DATA SHEET Part No. AN13300A Package Code No. *SOP022 - P - 0375C SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. Publication date: January 2005 SDF00039AEB 1 AN13300A Contents Features …………………………………………………………………………………………………………… 3 Applications ………………………………………………………………………………………………………… 3 Package ……………………………………………………………………………………………………………. 3 Block Diagram ………………………………………………………………………………………………………. 4 Pin Descriptions …………………………………………………………………………………………………… 4 Absolute Maximum Ratings ………………………………………………………………………………………. 5 Operating Supply Voltage Range ………………………………………………………………………………. 5 SDF00039AEB 2 AN13300A AN13300A Silicon Monolithic Bipolar IC Features y Video signal input - output interface for DSP Applications y VCR ( Digital Video equipment ) Package y Dill - 22Pin plastic package SO Type SDF00039AEB 3 AN13300A Block Diagram Pin Descriptions Pin No. Function Impedance Pin No. Function Impedance 1 EE - Y IN 30k 12 Clamp Pulse IN 210k 2 EE / VV SW 210k 13 Clamp DC 65k 3 VV - Y IN 30k 14 Pre - Y OUT E. F. 4 Pre - Y Adj. 64k 15 N. C. Capacitor 500k 5 VCC1 ( 5V ) 16 Post - Y IN 26k 6 EE - C IN 30k 17 Post - Y Adj. 65k 7 GND 18 Post - C IN 21k 8 VV - C IN 10k 19 GND 9 Pre - C Adj. 62k 20 Post - C OUT E. F. 10 VCC2 ( 3.3 V ) 21 N. C. Control 65k 11 Pre - C OUT E. F. 22 Post - Y OUT E. F. SDF00039AEB 4 AN13300A Absolute Maximum Ratings No. Parameter Symbol Rating Unit Note 1 Storage temperature Tstg –55 to +125 °C * 2 Operating ambient temperature Topr –20 to +70 °C * 3 Operating ambient atmospheric pressure Popr 1.013 × 105 ± 0.61 × 105 Pa 4 Operating constant gravity Gopr 9 810 m/S2 5 Operating shock Sopr 4 900 m/S2 6 Supply voltage VCC 7 8 Note) *: Supply current Power dissipation ICC VCC1 5.5 VCC2 3.6 ICC1 35 ICC2 0.5 PD V mA 195 W Expect for the operating ambient temperature and storage temperature , all ratings are for Ta = 25°C. Operating Supply Voltage Range Operating supply voltage range VCC1 4.75 V to 5.25 V VCC2 3.1 V to 3.5 V SDF00039AEB 5 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP