EPCOS B65495-B-Y33 Miniature pot cores for adjustable miniature inductor Datasheet

PM/P/P Cores Halves/EP/TT/PR Cores
Series/Type:
P 4.6 x 4.1
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65496B20030000
B65496B20020000
B63399A10070000
B65496B20030000
Date of
Withdrawal
2003-08-08
2003-08-08
2003-08-08
Deadline Last
Orders
Last Shipments
2005-03-31
2004-02-29
2005-09-30
2004-08-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
P 4,6 × 4,1
Core
B65495
4,65 _ 0,19
3,7+0,15
1,1+0,1
Miniature pot cores
for adjustable miniature inductors
■ One of the two cores is equipped with an
internal thread for the adjusting screw
■ The unit can be fixed to the terminal
carrier by glue
ø2,2 _ 0,1
■ Space requirements of the inductor 5 × 5,1 mm
(without terminals)
■ Pot cores are supplied in sets
4,1_ 0,1
2,7+0,2
Magnetic characteristics (per set)
Σl/A
le
Ae
Ve
0,85+0,1
ø1,4+0,05
= 2,6 mm–1
= 7,6 mm
= 2,8 mm2
= 21,3 mm3
M1,2
FPK0337-9
Approx. weight 0,17 g/set
Ungapped
Material
AL value
µe
nH
Ordering code 1)
-K with thread
-B with center hole
M33
200 + 40/– 30 %
414
B65495-B-Y33
N30
800 + 40/– 30 %
1660
B65495-+-Y30
1) Replace the + by the code letter ”K“ or ”B“ for the required version.
308 08/01
P 4,6 × 4,1
Accessories
B65496
Coil former with positioning lug
Material:
Winding:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
see “Processing Notes”, page 155
Sections
AN
mm2
lN
mm
A R value
µΩ
Ordering code
1
0,8
9,5
400
B65496-B1000-T1
Positioning lug
0,35
ø2,67 _ 0,05
ø2,27+0,05
0,6+0,2
3,65 _ 0,08
0,7
AN
0,25
0,25
2,55 _ 0,07
FPK0273-Y
309 08/01
P 4,6 × 4,1
Accessories
B65496
Terminal carrier
Material:
GFR polyether ketone (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code natural
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Terminal carrier
Ordering code
With 4 solder terminals for PCB through-hole assembly
B65496-B2002
With 4 solder terminals for SMT
B65496-B2003
For PCB through-hole assembly
For SMT
0,5
2
Bend after
soldering
1,5
Nach
Löten
Benddem
after
umbiegen
soldering
0,9
6,9 _ 0,2
0,2
2,6 _ 0,3 1,5
0,5
0,4 x 0,2
0,4 x 0,2
5 _ 0,1
5 _ 0,1
0,4 x 0,2
0,4 x 0,2
5±0,3
5 _ 0,1
5 _ 0,1
Marking
of pin für
1 Stift 1
Kennzeichnung
Marking of pin 1
5,08
2,5
2,54
0,8
ø0,8+0,1
1,5
FPK0241-V
7,5
Hole arrangement
View in mounting direction
Recommended PCB layout
310 08/01
FPK0265-8
P 4,6 × 4,1
B63399
Accessories
B65496
Adjusting screw
● Tube core with thread and core brake made of polyacetal
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Adjusting screw
Min.
adjusting range
Tube core
∅ × length
mm
Material
1,25 × 1,2
K1
Ordering code
Color code
%
blue
10
B65496-A3001-X1
Adjusting screwdriver
B63399-A1007
Handle
B63399-B5
Adjusting screw
311 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages