MA-COM MA4P1250-1072T High power pin diode Datasheet

MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Package Styles
Features
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
High Power Handling
Low Loss / Low Distortion
Voltage Ratings up to 1000 Volts
Passivated Chip for Low Leakage Current
Low Theta (θ) Due to Full Face Chip Bonding
Leadless Low Inductance MELF Packages
Various Package Options
Available as Chips
Fully RoHS Compliant
Non-Magnetic Packages Available for MRI
401 & 402
1072 & 1091
Description
Applications
M/A-COM Technology Solutions MELF and HIPAX
PIN diode series are designed for usage in switch
and attenuator applications requiring high power
handling and low distortion. The MELF and HIPAX
PIN diodes incorporate a fully passivated PIN diode
chip resulting in an extremely low reverse bias
leakage current. The semiconductor technology
utilized in the MELF and HIPAX families draws on
M/A-COM Tech’s substantial experience in PIN
diode design and wafer fabrication. The result is a
device which has a thick I-region and long carrier
lifetime while maintaining low series resistance and
capacitance values. The chips of the MELF and
HIPAX PIN diodes are enclosed in a rugged
ceramic package and is full face bonded to metal
pins on both the anode and cathode. The result is a
low loss PIN diode with low thermal resistance due
to symmetrical thermal paths. The parts are offered
in either magnetic or non-magnetic, HIPAX (axial
leaded) or Metal Electrode Leadless Faced (MELF)
surface mount packages for MRI applications. The
MELF is a rectangular SMQ, package which is
designed for high volume tape and reel assembly.
This easy to use package design makes automatic
pick and place, indexing and assembly, extremely
easy. The parallel flat surfaces are suitable for most
key jaw or vacuum pick-up techniques. All of the
solderable surfaces are tin plated and compatible
with industry standard reflow and vapor phase
soldering processes. See page 7 of Application
Note M538 on the M/A-COM Technology Solutions
website for a typical solder reflow profile.
HIPAX PIN diodes are designed for use in a wide
variety of switch and attenuator applications from HF
through UHF frequencies and at power levels above
1kW, CW. The internal chip as well as each diode
assembly has been comprehensively tested and
characterized to ensure predictable and repeatable
performance.
Design Recommendations
♦Low Distortion Attenuators
•MA4P4301B
♦Surface Mount Switches
•MA4P7101F
♦Cellular Radio Antenna Switches
• MA4P1200, MA4P1250
Absolute Maximum Ratings
TAMB = +25°C (Unless Otherwise Noted) 1
Parameter
Absolute Maximum
D.C. Reverse Voltage (VR)
(See Tables)
Operating Chip Junction
Temperature
-55°C to +175°C
Storage Temperature
-55°C to +200°C
Installation Temperature
ESD
+280°C for 30 Seconds
Class 1A, HBM
Notes
1. Operation of this device above any one of these
parameters may cause permanent damage.
1
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
MA4P1000 Series Electrical Specifications @ TAMB = +25°C
VR
Reverse Voltage
VDC
Part Number
Condition
(NM Indicates Non-Magnetic)
RS
Series Resistance
Ω
RP
Parallel Resistance
kΩ
Conditions
Conditions
Conditions
f = 1 MHz
VR = 50 V
f = 100 MHz
IF = 50 mA
f = 100 MHz
VR = 0 V
CT
Total Capacitance
pF
IR = 10 μA
MINIMUM
MAXIMUM
TYPICAL MAXIMUM TYPICAL MAXIMUM
RATING
100
1.2
1.5
0.5
0.75
100
1.2
1.5
0.5
0.75
MINIMUM
MA4P1200 - 401T
MA4P1200NM - 401T
50
50
MA4P1250 -1072T
50
100
0.8
1.2
0.5
0.75
5
MA4P1250NM -1072T
50
100
0.8
1.2
0.5
0.75
5
MA4P1450 -1091T
50
100
1.8
2.5
0.5
0.75
5
VF
Forward Voltage
Part Number
(Max. I
(NM Indicates Non-Magnetic)
Forward @
TL
Carrier Lifetime
5
5
Forward Bias
Reverse Bias
Harmonic Distortion Harmonic Distortion
R(2a/a) * R(3a/a)
R(2a/a) – R(3a/a)
1V ≤ 1.5A)
Condition
Conditions
Conditions
Conditions
IF = 50 mA
IF = 10 mA
f = 100 MHz
f = 100 MHz
TYPICAL
MAXIMUM
MINIMUM TYPICAL MINIMUM TYPICAL MINIMUM TYPICAL
RATING
1.0
2
8
80
90
60
70
MA4P1200 - 401T
0.85
MA4P1200NM - 401T
0.85
1.0
2
8
80
90
60
70
MA4P1250 -1072T
0.85
1.0
2
8
80
90
60
70
MA4P1250NM -1072T
0.85
1.0
2
8
80
90
60
70
MA4P1450 -1091T
0.85
1.0
2
8
80
90
60
70
*Notes:
1.) “NM” in the base part number signifies non-magnetic package.
2.) “T” suffix denotes tape and reel
Power Dissipation and Thermal Resistance Ratings @ TAMB = +25°C
Package
Style
2
CONDITION
MA4P1200(NM)-401T
PDISS
θJC
1.5 W
15°C/W
5.5W
MA4P1250(NM)-1072T
PDISS
θJC
—
—
B
Axial Lead
No Heatsink
F
MELF
No Heatsink
6W
Infinite Heatsink
18W
Lead Length 1/4"
—
—
15°C/W
MA4P1450-1091T
PDISS
θJC
—
—
—
10W
30W
—
5°C/W
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P1200 Series
Capacitance vs. Frequency & Reverse Bias
Capacitance
Series Resistance
Series Resistance @ 100 MHz vs. Forward Current
Ω
pF
MHz
Frequency
Forward Current
Heatsink Temperature vs. Max. Power Dissipation
Ω
MHz
Frequency
3
Watts
Maximum Power Dissipation
Parallel Resistance
Parallel Resistance vs. Frequency & Reverse Bias
°C
Heatsink Temperature
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P1250 Series
Capacitance vs. Frequency & Reverse Bias
Capacitance
Series Resistance
Series Resistance @ 100 MHz vs. Forward Current
Ω
MHz
Frequency
Forward Current
Carrier Lifetime vs. Forward Bias Current
Carrier Lifetime
Parallel Resistance
Parallel Resistance vs. Frequency & Reverse Bias
Ω
MHz
Frequency
4
pF
Forward Current
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P1450 Series
Capacitance vs. Frequency and Reverse Bias
Capacitance
Series Resistance
Series Resistance @ 100 MHz vs. Forward Current
Ω
pF
MHz
Forward Current
Frequency
Parallel Resistance
Parallel Resistance vs. Frequency and Reverse Bias
Ω
MHz
Frequency
5
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
MA4P4000 - MA4P7100 Series Electrical Specifications @ TAMB = +25°C
MA4P4000
Series
MA4P4300
Series
MA4P7000
Series
MA4P7100
Series
0.5 Ω
1.0 Ω
0.9 Ω
0.5 Ω
VR = 100 V
2.2 pF
2.0 pF
0.7 pF
1.0 pF
RP
VR = 100 V
20 kΩ
50 kΩ
200 kΩ
100 kΩ
Minimum Carrier Lifetime
TL
IF = 10 mA
20 µs
15 µs
5 µs
2.5 µs
Maximum Forward Voltage
VF
IF = 100 mA
1.0 V
1.2 V
1.0 V
1.0 V
Maximum Reverse Current
IR
At max. rated voltage
1 µA
1 µA
1 µA
1 µA
Nominal I-Region Width
μ
—
175 µm
300 µm
175 µm
100 µm
Parameter
Symbol
Maximum Series Resistance
RS
Maximum Total Capacitance
CT
Minimum Parallel Resistance
Condition
IF = 100 mA
Maximum Reverse Voltage Rating ( VR )
Maximum Reverse
Voltage Rating
MA4P4000
Series
MA4P4300
Series
MA4P7000
Series
100 Volts
MA4P4001B-402
MA4P4001BNM-402
MA4P4001F-1091T
MA4P4301B-402
MA4P4301F-1091T
MA4P7001F-1072T
MA4P7101B-401T
MA4P7101F-1072T
200 Volts
MA4P4002B-402
MA4P4002F-1091T
MA4P4302B-402
MA4P7002B-401T
MA4P7002F-1072T
MA4P7102B-401T
MA4P7102F-1072T
400 Volts
—
—
600 Volts
MA4P4006F-1091T
MA4P4006B-402
MA4P7100
Series
MA4P7104B-401T
MA4P7104F-1072T
—
MA4P7006B-401T
MA4P7006F-1072T
—
—
*Notes:
1.) “NM” in the base part number signifies non-magnetic package.
2.) “T” suffix denotes tape and reel
MA4P4000
Series
PDISS
θJC
MA4P4300
Series
PDISS
θJC
MA4P7000
Series
PDISS
θJC
MA4P7100
Series
PDISS
θJC
1/4” Lead Length
12 W
12.5°C/W
10 W
15°C/W
5W
30°C/W
6W
25°C/W
No Heatsink
2.5 W
—
2.5 W
—
1.5 W
—
1.5 W
—
F
MELF
Infinite Heatsink
7.5 W
20°C/W
5W
30°C/W
10 W
15°C/W
Both B and F
Single 1 µs pulse
100 kW
—
100 kW
—
15 kW
—
Both B and F
Single 100 µs pulse
5 kW
0.03°C/W
5 kW
Package Style
B
Axial Leaded
6
Condition
0.03°C/W 300 W 0.5°C/W
11.5 W 13°C/W
15 kW
—
300 W 0.5°C/W
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P4000,MA4P4300, MA4P7000, MA4P7100 Series
Series Resistance at 100 MHz vs. Forward Current
MA4P7000, MA4P7100 Series
Series Resistance
Series Resistance
Series Resistance at 100 MHz vs. Forward Current
MA4P4000, MA4P4300 Series
Ω
Ω
Forward Current
Forward Current
Carrier Lifetime vs. Forward Bias Current
MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series
Carrier Lifetime
Thermal Resistance
Thermal Resistance vs. Pulse Width
MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series
°C/W
µS
Forward Current
Pulse Width
7
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series
Capacitance vs. Frequency & Reverse Bias
MA4P4300 Series
Capacitance
Capacitance
Capacitance vs. Frequency & Reverse Bias
MA4P4000 Series
pF
pF
MHz
MHz
Frequency
Frequency
Capacitance vs. Frequency & Reverse Bias
MA4P7100 Series
8
Capacitance
Capacitance
Capacitance vs. Frequency & Reverse Bias
MA4P7000 Series
pF
pF
MHz
MHz
Frequency
Frequency
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Typical Performance Curves @ TAMB = +25°C
MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P4300 Series
Parallel Resistance
Parallel Resistance
Parallel Resistance vs. Reverse Bias & Frequency
MA4P4000 Series
Ω
Ω
Volts
Reverse Bias
Volts
Reverse Bias
Ω
Volts
Reverse Bias
9
Parallel Resistance vs. Reverse Bias & Frequency
MA4P7100 Series
Parallel Resistance
Parallel Resistance
Parallel Resistance vs. Reverse Bias & Frequency
MA4P7000 Series
Ω
Volts
Reverse Bias
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Case Styles
401 Axial Leaded Packages
402 Axial Leaded Packages
Cathode Band
Cathode Band
B
C
A
B
INCHES
MIN. MAX. MIN. MAX.
—
—
0.130
—
0.090
C 0.975
100pcs/bag
2.29
24.77
—
D 0.027 0.029 0.69
MAX
A
—
0.230
—
5.84
B
—
0.140
—
3.56
24.77
—
MA4P4001B-402
MA4P4001BNM-402
MA4P4002B-402
MA4P4006B-402
MA4P4301B-402
MA4P4302B-402
INCHES
C 0.975
Solderable
Surfaces
B
A
Solderable
Surfaces
C
INCHES
MM
1072 Package
(tape and reel only)
1500 or 5000pcs/reel
MIN. MAX. MIN. MAX.
A 0.138 0.155 3.51
3.94
B 0.181 0.191 4.57
4.85
C 0.011 0.026 0.279 0.660
Data Sheets contain information regarding a product M/A-COM Technology Solutions
10 ADVANCED:
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
specify when ordering
Dimension
Dimension
MA4P1450-1091T
MA4P4001F-1091T
MA4P4002F-1091T
MA4P4006F-1091T
MA4P4301F-1091T
1.04
Cathode
A
B
C
500pcs/reel
MIN. MAX.
1072 MELF Surface Mount Packages
Cathode
A
1091 Package
(tape and reel only)
MM
D 0.039 0.041 0.99
0.74
1091 MELF Surface Mount Packages
A
MIN.
3.30
—
C
A
402 Package
(bulk only)
MM
D
Dimension
MA4P1200-401T
MA4P1200NM-401T
MA4P7002B-401T
MA4P7006B-401T
MA4P7101B-401T
MA4P7102B-401T
MA4P7104B-401T
Dimension
500 or 1000pcs/reel
specify when ordering
C
C
A
401 Package
(tape and reel only)
B
D
INCHES
MM
MIN. MAX. MIN. MAX.
MA4P1250-1072T
A 0.080 0.095 2.032 2.413
MA4P1250NM-1072T
MA4P7001F-1072T
MA4P7002F-1072T
B 0.115 0.125 2.921 3.175
MA4P7006F-1072T
MA4P7101F-1072T
C 0.008 0.023 0.203 0.584
MA4P7104F-1072T
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
MELF Assembly Recommendations
♦ Devices may be soldered using standard 60Sn/40Pb or RoHS compliant solders. Axial leads and solderable
surfaces of MELF devices are tin plated 50 μm thick to ensure an optimum connection.
MELF Internal Construction
Circuit Pad Layout for MELF Diodes
Dimension
Package Style
1072
Package Style
1091
inches
mm
inches
mm
A
0.093
2.36
0.150
3.81
B
0.050
1.27
0.050
1.27
C
0.060
1.52
0.100
2.54
A
B
C
B
Ordering Information
MELF diodes are available in tape and reel in quantities as shown in table below
Package Style
Quantity (7” Reel)
Bulk Devices Per Bag
1072T
1500 or 5000
N/A
1091T
500
N/A
Tape and reel information can be found on the M/A-COM website at http://www.macomtech.com/Application Notes/pdf/M513.pdf
Data Sheets contain information regarding a product M/A-COM Technology Solutions
11 ADVANCED:
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P MELF & HIPAX™Series
High Power PIN Diodes
V14
Axial Leaded HIPAX Assembly Recommendations
♦ Bends on case styles 401 and 402, axially leaded devices, must be made while holding the lead firm and forming the
bend no closer than .060 inches from the body of the part. Bending the lead < 0.060 inches from the body of the part
is not recommended and may cause internal damage to the chip. Appropriate fixturing should be used.
♦ Devices may be soldered using standard 60Sn/40Pb or any RoHS compliant solders. Axial leads are tin plated 50μm
thick to ensure an optimum connection.
♦ For recommended Sn/Pb and RoHS soldering profiles see page 7 of Application Note M538 on the M/A-COM Tech-
Case Style 401 & 402
Internal Construction
Case Style 401 & 402
Minimum Bend Distance
Cathode Band
.060” Min
Passivated Chip
.060” Min
Ordering Information
Axial leaded diodes are available in tape and reel or bulk in quantities shown in the table below
Package Style
Quantity Per Reel
Bulk Devices Per Bag
401T
500 or 1000 (specify qty. when ordering)
N/A
N/A
100
402
Environmental Ratings
HIPAX PIN diodes are designed to meet most environmental and electrical requirements and may be ordered
screened to MIL-STD-750 specifications as described in the table below.
TEST
METHOD
DESCRIPTION/ CONDITIONS
Moisture Resistance
High Temperature Storage
HTRB
Temperature Shock
Fine Leak
Constant Acceleration
Solderability
Tension1
Lead Fatigue1
1021
1031
1038
1051
1071 Cond. H
2006
2026
2036.3 Cond. A
2036.3 Cond. E
85°C, 85% Relative Humidity, 168 hrs
+175°C , 250 Hours
80% of rated VR, 50°C, 96 Hours
-65°C to +175°C, 20 Cycles
1 X 10-7 CC/Sec
20,000 G’s
IPC/JDEC J-STD-02
2 Lbs., 30 Seconds
3 Cycles, 8 oz., 90°,
Note:
1) Test applicable to HIPAX axially leaded devices only.
Data Sheets contain information regarding a product M/A-COM Technology Solutions
12 ADVANCED:
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
Similar pages