NSC MM54C02 Quad 2-input nand gate, quad 2-input nor gate, hex inverter, triple 3-input nand gate, dual 4-input nand gate Datasheet

MM54C00/MM74C00 Quad 2-Input NAND Gate
MM54C02/MM74C02 Quad 2-Input NOR Gate
MM54C04/MM74C04 Hex Inverter
MM54C10/MM74C10 Triple 3-Input NAND Gate
MM54C20/MM74C20 Dual 4-Input NAND Gate
General Description
Features
These logic gates employ complementary MOS (CMOS) to
achieve wide power supply operating range, low power consumption, high noise immunity and symmetric controlled
rise and fall times. With features such as this the 54C/74C
logic family is close to ideal for use in digital systems. Function and pin out compatibility with series 54/74 devices minimizes design time for those designers already familiar with
the standard 54/74 logic family.
All inputs are protected from damage due to static discharge by diode clamps to VCC and GND.
Y
Y
Y
Y
Y
Wide supply voltage range
Guaranteed noise margin
High noise immunity
Low power consumption
Low power
TTL compatibility
3V to 15V
1V
0.45 VCC (typ.)
10 nW/package (typ.)
Fan out of 2
driving 74L
Connection Diagrams
Dual-In-Line Packages
MM54C00/MM74C00
MM54C02/MM74C02
TL/F/5877–1
MM54C04/MM74C04
TL/F/5877 – 2
TL/F/5877 – 3
Top View
Top View
Top View
Order Number MM54C00 or
MM74C00
Order Number MM54C02 or
MM74C02
Order Number MM54C04
or MM74C04
MM54C20/MM74C20
MM54C10/MM74C10
TL/F/5877 – 4
TL/F/5877 – 5
Top View
Top View
Order Number MM54C10 or
MM74C10
Order Number MM54C20 or
MM74C20
C1995 National Semiconductor Corporation
TL/F/5877
RRD-B30M115/Printed in U. S. A.
MM54C00/MM74C00, MM54C02/MM74C02, MM54C04/MM74C04,
MM54C10/MM74C10, MM54C20/MM74C20
February 1988
Absolute Maximum Ratings
Operating VCC Range
Maximum VCC Voltage
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Voltage at Any Pin
b 55§ C to a 125§ C
b 40§ C to a 85§ C
Storage Temperature Range
b 65§ C to a 150§ C
18V
Power Dissipation (PD)
Dual-In-Line
Small Outline
Lead Temperature
(Soldering, 10 seconds)
b 0.3V to VCC a 0.3V
Operating Temperature Range
54C
74C
3.0V to 15V
700 mW
500 mW
300§ C
DC Electrical Characteristics
Min/Max limits apply across the guaranteed temperature range unless otherwise noted
Symbol
Parameter
Conditions
Min
Typ
Max
Units
CMOS TO CMOS
VIN(1)
Logical ‘‘1’’ Input Voltage
VIN(0)
Logical ‘‘0’’ Input Voltage
VOUT(1)
Logical ‘‘1’’ Output Voltage
VCC e 5.0V
3.5
VCC e 10V
8.0
V
V
VCC e 5.0V
VCC e 10V
VOUT(0)
Logical ‘‘0’’ Output Voltage
1.5
V
2.0
V
VCC e 5.0V, IO e b10 mA
4.5
V
VCC e 10V, IO e b10 mA
9.0
V
VCC e 5.0V, IO e 10 mA
0.5
VCC e 10V, IO e 10 mA
1.0
V
1.0
mA
IIN(1)
Logical ‘‘1’’ Input Current
VCC e 15V, VIN e 15V
IIN(0)
Logical ‘‘0’’ Input Current
VCC e 15V, VIN e 0V
ICC
Supply Current
VCC e 15V
0.005
b 1.0
b 0.005
0.01
V
mA
15
mA
LOW POWER TO CMOS
VIN(1)
VIN(0)
VOUT(1)
VOUT(0)
Logical ‘‘1’’ Input Voltage
Logical ‘‘0’’ Input Voltage
Logical ‘‘1’’ Output Voltage
Logical ‘‘0’’ Output Voltage
54C, VCC e 4.5V
VCC b 1.5
V
74C, VCC e 4.75V
VCC b 1.5
V
54C, VCC e 4.5V
0.8
V
74C, VCC e 4.75V
0.8
V
54C, VCC e 4.5V, IO e b10 mA
4.4
V
74C, VCC e 4.75V, IO e b10 mA
4.4
V
54C, VCC e 4.5V, IO e 10 mA
0.4
V
74C, VCC e 4.75V, IO e 10 mA
0.4
V
CMOS TO LOW POWER
VIN(1)
Logical ‘‘1’’ Input Voltage
VIN(0)
Logical ‘‘0’’ Input Voltage
VOUT(1)
Logical ‘‘1’’ Output Voltage
54C, VCC e 4.5V
4.0
74C, VCC e 4.75V
4.0
