Fairchild MTC16 1-of-8 decoder/demultiplexer Datasheet

Revised July 2003
74AC138 • 74ACT138
1-of-8 Decoder/Demultiplexer
General Description
Features
The AC/ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar
memory chip select address decoding. The multiple input
enables allow parallel expansion to a 1-of-24 decoder
using just three AC/ACT138 devices or a 1-of-32 decoder
using four AC/ACT138 devices and one inverter.
■ ICC reduced by 50%
■ Demultiplexing capability
■ Multiple input enable for easy expansion
■ Active LOW mutually exclusive outputs
■ Outputs source/sink 24 mA
■ ACT138 has TTL-compatible inputs
Ordering Code:
Order Number
Package Number
74AC138SC
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74AC138SJ
74AC138MTC
MTC16
74AC138PC
Package Description
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
74ACT138SC
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74ACT138SJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74ACT138PC
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Connection Diagram
Logic Symbols
IEEE/IEC
Pin Descriptions
Pin Names
Description
A0–A2
Address Inputs
E1–E2
Enable Inputs
E3
Enable Input
O0–O7
Outputs
FACT is a trademark of Fairchild Semiconductor Corporation.
© 2003 Fairchild Semiconductor Corporation
DS009925
www.fairchildsemi.com
74AC138 • 74ACT138 1-of-8 Decoder/Demultiplexer
November 1988
74AC138 • 74ACT138
Truth Table
Inputs
Outputs
E1
E2
E3
A0
A1
A2
O0
O1
O2
O3
O4
O5
O6
H
X
X
X
X
X
H
H
H
H
H
H
H
H
X
H
X
X
X
X
H
H
H
H
H
H
H
H
X
X
L
X
X
X
H
H
H
H
H
H
H
H
L
L
H
L
L
L
L
H
H
H
H
H
H
H
L
L
H
H
L
L
H
L
H
H
H
H
H
H
L
L
H
L
H
L
H
H
L
H
H
H
H
H
L
L
H
H
H
L
H
H
H
L
H
H
H
H
L
L
H
L
L
H
H
H
H
H
L
H
H
H
L
L
H
H
L
H
H
H
H
H
H
L
H
H
L
L
H
L
H
H
H
H
H
H
H
H
L
H
L
L
H
H
H
H
H
H
H
H
H
H
H
L
H = HIGH Voltage Level
L = LOW Voltage Level
O7
X = Immaterial
Functional Description
Logic Diagram
The AC/ACT138 high-speed 1-of-8 decoder/demultiplexer
accepts three binary weighted inputs (A0, A1, A2) and,
when enabled, provides eight mutually exclusive activeLOW outputs (O0–O7). The AC/ACT138 features three
Enable inputs, two active-LOW (E1, E2) and one activeHIGH (E3). All outputs will be HIGH unless E1 and E2 are
LOW and E3 is HIGH. This multiple enable function allows
easy parallel expansion of the device to a 1-of-32 (5 lines
to 32 lines) decoder with just four AC/ACT138 devices and
one inverter (see Figure 1). The AC/ACT138 can be used
as an 8-output demultiplexer by using one of the active
LOW Enable inputs as the data input and the other Enable
inputs as strobes. The Enable inputs which are not used
must be permanently tied to their appropriate active-HIGH
or active-LOW state.
Please note that this diagram is provided only for the understanding of logic
operations and should not be used to estimate propagation delays.
