Kingbright APD2520SYC03 4.5x2mm smd chip led lamp Datasheet

4.5x2mm SMD CHIP LED LAMP
Part Number: APD2520SYC03
Super Bright Yellow
Features
Description
z4.5x2mm
The Super Bright Yellow device is made with InGaAlP
zLOW
SMT LED,0.5mm THICKNESS
POWER CONSUMPTION.
zIDEAL
FOR BACKLIGHT AND INDICATOR.
zVARIOUS
COLORS AND LENS TYPES AVAILABLE.
zPACKAGE
: 1000PCS/REEL.
zMOISTURE
zRoHS
(on GaAs substrate) light emitting diode chip.
SENSITIVITY LEVEL : LEVEL 3.
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1075
REV NO: V.3
DATE: JUN/27/2007
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203001049
Selection Guide
Part No.
Dice
APD2520SYC03
Lens Type
Super Bright Yellow (InGaAlP)
Viewing
Angle [1]
Iv (mcd) [2]
@ 20mA
WATER CLEAR
Min.
Typ.
2θ1/2
110
450
20°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Super Bright Yellow
588
nm
IF=20mA
Spectral Line Half-width
Super Bright Yellow
28
nm
IF=20mA
C
Capacitance
Super Bright Yellow
25
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Yellow
2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1075
REV NO: V.3
DATE: JUN/27/2007
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203001049
Super Bright Yellow
APD2520SYC03
SPEC NO: DSAD1075
REV NO: V.3
DATE: JUN/27/2007
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203001049
APD2520SYC03
Recommended Soldering Pattern
(Units : mm;Tolerance:± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1075
REV NO: V.3
DATE: JUN/27/2007
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203001049
PACKING & LABEL SPECIFICATIONS
APD2520SYC03
SPEC NO: DSAD1075
REV NO: V.3
DATE: JUN/27/2007
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
ERP:1203001049
Similar pages