NAIS JW1ASN-DC9V Compact pc board power relay Datasheet

VDE
COMPACT PC BOARD
POWER RELAY
28.6
.1.126
JW RELAYS
FEATURES
12.8
.504
20.0
.787
mm inch
• Miniature package with universal terminal footprint
• High dielectric withstanding for transient protection:
10,000 V surge in µs between coil and contact
• Sealed construction
• Class B coil insulation types available
• TV rated (TV-5) types available (only for 1 Form A type)
• VDE, TÜV, SEMKO, SEV, FIMKO, TV-5 also approved
SPECIFICATIONS
Contact
Characteristics
Standard type
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching capacity
Max. switching
Rating
power
(resistive
Max. switching
load)
voltage
Max. switching
current
Mechanical
Expected (at 180 cpm)
life (min.
Electrical (at 6 cpm)
ope.)
(Resistive load)
High capacity type
1 Form A, 1 Form C,
1 Form A, 1 Form C
2 Form A, 2 Form C
100 mΩ
Silver alloy
5 A 250 V AC,
10 A 250 V AC,
5 A 30 V DC
10 A 30 V DC
1,250 VA, 150 W
2,500 VA, 300 W
250 V AC, 30 V DC
5A
10 A
5×106
105
Coil
Nominal operating power
530 mW
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Detection current: 10mA
*2 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 24).
*8 When using relays in a high ambient temperature, consider the pick-up voltage
rise due to the high temperature (a rise of approx. 0.4% V for each 1°C 33.8°F
with 20°C 68°F as a reference) and use a coil impressed voltage that is within the
maximum allowable voltage range.
Standard type
High capacity type
Max. operating speed (at
6 cpm
rated load)
Initial insulation resistance
Min. 1,000 MΩ at 500 V DC
1,000 Vrms for 1 min.
Between
open
contacts
Initial
5,000 Vrms for 1 min.
breakdown Between contacts and coil
voltage*1
Between contact sets 3,000 Vrms for 1 min. (2 Form A, 2 Form C)
Initial surge voltage between
Min. 10,000 V
contacts and coil*2
Operate time*3
Max. 15 ms
(at nominal voltage)
3
Release time (without diode)*
Max. 5 ms
(at nominal voltage)
Temperature rise (at 20°C)
1a: max. 39°C
1a: max. 45°C
(at nominal voltage)
1c: max. 55°C
1c, 2a, 2c: max. 55°C
(with nominal coil voltage and at
(resistance method) (resistance method)
nominal switching capacity)
Functional*4
Min. 98 m/s2 {10 G}
Shock
resistance Destructive*5
Min. 980 m/s2 {100 G}
Approx. 98 m/s2 {10 G}, 10 to 55 Hz at
Functional*6
double amplitude of 1.6 mm
Vibration
resistance
Approx. 117.6 m/s2 {12 G}, 10 to 55 Hz
Destructive
at double amplitude of 2.0 mm
Conditions for operation, Ambient
–40°C to +85°C –40°F to +185°F
transport and storage*7
temp.*8
(Not freezing and condensHumidity
5 to 85% R.H.
ing at low temperature)
Unit weight
Approx. 13 g .46 oz
TYPICAL APPLICATIONS
1. Home appliances
TV sets, VCR, Microwave ovens
2. Office machines
Photocopiers, Vending machines
3. Industrial equipment
NC machines, Robots, Temperature
controllers
85
JW
ORDERING INFORMATION
Ex. JW
Contact arrangement
1
F
Contact capacity
S
N
B
Protective construction
DC5V
Pick-up voltage
1: 1 Form C
Nil: Standard (5 A)
S: Sealed type
N: 70% of nominal
1a: 1 Form A
F: High capacity
voltage
2: 2 Form C
(10 A)*
2a: 2 Form A
*Only for 1 Form A and 1 Form C type
UL/CSA, VDE, SEMKO, FIMKO, SEV approved type is standard.
Notes: 1. When ordering TV rated (TV-5) types, add suffix-TV (available only for 1 Form A type).