FIGURE 1. Expansion to 1-of-32 Decoding
www.fairchildsemi.com
2
Recommended Operating
Conditions
−0.5V to +7.0V
Supply Voltage (VCC)
DC Input Diode Current (IIK)
VI = −0.5V
−20 mA
VI = VCC + 0.5V
+20 mA
DC Input Voltage (VI)
Supply Voltage (VCC)
−0.5V to VCC + 0.5V
VO = VCC + 0.5V
+20 mA
0V to VCC
−40°C to +85°C
Minimum Input Edge Rate (∆V/∆t)
AC Devices
DC Output Source
VIN from 30% to 70% of VCC
±50 mA
VCC @ 3.3V, 4.5V, 5.5V
125 mV/ns
Minimum Input Edge Rate (∆V/∆t)
DC VCC or Ground Current
±50 mA
per Output Pin (ICC or IGND)
Storage Temperature (TSTG)
0V to VCC
Operating Temperature (TA)
−0.5V to VCC + 0.5V
or Sink Current (IO)
4.5V to 5.5V
Output Voltage (VO)
−20 mA
DC Output Voltage (VO)
2.0V to 6.0V
ACT
Input Voltage (VI)
DC Output Diode Current (IOK)
VO = −0.5V
AC
ACT Devices
−65°C to +150 °C
VIN from 0.8V to 2.0V
Junction Temperature (TJ)
VCC @ 4.5V, 5.5V
140°C
PDIP
125 mV/ns
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power
supply, temperature, and output/input loading variables. Fairchild does not
recommend operation of FACT circuits outside databook specifications.
DC Electrical Characteristics for AC
Symbol
VIH
Parameter
Minimum HIGH Level
Input Voltage
VIL
VOH
TA = +25°C
VCC
(V)
Typ
3.0
1.5
TA = −40°C to +85°C
Guaranteed Limits
2.1
2.1
4.5
2.25
3.15
3.15
5.5
2.75
3.85
3.85
Maximum LOW Level
3.0
1.5
0.9
0.9
Input Voltage
4.5
2.25
1.35
1.35
5.5
2.75
1.65
1.65
Minimum HIGH Level
3.0
2.99
2.9
2.9
Output Voltage
4.5
4.49
4.4
4.4
5.5
5.49
5.4
5.4
3.0
2.56
2.46
4.5
3.86
3.76
5.5
4.86
4.76
Units
Conditions
VOUT = 0.1V
V
or VCC − 0.1V
VOUT = 0.1V
V
or VCC − 0.1V
V
IOUT = −50 µA
VIN = VIL or VIH
VOL
IOH = −12 mA
V
IOH = −24 mA
IOH = −24 mA (Note 2)
Maximum LOW Level
3.0
0.002
0.1
0.1
Output Voltage
4.5
0.001
0.1
0.1
5.5
0.001
0.1
0.1
3.0
0.36
0.44
4.5
0.36
0.44
5.5
0.36
0.44
5.5
±0.1
±1.0
µA
VI = VCC, GND
75
mA
VOLD = 1.65V Max
−75
mA
VOHD = 3.85V Min
40.0
µA
VIN = VCC or GND
V
IOUT = 50 µA
VIN = VIL or VIH
IIN
Maximum Input
(Note 4)
Leakage Current
IOLD
Minimum Dynamic
IOHD
Output Current (Note 3)
5.5
ICC
(Note 4)
Maximum Quiescent
Supply Current
5.5
5.5
4.0
IOL = 12 mA
V
IOL = 24 mA 0
IOL = 24 mA (Note 2)
Note 2: All outputs loaded; thresholds on input associated with output under test.
Note 3: Maximum test duration 2.0 ms, one output loaded at a time.
Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.
3
www.fairchildsemi.com
74AC138 • 74ACT138
Absolute Maximum Ratings(Note 1)
74AC138 • 74ACT138
DC Electrical Characteristics for ACT
Symbol
Parameter
Minimum HIGH Level
VIH
VIL
VOH
TA = +25°C
VCC
(V)
Typ
4.5
1.5
TA = −40°C to +85°C
Guaranteed Limits
2.0
2.0
Input Voltage
5.5
1.5
2.0
2.0
Maximum LOW Level
4.5
1.5
0.8
0.8
Units
V
or VCC − 0.1V
VOUT = 0.1V
V
Input Voltage
5.5
1.5
0.8
0.8
Minimum HIGH Level
4.5
4.49
4.4
4.4
Output Voltage
5.5
5.49
5.4
5.4
3.86
3.76
Conditions
VOUT = 0.1V
or VCC − 0.1V
V
IOUT = −50 µA
V
IOH = −24 mA
VIN = VIL or VIH
4.5
5.5
VOL
IOH = −24 mA (Note 5)
4.86
4.76
Maximum LOW Level
4.5
0.001
0.1
0.1
Output Voltage
5.5
0.001
0.1
0.1
4.5
0.36
0.44
5.5
0.36
0.44
5.5
±0.1
±1.0
µA
VI = VCC, GND
V
IOUT = 50 µA
V
IOL 24 mA
VIN = VIL or VIH
IIN
Maximum Input
Leakage Current
ICCT
Maximum
IOL.= 24 mA (Note 5)
1.5
mA
VI = VCC − 2.1V
IOLD
Minimum Dynamic
5.5
75
mA
VOLD = 1.65V Max
IOHD
Output Current (Note 6)
5.5
−75
mA
VOHD = 3.85V Min
ICC
Maximum Quiescent
40.0
µA
VIN = VCC or GND
5.5
ICC/Input
Supply Current
0.6
5.5
4.0
Note 5: All outputs loaded; thresholds on input associated with output under test.
