ROHM TDZ30

TDZ30
Diodes
Zener diode
TDZ30
zApplications
Constant voltage control
zDimensions (Unit : mm)
zLand size figure (Unit : mm)
㩷
㪇㪅㪈㪎㫧㪇㪅㪈
䇭䇭㩷㩷㩷㩷㩷㩷㪇㪅㪇㪌
㪈㪅㪈
㪈㪅㪊㫧㪇㪅㪇㪌
㪇㪅㪏 㪇㪅㪌
㪈㪅㪐㫧㪇㪅㪈
㪉㪅㪌㫧㪇㪅㪉
㪉㪅㪇
zFeatures
1) Small mold type. (TUMD2)
2) High reliability.
3) Can be mounted automatically,
using chip mounter.
㪫㪬㪤㪛㪉
zConstruction
Silicon epitaxial planar
zStructure
㪇㪅㪏㫧㪇㪅㪇㪌
㪇㪅㪍㫧㪇㪅㪉
㪩㪦㪟㪤㩷㪑㩷㪫㪬㪤㪛㪉
䇭䇭䇭㩷㪇㪅㪈
㪻㫆㫋㩷㩿㫐㪼㪸㫉㩷㫎㪼㪼㫂㩷㪽㪸㪺㫋㫆㫉㫐㪀㩷㪂㩷㪻㪸㫐
㪜㪯㪅㩷㩷㪫㪛㪱㪌㪅㪈
z Taping specifications (Unit : mm)
㪏㪅㪇㫧㪇㪅㪉
㪉㪅㪎㪌
㪈㪅㪋㪊㫧㪇㪅㪇㪌
㪋㪅㪇㫧㪇㪅㪈
㱢㪈㪅㪇㫧㪇㪅㪉
䇭䇭䇭䇭䇭㪇
㪉㪅㪏㫧㪇㪅㪇㪌
㪇㪅㪉㪌㫧㪇㪅㪇㪌
㪊㪅㪌㫧㪇㪅㪇㪌
㱢㪈㪅㪌㪌㫧㪇㪅㪈
䇭䇭䇭䇭䇭㩷㩷㪇
㪈㪅㪎㪌㫧㪇㪅㪈
㪉㪅㪇㫧㪇㪅㪇㪌
㪋㪅㪇㫧㪇㪅㪈
㪇㪅㪐㫧㪇㪅㪇㪏
zAbsolute maximum ratings (Ta=25qC)
Parameter
Power dissipation
Junction temperature
Storage temperature
Operating resistance
Symbol
P
Tj
Tstg
Topr
Limits
500
150
-55 to 㪈㪌㪇
-55 to 㪈㪌㪇
Unit
mW
㷄
㷄
㷄
Rev.D
1/4
TDZ30
Diodes
zElectrical characteristics (Ta=25qC)
Symbol
TYP.
Zener voltage 䋺Vz(V)
Reverse current 䋺
IR(uA㪀
MIN.
MAX.
Iz(mA)
MAX. VR(V)
TDZ 5.1
4.60
5.60
10
10
1.5
TDZ 5.6
5.10
6.10
10
10
2.5
TDZ 6.2
5.60
6.80
10
10
3.0
TDZ 6.8
6.20
7.40
10
10
3.5
TDZ 7.5
6.80
8.30
10
10
4.5
TDZ 8.2
7.40
9.00
10
10
4.9
TDZ 9.1
8.20
10.00
10
10
5.5
TDZ 10
9.00
11.00
10
10
6.0
TDZ 11
9.90
12.10
10
10
7.0
TDZ 12
10.80
13.20
10
10
8.0
TDZ 13
11.70
14.30
10
10
9.0
TDZ 15
13.50
16.50
10
10
10.0
TDZ 16
14.40
17.60
10
10
11.0
TDZ 18
16.20
19.80
10
10
12.0
TDZ 20
18.00
22.00
10
10
14.0
TDZ 22
19.80
24.20
10
10
15.0
TDZ 24
21.60
26.40
10
10
16.0
TDZ 27
24.30
29.70
10
10
19.0
TDZ 30
27.00
33.00
10
10
21.0
(ϧ)The zener voltage(Vz) is measured 40ms after power is supplied.
(Ϩ)The operating resistances(Zz,Zzk) are measured by superimposing a minute alternating current
on the regulated current(Iz)
zType No.