54C, VCC e 4.5V
74C, VCC e 4.75V
VOUT(0)
Logical ‘‘0’’ Output Voltage
V
V
1.0
V
1.0
V
54C, VCC e 4.5V, IO e b360 mA
2.4
V
74C, VCC e 4.75V, IO e b360 mA
2.4
V
54C, VCC e 4.5V, IO e 360 mA
0.4
V
74C, VCC e 4.75V, IO e 360 mA
0.4
V
OUTPUT DRIVE (see 54C/74C Family Characteristics Data Sheet) TA e 25§ C (short circuit current)
ISOURCE
Output Source Current
VCC e 5.0V, VIN(0) e 0V, VOUT e 0V
b 1.75
ISOURCE
Output Source Current
VCC e 10V, VIN(0) e 0V, VOUT e 0V
b 8.0
mA
ISINK
Output Sink Current
VCC e 5.0V, VIN(1) e 5.0V, VOUT e VCC
1.75
mA
ISINK
Output Sink Current
VCC e 10V, VIN(1) e 10V, VOUT e VCC
8.0
mA
2
mA
AC Electrical Characteristics* TA e 25§ C, CL e 50 pF, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
MM54C00/MM74C00, MM54C02/MM74C02, MM54C04/MM74C04
tpd0, tpd1
Propagation Delay Time to
Logical ‘‘1’’ or ‘‘0’’
VCC e 5.0V
50
90
ns
VCC e 10V
30
60
ns
CIN
Input Capacitance
(Note 2)
6.0
pF
CPD
Power Dissipation Capacitance
(Note 3) Per Gate or Inverter
12
pF
MM54C10/MM74C10
tpd0, tpd1
Propagation Delay Time to
Logical ‘‘1’’ or ‘‘0’’
VCC e 5.0V
60
100
ns
VCC e 10V
35
70
ns
CIN
Input Capacitance
(Note 2)
7.0
pF
CPD
Power Dissipation Capacitance
(Note 3) Per Gate
18
pF
VCC e 5.0V
70
115
VCC e 10V
40
80
MM54C20/MM74C20
tpd0, tpd1
Propagation Delay Time to
Logical ‘‘1’’ or ‘‘0’’
ns
ns
CIN
Input Capacitance
(Note 2)
9
pF
CPD
Power Dissipation Capacitance
(Note 3) Per Gate
30
pF
*AC Parameters are guaranteed by DC correlated testing.
Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. Except for ‘‘Operating Temperature Range’’
they are not meant to imply that the devices should be operated at these limits. The table of ‘‘Electrical Characteristics’’ provides conditions for actual device
operation.
Note 2: Capacitance is guaranteed by periodic testing.
Note 3: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see 54C/74C Family Characteristics Application
NoteÐAN-90.
Typical Performance Characteristics
Gate Transfer Characteristics
Guaranteed Noise Margin
Over Temperature vs VCC
Power Dissipation vs Frequency
MM54C00/MM74C00,
MM54C02/MM74C02,
MM54C04/MM74C04
TL/F/5877 – 6
3
Typical Performance Characteristics
Propagation Delay vs
Ambient Temperature
MM54C00/MM74C00,
MM54C02/MM74C02,
MM54C04/MM74C04
(Continued)
Propagation Delay vs
Ambient Temperature
MM54C00/MM74C00,
MM54C02/MM74C02,
MM54C04/MM74C04
Propagation Delay Time vs
Load Capacitance
MM54C00/MM74C00,
MM54C02/MM74C02,
MM54C04/MM74C04
TL/F/5877 – 7
Propagation Delay Time vs
Load Capacitance
MM54C10/MM74C10
Propagation Delay Time vs
Load Capacitance
MM54C20/MM74C20
TL/F/5877 – 8
TL/F/5877 – 9
Switching Time Waveforms and AC Test Circuit
CMOS to CMOS
TL/F/5877 – 11
TL/F/5877 – 10
Note: Delays measured with input tr, tf s 20 ns.
4
Physical Dimensions inches (millimeters)
Ceramic Dual-In-Line Package (J)
Order Number MM54C00J, MM54C02J, MM54C04J, MM54C10J, MM54C20J,
MM74C00J, MM74C02J, MM74C04J, MM74C10J or MM74C20J
NS Package Number J14A
5
MM54C00/MM74C00, MM54C02/MM74C02, MM54C04/MM74C04,
MM54C10/MM74C10, MM54C20/MM74C20
Physical Dimensions inches (millimeters) (Continued)
Molded Dual-In-Line Package (N)
Order Number MM54C00N, MM54C02N, MM54C04N, MM54C10N, MM54C20N,
MM74C00N, MM74C02N, MM74C04N, MM74C10N or MM74C20N
NS Package Number N14A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Similar pages