Note 6: Maximum test duration 2.0 ms, one output loaded at a time.
AC Electrical Characteristics for AC
Symbol
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
Parameter
VCC
TA = +25°C
(V)
CL = 50 pF
TA = −40°C to +85°C
CL = 50 pF
(Note 7)
Min
Typ
Max
Min
Max
Propagation Delay
3.3
1.5
8.5
13.0
1.5
15.0
An to On
5.0
1.5
6.5
9.5
1.5
10.5
Propagation Delay
3.3
1.5
8.0
12.5
1.5
14.0
An to On
5.0
1.5
6.0
9.0
1.5
10.5
Propagation Delay
3.3
1.5
11.0
15.0
1.5
16.0
E1 or E2 to On
5.0
1.5
8.0
11.0
1.5
12.0
Propagation Delay
3.3
1.5
9.5
13.5
1.5
15.0
E1 or E2 to On
5.0
1.5
7.0
9.5
1.5
10.5
Propagation Delay
3.3
1.5
11.0
15.5
1.5
16.5
E3 to On
5.0
1.5
8.0
11.0
1.5
12.5
Propagation Delay
3.3
1.5
8.5
13.0
1.5
14.0
E3 to On
5.0
1.5
6.0
8.0
1.0
9.5
Note 7: Voltage Range 3.3 is 3.3V ± 0.3V
Voltage Range 5.0 is 5.0V ± 0.5V
www.fairchildsemi.com
4
Units
ns
ns
ns
ns
ns
ns
Symbol
tPLH
Parameter
Propagation Delay
An to On
tPHL
Propagation Delay
An to On
tPLH
Propagation Delay
E1 or E2 to On
tPHL
Propagation Delay
E1 or E2 to On
tPLH
Propagation Delay
E3 to On
Propagation Delay
tPHL
E3 to On
VCC
TA = +25°C
(V)
CL = 50 pF
TA = −40°C to +85°C
CL = 50 pF
Units
(Note 8)
Min
Typ
Max
Min
Max
5.0
1.5
7.0
10.5
1.5
11.5
ns
5.0
1.5
6.5
1.5
11.5
ns
5.0
2.5
8.0
11.5
2.0
12.5
ns
5.0
2.0
7.5
11.5
2.0
12.5
ns
5.0
2.5
8.0
12.0
2.0
13.0
ns
5.0
2.0
6.5
10.5
1.5
11.5
ns
10.5
Note 8: Voltage Range 5.0 is 5.0V ± 0.5V
Capacitance
Typ
Units
CIN
Symbol
Input Capacitance
Parameter
4.5
pF
VCC = OPEN
CPD
Power Dissipation Capacitance
60.0
pF
VCC = 5.0V
5
Conditions
www.fairchildsemi.com
74AC138 • 74ACT138
AC Electrical Characteristics for ACT
74AC138 • 74ACT138
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M16A
www.fairchildsemi.com
6
74AC138 • 74ACT138
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M16D
7
www.fairchildsemi.com
74AC138 • 74ACT138
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC16
www.fairchildsemi.com
8
74AC138 • 74ACT138 1-of-8 Decoder/Demultiplexer
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
9
www.fairchildsemi.com
Similar pages