Preliminary ◆Low Voltage Operation, CMOS Low Power Consumption C2xA series C2xB series ■APPLICATIONS :1.5V (MIN.) ~ 3.6V (MAX.) :1.8V (MIN.) ~ 3.6V (MAX.) ●Crystal oscillation modules ◆Oscillation Frequency Range 8MHz ~ 70MHz C2xA: Fundamental Oscillation 16MHz ~ 120MHz C2xB: Fundamental Oscillation ●Micro computers, DSP clocks ◆3-State Output ◆Built-in Capacitors Cg, Cd ◆Built-in Feedback Resistor ◆Chip form ◆Mini Mold SOT-26 Package ●Communication equipment ■GENERAL DESCRIPTION ■FEATURES The XC2165 series are CMOS ICs operates from supply voltage range from 1.5V to 3.6V with built-in crystal oscillator and divider circuits. Output is selectable from any one of the following values for f0 : f0/1, f0/2, f0/4, f0/8. With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator using only an external crystal. In stand-by mode, oscillation stops completely and output pin Q0 becomes in the state of high impedance. The XC2165 series are integrated into SOT-26 packages. The series is also available in chip form. Oscillation Frequency : C2xA series 8MHz ~ 70MHz (Fundamental) : C2xB series 16MHz ~ 120MHz (Fundamental) Divider Ratio : Selectable from f0/1, f0/2, f0/4, f0/8 Output : 3-State Operating Voltage Range : 1.5V ~ 3.6V ■PIN CONFIGURATION ●Various system clocks (C21B series: 1.8V ~ 3.6V) Low Current Consumption : Stand-by function included Chip Form (size) Ultra Small Package ■PIN ASSIGNMENT PIN NUMBER PIN NAME /INH 1 6 /XT XT 2 5 VDD VSS 3 4 Q0 SOT-26 (TOP VIEW) 30μA (MAX.) when stand-by : 800×1200μm : SOT-26 mini mold 1 2 3 4 5 6 FUNCTION / INH XT VSS Q0 VDD Stand-by Control * Crystal Oscillator Connection (Input) Ground Clock Output Power Supply Crystal Oscillator Connection /XT (Output) * Pull-up resistor is built-in to the stand-by control pin. 63 XC2165 Series ■BLOCK DIAGRAM ■/ INH, Q0 PIN FUNCTION VDD Q0 Rf Rup XT 1/2 1/2 1/2 VSS / INH Q0 ‘H’ or Open Clock Output ‘L’ High Impedance XT Cg Cd INH ■PRODUCT CLASSIFICATION ●Ordering Information XC2165 ①②③④⑤⑥ DESIGNATOR ① ② DESCRIPTION Duty Level Fixed Number ③ Divider Ratio ④ Oscillation Frequency ⑤ Chip Form & Package Type ⑥ Device Orientation SYMBOL C 2 1 2 4 8 A B C M T R L W DESCRIPTION : CMOS :: f0/1 : f0/2 : f0/4 : f0/8 : 8MHz ~ 70MHz : 16MHz ~ 120MHz : Chip form : SOT-26 package : Chip tray : Embossed tape, Standard feed : Embossed tape, Reverse feed : Wafer ■PACKAGING INFORMATION ●SOT-26 ■PAD DIMENSION Unit:μm ■PAD LAYOUT Size (Chip) Thickness (Chip) Backside (Chip) Aperture (Pad) : 800×1200μm : 200±20μm : GND level : 90×90μm PIN NUMBER PIN NAME 1 / INH 2 XT 3 / XT 4 5 6 7 VSS Q0 (NC) VDD FUNCTION Stand-by Control Crystal Oscillation Connection (Input) Crystal Oscillation Connection (Output) Ground Clock Output No Connection Power Supply PAD DIMENSIONS X Y - 236 - 436 - 79 - 436 79 - 436 236 236 - 78 - 236 - 436 436 436 436 *① Pull-up resistor is built-in to the stand-by control pin. 64 XC2165 Series ■MARKING RULE 6 5 4 ① Represents product series (Fixed marking) MARK 5 ① ② ③ ④ PRODUCT SERIES XC2165 series ② Represents oscillation frequency 1 2 3 MARK A B SOT-26 (TOP VIEW) OSCILLATION FREQUENCY C2xA: 8MHz ~ 70MHz (Fundamental) C2xB: 16MHz ~ 120MHz (Fundamental) ③ Represents divider ratio MARK A C DEVIDER RATIO f0/1 f0/4 MARK B D DEVIDER RATIO f0/2 f0/8 ④ Represents assembly lot number (based on internal standards) ■ABSOLUTE MAXIMUM RATINGS Ta=25℃ PARAMETER SYMBOL RATINGS UNITS Supply Voltage VDD VSS – 0.3 to VSS + 7.0 V / INH Pin Voltage VINH VSS – 0.3 to VDD + 0.3 V Q0 Pin Voltage VQ0 VSS – 0.3 to VDD + 0.3 V Q0 Output Current IQ0 ± 50 mA Power Dissipation Pd 150 * mW Operating Temperature Range Topr - 40 to + 85 ℃ Storage Temperature Range Tstg - 65 to + 150 (chip form) - 55 to + 125 (SOT-26) ℃ * SOT-26 Package: When implemented on a glass epoxy PCB. 65 XC2165 Series ■ELECTRICAL CHARACTERISTICS XC2165C2xAxx 1.8V Operation (Unless otherwise stated, VDD = 1.8V, f0=70MHz, No Load, Ta = - 40℃ ~ + 85℃) PARAMETER Operating Voltage Crystal Oscillation Frequency ‘H’ Level Input Voltage ‘L’ Level Input Voltage ‘H’ Level Output Voltage ‘L’ Level Output Voltage SYMBOL Supply Current 1 IDD1 Supply Current 2 Input Pull-Up Resistance 1 Input Pull-Up Resistance 2 IDD2 Rup1 Rup2 Cg Cd Internal Oscillation Capacity (*) Internal Oscillation Feedback Resistance Output Off Leak Current VDD Fosc VIH VIL VOH VOL FUNCTION /INH pin /INH pin Q0 pin, VDD=1.5V, IOH= - 2.0mA Q0 pin, VDD=1.5V, IOL= 2.0mA XC2165C21Axx /INH =Open, XC2165C22Axx f0=70MHz, XC2165C24Axx CL=15pF XC2165C28Axx /INH = 'L', f0 = 70MHz, CL=15pF /INH = ‘L’ /INH = 0.7VDD (*) (*) Rf Ioz VDD=3.6V, /INH = ‘L’ MIN. 1.5 8 0.7VDD 1.0 0.8 20 - TYP. 1.8 1.1 0.3 5.0 3.5 3.0 2.5 15 2.0 50 10 10 MAX. 3.6 70 0.3VDD 0.4 10.0 7.0 6.0 6.0 30 6.0 150 - UNIT V MHz V V V V 1.2 3.0 5.5 MΩ - - 1.0 μA mA μA MΩ kΩ pF pF (*) Designed value ■SWITCHING CHARACTERISTICS XC2165C2xAxx 1.8V Operation (Unless otherwise stated, VDD = 1.8V, f0=70MHz, CL=15pF, Ta = - 40℃ ~ + 85℃) PARAMETER Output Rise Time (*) Output Fall Time (*) Output Duty Cycle Oscillation Start Time (*) SYMBOL Tr Tf DUTY Tosc_on FUNCTION VDD=1.8V, CL=15pF (10% to 90%) VDD=1.8V, CL=15pF (10% to 90%) CL=15pF @ 0.5VDD f0=8MHz MIN. 40 - TYP. - MAX. 6.5 6.5 60 4.0 UNIT ns ns % ms (*) Designed value 66 XC2165 Series ■ELECTRICAL CHARACTERISTICS (Continued) XC2165C2xBxx 2.5V Operation (Unless otherwise stated, VDD = 2.5V, f0=120MHz, No Load, Ta = - 40℃ ~ + 85℃) PARAMETER Operating Voltage Crystal Oscillation Frequency ‘H’ Level Input Voltage ‘L’ Level Input Voltage ‘H’ Level Output Voltage ‘L’ Level Output Voltage SYMBOL VDD Fosc VIH VIL VOH VOL FUNCTION /INH pin /INH pin Q0 pin, VDD=1.8V, IOH= - 2.0mA Q0 pin, VDD=1.8V, IOL= 2.0mA XC2165C21Bxx XC2165C22Bxx XC2165C24Bxx XC2165C28Bxx Supply Current 1 IDD1 /INH =Open, f0=120MHz, CL=5pF Supply Current 2 Input Pull-Up Resistance 1 Input Pull-Up Resistance 2 IDD2 Rup1 Rup2 Cg Cd /INH = 'L', f0 = 120MHz, CL=5pF /INH = ‘L’ /INH = 0.7VDD (*) (*) Internal Oscillation Capacity (*) Internal Oscillation Feedback Resistance Output Off Leak Current Rf Ioz VDD=3.6V, /INH = ‘L’ MIN. 1.8 16 0.7VDD 1.3 0.8 20 ｖ TYP. 2.5 1.4 0.3 10.0 T.B.D. T.B.D. T.B.D. 15.0 2.0 50 10 10 MAX. 3.6 120 0.3VDD 0.4 20.0 T.B.D. T.B.D. T.B.D. 30.0 6.0 150 - UNIT V MHz V V V V 1.2 3.0 5.5 MΩ - - 1.0 μA mA μA MΩ kΩ pF pF (*) Designed value T.B.D.: To be determined ■SWITCHING CHARACTERISTICS (Continued) XC2165C2xBxx 2.5V Operation (Unless otherwise stated, VDD = 2.5V, f0=120MHz, CL=5pF, Ta = - 40℃ ~ + 85℃) PARAMETER Output Rise Time (*) Output Fall Time (*) Output Duty Cycle Oscillation Start Time (*) SYMBOL Tr Tf DUTY Tosc_on FUNCTION VDD=2.5V, CL=5pF (10% to 90%) VDD=2.5V, CL=5pF (10% to 90%) CL=5pF @ 0.5VDD f0=16MHz MIN. 40 - TYP. - MAX. 4.0 4.0 60 3.0 UNIT ns ns % ms (*) Designed value 67 XC2165 Series ■SWITCHING CHARACTERISTICS MEASUREMENT WAVEFORMS (1) Output Rise Time: Tr / Output Fall Time: Tf 0.9VDD 0.9VDD 0.1VDD 0.1VDD tr tf (2) Duty Cycle DUTY Measurement Level 0.5VDD TW T DUTY = (TW/T) x 100 [%] (3) Oscillation Start Time: Tosc_on / Oscillation Stop Time: Tosc_off *) VDD, INH_B Inpu t Waveform tr=tf=10n VIH VDD, /INH VIL Tosc_off Tosc_on Q0 Output (Hi-Z) 68