel barrier). Optional = Q (Tin-Lead solder with Ni
barrier), P= untinned Palladium Silver, G=Gold
AMBIENT TEMPERATURE (°C)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA045B
17
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
Similar pages