Thinki MUR3060PT 30.0 ampere dual common anode ultra fast recovery rectifier Datasheet

MUR3020PTR thru MUR3060PTR
®
Pb
MUR3020PTR thru MUR3060PTR
Pb Free Plating Product
30.0 Ampere Dual Common Anode Ultra Fast Recovery Rectifiers
TO-3P/TO-247AD
Unit: inch (mm)
Features
.050(1.25)
.045(1.15)
.839(21.3)
.819(20.8)
.798(20.25)
.777(19.75)
.126(3.2)
.110(2.8)
.030(0.75)
.017(0.45)
Cases: TO-3P/TO-247AD molded plastic
Terminals: Pure tin plated, lead free solderable per
MIL-STD-750. Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 10in-lbs. Max.
Weight: 0.2 ounce, 5.6 gram approximately
.600(15.25)
.580(14.75)
.095(2.4)
Mechanical Data
.199(5.05)
.175(4.45)
.142(3.6)
.125(3.2)
.170(4.3)
.145(3.7)
.640(16.25)
.620(15.75)
Dual rectifier construction, positive center-tap
Plastic package has Underwriters Laboratory
Flammability Classification 94V0
Glass passivated chip junctions
Superfast recovery time, high voltage
Low forward voltage, high current capability
Low thermal resistance
Low power loss, high efficiency
High temperature soldering guaranteed:
o
260 C, 0.16”(4.06mm)from case for 10 seconds
.087(2.2)
.070(1.8)
.225(5.7)
.204(5.2)
.225(5.7)
.204(5.2)
Positive
Common Cathode
Suffix "PT"
Negative
Common Anode
Suffix "PTR"
Doubler
Tandem Polarity
Suffix "PTD"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
MUR3020PT MUR3040PT MUR3060PT
MUR3020PTR MUR3040PTR MUR3060PTR UNIT
MUR3020PTD MUR3040PTD MUR3060PTD
Maximum Recurrent Peak Reverse Voltage
VRRM
200
400
600
V
Maximum RMS Voltage
VRMS
140
280
420
V
VDC
200
400
600
V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
o
Current TC=125 C
IF(AV)
30.0
A
IFSM
300
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
(JEDEC method)
Maximum Instantaneous Forward Voltage
@ 15.0 A
VF
0.98
o
Maximum DC Reverse Current @TJ=25 C
o
At Rated DC Blocking Voltage @TJ=125 C
IR
1.3
1.7
V
10
uA
500
uA
Maximum Reverse Recovery Time (Note 1)
Trr
35
nS
Typical junction Capacitance (Note 2)
CJ
150
pF
TJ, TSTG
-55 to +150
Operating Junction and Storage
Temperature Range
o
C
NOTES : (1) Reverse recovery test conditions IF = 0.5A IR = 1. 0A Irr = 0.25A.
(2) Thermal Resistance junction to terminal.
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/
MUR3020PTR thru MUR3060PTR
®
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
FIG.1 - FORWARD CURRENT DERATING CURVE
300
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
30
25
20
15
10
5
60 Hz Resistive or
Inductive load
0
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
250
200
150
100
50
0
0
50
100
150
1
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
100
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
150
MUR3040PTR
MUR3020PTR
15
MUR3060PTR
1.0
o
TJ=25 C
PULSE WIDTH=300uS
1% DUTY CYCLE
0.1
0.2
0.4
0.6
0.8
1.0
1.2
100
NUMBER OF CYCLES AT 60Hz
o
LEAD TEMPERATURE, C
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
10
1.4
o
TJ=125 C
10
1
0.1
o
TJ=25 C
0.01
1.6
0
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
FIG.5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
1000
o
TJ = 25 C
f = 1.0 MHZ
Vsig = 50mVp-p
100
10
0.1
1.0
4.0
10
100
REVERSE VOLTAGE, VOLTS
.
Rev.04/2014
© 2006 Thinki Semiconductor Co.,Ltd.
.
.
Page 2/2
http://www.thinkisemi.com/
Similar pages