2. Standard packing: Carton: 100 pcs. Case: 500 pcs.
Coil insulation class
Coil voltage
Nil: Class E insulation
B: Class B insulation
DC 5, 6, 9,
12, 18, 24,
48 V
TYPES
Standard (5A) types
Contact arrangement
1 Form A
1 Form C
Coil voltage, V DC
5
6
9
12
18
24
48
5
6
9
12
18
24
48
Part No.
JW1aSN-DC5V
JW1aSN-DC6V
JW1aSN-DC9V
JW1aSN-DC12V
JW1aSN-DC18V
JW1aSN-DC24V
JW1aSN-DC48V
JW1SN-DC5V
JW1SN-DC6V
JW1SN-DC9V
JW1SN-DC12V
JW1SN-DC18V
JW1SN-DC24V
JW1SN-DC48V
Contact arrangement
Part No.
JW1aFSN-DC5V
JW1aFSN-DC6V
JW1aFSN-DC9V
JW1aFSN-DC12V
JW1aFSN-DC18V
JW1aFSN-DC24V
JW1aFSN-DC48V
Contact arrangement
2 Form A
2 Form C
Coil voltage, V DC
5
6
9
12
18
24
48
5
6
9
12
18
24
48
Part No.
JW2aSN-DC5V
JW2aSN-DC6V
JW2aSN-DC9V
JW2aSN-DC12V
JW2aSN-DC18V
JW2aSN-DC24V
JW2aSN-DC48V
JW2SN-DC5V
JW2SN-DC6V
JW2SN-DC9V
JW2SN-DC12V
JW2SN-DC18V
JW2SN-DC24V
JW2SN-DC48V
Coil voltage, V DC
5
6
9
12
18
24
48
Part No.
JW1FSN-DC5V
JW1FSN-DC6V
JW1FSN-DC9V
JW1FSN-DC12V
JW1FSN-DC18V
JW1FSN-DC24V
JW1FSN-DC48V
High capacity (10 A) types
Contact arrangement
1 Form A
Coil voltage, V DC
5
6
9
12
18
24
48
1 Form C
COIL DATA (at 20°C 68°F)
Nominal voltage,
V DC
Pick-up voltage,
V DC (max.)
(Initial)
Drop-out voltage,
V DC (min.)
(Initial)
Nominal operating
current, mA
(±10%)
5
6
9
12
18
24
48
3.5
4.2
6.3
8.4
12.6
16.8
33.6
0.5
0.6
0.9
1.2
1.8
2.4
4.8
106
88
58
44
29
22
11
86
Coil resistance,
Ω
(±10%)
47
68
155
270
611
1,100
4,400
Nominal operating
power, mW
Max. allowable
voltage
130% V of
Nominal Voltage
(at 60°C 140°F)
530
120% V of
Nominal Voltage
(at 85°C 185°F)
JW
DIMENSIONS
mm inch
1 Form A
20
.787
0.4
.016
2.4
.094
3.5
.138
0.5 3.6
.020 .142
0.3
.012
1.1
.043
12.8
.504
7.6
.299
0.4
.016
7.6
.299
4-1.3 dia.
4-.051 dia.
Relay outline
0.3
.012
Tolerance: ±0.1 ±.004
2.4
.094
2.4
.094
Wiring diagram (Bottom view)
20
.787
2.4
.094
3.5 3.5
.138 .138
16.5
.650
COM
5-1.3 dia.
5-.051 dia.
7.6
.299
3.6
0.5
.020 .142
0.3
.012
0.5
.020
Relay outline
Tolerance: ±0.1 ±.004
1.1
.043
Wiring diagram (Bottom view)
3.5
.138
3.5
.138
28.6
1.128 16.5
.650
N.O.
3.5
.138
28.6
1.126
20
.787
PC board pattern
(Copper-side view)
20
.787
12.8
.504
0.3
.012
1 Form C
PC board pattern
(Copper-side view)
N.O.
COM
N.C.
Stand-off
COIL
COIL
0.9
.035
Dimension :
Max. 1mm .039 inch
1 to 3mm .039 to .118 inch
Min. 3mm .118 inch
0.8
.031
General tolerance
±0.1 ±.004
±0.2 ±.008
±0.3 ±.012
7.6
.299
12.8
.504
2 Form C
2 Form A
PC board pattern
(Copper-side view)
0.4
.016
0.3
.012
0.3
.012
1.3
.051
0.5
.020
20
.787
1.3
.051
5
.197
20
.787
PC board pattern
(Copper-side view)
0.4
.016
6-1.3 dia.
6-.051 dia.
7.5
.295
3.6
.142
Tolerance: ±0.1 ±.004
1.1
.043
Wiring diagram (Bottom view)
5
.197
COM
28.6
1.128 20
.787
6-1.3 dia.
6-.051 dia.
7.5
.295
Tolerance: ±0.1 ±.004
N.O.
COM
N.C.
COIL
0.8
.031
Dimension :
Max. 1mm .039 inch
1 to 3mm .039 to .118 inch
Min. 3mm .118 inch
15
.591
Wiring diagram (Bottom view)
COIL
0.8
.031
7.5
.299
12.8
.504
5
5
.197 .197
Relay outline
5
.197
5
.197
28.6
1.128
15
.591
N.O.
1.3
.051
0.5 3.6
.020 .142
0.3
.012
0.5
.020
0.3
.012
1.1
1.3
.043
.051
Relay outline
20
.787
7.5
.295
12.8
.504
General tolerance
±0.1 ±.004
±0.2 ±.008
±0.3 ±.012
REFERENCE DATA
1-(1). Maximum operating power
1-(2). Maximum operating power
2-(1). Life curve
1 Form A Standard (5 A) type
1 Form A High Capacity (10 A) type
1 Form A Standard (5 A) type
100
10
1
DC resistive load
10
AC resistive
load
100
Contact voltage, V
100
10
1
1,000
Life, ×104
Contact current, A
Contact current, A
100
DC resistive load
10
AC resistive
load
100
Contact voltage, V
250 V AC resistive load (cosϕ =1.0)
30 V DC resistive load
10
1,000
5
10
15
Contact current, A
87
JW
2-(2). Life curve
3-(1). Operate/release time
3-(2). Operate/release time
1 Form A High Capacity (10 A) type
Sample: JW1aSN-DC12V, 10 pcs.
Ambient temperature: 20°C 68°F
Sample: JW1aFSN-DC12V, 10 pcs.
Ambient temperature: 20°C 68°F
250 V AC resistive load (cosϕ =1.0)
30 V DC resistive load
10
10
Operate time
Max.
xMin.
5
Release time
5
10
0
15
80
90
100
Operate/release time, ms
Life, ×104
100
Operate/release time, ms
10
Operate time
Max.
xMin.
5
Release time
Max.
xMin.
110
0
120
80
Coil applied voltage, %V
Contact current, A
90
100
3-(3). Operate/release time
3-(4). Operate/release time
3-(5). Operate/release time
Sample: JW2aSN-DC24V, 6 pcs.
Ambient temperature: 20°C 68°F
Sample: JW2SN-DC12V, 6 pcs.
Ambient temperature: 20°C 68°F
9
8
7
6
Max.
xMin.
Max.
x-x
Min.
5
4
3
2
1
80
90
100
110
120
14
9
13
8
12
Operate time
10
Max.
xMin.
8
6
4
Release time
130
80
Coil applied voltage, %V
90
100
110
4-(2). Coil temperature rise
(Contact carrying current: 10 A)
Sample JW1aFSN-DC12V, 6 pcs.
Point measured: Inside the coil
Sample: JW1aFSN-DC12V, 6 pcs.
Point measured: Inside the coil
40
30
Temperature rise, °C
Temperature rise, °C
60°C
85°C
50
40
30
10
10
100
120
140
Coil applied voltage, %V
160
60°C
85°C
50
20
0
100
120
140
Coil applied voltage, %V
120
7
Operate time
6
Max.
xMin.
5
4
Release time
3
Max.
xMin.
2
1
0
80
90
100
110
120
130
Coil applied voltage, %V
25°C
60
20
0
88
70
25°C
60
120
Coil applied voltage, %V
4-(1). Coil temperature rise
(Contact carrying current: 5A)
70
Max.
xMin.
2
Operate/release time, ms
10
Operate/release time, ms
Operate/release time, ms
11
110
Coil applied voltage, %V
Sample: JW1SN-DC12V, 6 pcs.
Ambient temperature: 20°C 68°F
13
12
Max.
xMin.
160
JW
ACCESSORIES
FEATURES
1. Space saving design
2. Wiring can be done with ease (DIN terminal)
For 1 poles
DIN terminal
Socket
For 2 poles
N.C. contact raw
N.C. contact raw
N.O. contact raw
N.O. contact raw
COM contact raw
COM contact raw
Coil terminal raw
Coil terminal raw
TYPES
Product name
Number of
poles
Part No.
1
JW1-SFD
2
JW2-SFD
1
2
1
2
JW1-PS
JW2-PS
JW1-SS
JW2-SS
JW1 DIN terminal socket
(with hold-down clip)
JW2 DIN terminal socket
(with hold-down clip)
JW1 PC board socket
JW2 PC board socket
JW1 Plug-in socket
JW2 Plug-in socket
Applicable relay type
1 Form C
2 Form A
1 Form A
•
2 Form C
Standard packing
Inner carton
Outer case
•
•
•
•
•
•
•
10 pcs.
•
•
•
•
100 pcs.
SPECIFICATIONS
PC board socket/Plug-in socket
1 pole
2 poles
1,500 vrms for 1 minute
Min. 100 MΩ
Type
Item
Breakdown voltage
Insulation resistance
DIMENSIONS
1. DIN terminal socket
mm inch
2. PC board socket
PC board pattern (Bottom view)
20.6±0.6
.811±.024
7.5±0.2
.295±.008
1
8
3
6
5±0.3
.197±.012
DIN terminal socket
1 pole
2 poles
1,500 Vrms for 1 minute
1,000 Vrms for 1 minute
Min. 100 MΩ
13±0.6
.512±.024
67±1
2.638±.039
6.5 dia.
.256 dia.
6.5
.256
5-1.3 dia.
5-.051 dia.
32±0.6
1.260±.024
35.4±0.5
1.394±.020
7.6
.299
(4.4)
(.173)
15±0.3
.591±.012
5±0.3
.197±.012
4.3±0.3
.169±.012
3.5
.138
3.5 dia.
.138 dia.
5
7
4
2
3±0.3
.118±.012
1 Form A
1 Form C
0.8±0.1
.031±.004
21±0.6
.827±.024
28.5±0.6
1.122±.024
21.5±0.6
.846±.024
6.7±0.3
.264±.012
4±0.6
.157±.024
Pre-soldering
16.5
.650 3.5
.138
3.5
.138
2 Form A
2 Form C
0.3±0.1
.012±.004
0.35±0.1
.014±.004
8-1.3 dia.
8-.051 dia.
7.5
.295
(4)
(.157)
15
5 5
.591 .197 .197
Tolerance: ±0.1 ±.004
3. Plug-in socket
Panel cut-out
(Thickness: 1.0 to 2.0 .039 to .079)
13±0.6
.512±.024
37±0.6
1.457±.024
1±0.3
.039±.012
36.4±0.6
1.433±.024
25.4±0.6
1.000±.024
34.9
1.374
11.9
.469
Tolerance: ±0.1 ±.004
2±0.3
.079±.012
2±0.3
.079±.012
8.6±0.3
.339±.012
8±0.6
.315±.024
1.9±0.3
.075±.012
Details of
terminal portion
For Cautions for Use, see Relay Technical Information (Page 11 to 39).
12/27/2002
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
89
Go To Online Catalog
Similar pages