STMicroelectronics BYV10-40 Small signal schottky diode Datasheet

BYV 10- 40
®
SMALL SIGNAL SCHOTTKY DIODES
DESCRIPTION
Metal to silicon rectifier diodes in glass case featuring very low forward voltage drop and fast recovery
time, intended for low voltage switching mode
power supply, polarity protection and high frequency circuits.
DO 41
(Glass)
ABSOLUTE RATINGS (limiting values)
Symbol
Parameter
Value
Unit
IF(AV)
Average Forward Current*
Tamb = 60 °C
1
A
IFSM
Surge non Repetitive Forward Current
Tamb = 25°C
tp = 10ms
25
Sinusoidal Pulse
A
Tamb = 25°C
tp = 300µs
50
Rectangular Pulse
Tstg
Tj
Storage and Junction Temperature Range
TL
Maximum Lead Temperature for Soldering during 10s at 4mm
from Case
Symbol
VRRM
Parameter
Repetitive Peak Reverse Voltage
- 65 to + 150
- 65 to + 125
°C
°C
230
°C
BYV 10-40
Unit
40
V
Value
Unit
110
°C/W
* On infinite heatsink with 4mm lead length
THERMAL RESISTANCE
Symbol
Rth(j-a)
Test Conditions
Junction-ambient*
* On infinite heatsink with 4mm lead length
August 1998 Ed : 1A
1/4
BYV 10-40
ELECTRICAL CHARACTERISTICS
STATIC CHARACTERISTICS
Symbol
IR *
Test Conditions
Tj = 25°C
Min.
Typ.
VR = VRRM
IF = 1A
Unit
0.5
mA
10
Tj = 100°C
VF *
Max.
0.55
Tj = 25°C
IF = 3A
V
0.85
* Pulse test: tp ≤ 300µs δ < 2%.
DYNAMIC CHARACTERISTICS
Symbol
C
Test Conditions
Tj = 25°C
VR = 0
Min.
Typ.
220
Max.
Unit
pF
Forward current flow in a Schottky rectifier is due to
majority carrier conduction. So reverse recovery is
not affected by stored charge as in conventional PN
junction diodes.
Nevertheless, when the device switches from forward biased condition to reverse blocking state,
current is required to charge the depletion capacitance of the diode.
This current depends only of diode capacitance and
external circuit impedance. Satisfactory circuit behaviour analysis may be performed assuming that
Schottky rectifier consists of an ideal diode in parallel with a variable capacitance equal to the junction capacitance (see fig. 5 page 4/4).
Fig.1 : Forward current versus forward
voltage at low level (typical values).
Fig.2 : Forward current versus forward
voltage at high level (typical values).
2/4
BYV 10-40
Fig.3 : Reverse current versus junction
temperature.
Fig.4 : Reverse current versus VRRM in per
cent.
Fig.5 : Capacitance C versus reverse applied
voltage VR (typical values).
Fig.6 : Surge non repetitive forward current
for a rectangular pulse with t ≤ 10 ms.
3/4
BYV 10-40
Figure 7. Surge non repetitive forward current
versus number of cycles.
PACKAGE MECHANICAL DATA
DO 41 Glass
REF.
C
O
/D
A
C
Millimeters
O
/ B
O
/D
DIMENSIONS
Inches
Min.
Max.
Min.
Max.
A
4.07
5.20
0.160
0.205
B
2.04
2.71
0.080
0.107
C
28
D
0.712
1.102
0.863
0.028
0.034
Marking: clear, ring at cathode end.
Cooling method : by convection and conduction
Weight: 0.33g
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval
of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
© 1999 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.
http://www.st.com
4/4
Similar pages