UZQF
TDZ‫ޓ‬5.1
TDZ‫ޓ‬5.6
TDZ‫ޓ‬6.2
TDZ‫ޓ‬6.8
TDZ‫ޓ‬7.5
TDZ‫ޓ‬8.2
TDZ‫ޓ‬9.1
TDZ‫ޓ‬10
TDZ‫ޓ‬11
TDZ‫ޓ‬12
㪫㪰㪧㪜䇭㪥㪦㪅
A2
C2
E2
F2
H2
J2
L2
05
15
25
UZQF
TDZ‫ޓ‬13
TDZ‫ޓ‬15
TDZ‫ޓ‬16
TDZ‫ޓ‬18
TDZ‫ޓ‬20
TDZ‫ޓ‬22
TDZ‫ޓ‬24
TDZ‫ޓ‬27
TDZ‫ޓ‬30
㪫㪰㪧㪜䇭㪥㪦㪅
35
45
55
65
75
85
95
A5
C5
Rev.D
2/4
TDZ30
Diodes
zElectrical characteristic curves (Ta=25qC)
㪈㪇
㪇㪅㪈
㪍㪅㪏
㪐㪅㪈
㪍㪅㪉
㪇㪅㪇㪈
㪎㪅㪌
㪌㪅㪍
㪏㪅㪉
㪈㪇
㪌㪅㪈
㪈㪍
㪈㪉
㪉㪇
㪈㪏
㪈㪊
㪈㪈
㪉㪋
㪉㪉
㪊㪇
㪉㪎
㪈㪌
㪇㪅㪇㪇㪈
㪇
㪌
㪈㪇
㪈㪌
㪉㪇
㪉㪌
㪊㪇
㪊㪌
㪋㪇
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀
㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇㪇
㪌㪇㪇
㪩㪜㪭㪜㪩㪪㪜㩷㩷㩷㪪㪬㪩㪞㪜㩷㪤㪘㪯㪠㪤㪬㪤
㪧㪦㪮㪜㪩㪑㪧㪩㪪㪤㩿㪮㪀
㪧㪦㪮㪜㪩㩷㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪻㩿㫄㪮㪀
㪍㪇㪇
㪋㪇㪇
㪊㪇㪇
㪉㪇㪇
㪈㪇㪇
㪇
㪉㪌
㪌㪇
㪎㪌
㪈㪇㪇
㪈㪉㪌
㪧㪩㪪㪤
㪈㪇㪇
㪈㪇
㪈㪌㪇
㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀
㪧㪻㪄㪫㪸䇭㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇
㪊㪇
㪈㪌
㪇㪅㪇㪋
㪈㪇
㪇㪅㪇㪉
㪌
㪇
㪇
㪄㪌
㪄㪇㪅㪇㪉
㪊㪇
㪊㪌
㪫㪩㪘㪥㪪㪠㪜㪥㪫
㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀
㪉㪇
㪇㪅㪇㪍
㪈㪇
㪈㪌
㪉㪇
㪉㪌
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀
㱏㫑㪄㪭㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇㪅㪈
㪈
㪈㪇
㪈㪇㪇
㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻
㪠㪤㪔㪈㪇㫄㪘
㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿㫄㪭㪆㷄㪀
㪉㪌
㪇㪅㪇㪏
㪌
㪇㪅㪇㪈
㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀
㪧㪩㪪㪤㪄㪫㪠㪤㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇㪅㪈
㪇
㫋
㪈㪇㪇㪇
㪈
㪇㪅㪇㪇㪈
㪇
㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿䋦㪆㷄㪀
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪈
㪈㫄㫊
㪠㪝㪔㪇㪅㪌㪘
㫋㫀㫄㪼
㪩㫋㪿㩿㫁㪄㪸㪀
㪊㪇㪇㫌㫊
㪈㪇㪇
㪩㫋㪿㩿㫁㪄㪺㪀
㪈㪇
㪇㪅㪇㪇㪈
㪇㪅㪇㪈
㪇㪅㪈
㪈
㪈㪇
㪈㪇㪇
㪫㪠㪤㪜㪑㫋㩿㫊㪀
㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇
Rev.D
3/4
TDZ30
Diodes
㪈㪇
㪫㪸㪔㪈㪉㪌㷄
㪇㪅㪈
㪇㪅㪇㪈
㪈㪇
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪫㪸㪔㪄㪉㪌㷄
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀
㪫㪸㪔㪎㪌㷄
㪈
㪇㪅㪈
㪫㪸㪔㪉㪌㷄
㪇㪅㪇㪈
㪫㪸㪔㪄㪉㪌㷄
㪇㪅㪇㪇㪈
㪇㪅㪇㪇㪇㪈
㪉㪍
㪉㪎
㪉㪏
㪉㪐
㪊㪇
㪊㪈
㪊㪉
㪊㪊
㪊㪋
㪊㪌
㪇
㪊㪍
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀
㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇
㪈㪌
㪉㪇
㪈㪇
㪈
㪉㪌
㪇
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀
㪇㪅㪐
㪉㪐㪅㪐
㪉㪐㪅㪏
㪘㪭㪜㪑㪉㪐㪅㪏㪏㪭
㪉㪐㪅㪍
㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪫㪸㪔㪉㪌㷄
㪭㪩㪔㪈㪅㪇㪭
㫅㪔㪈㪇㫇㪺㫊
㪇㪅㪏
㪇㪅㪎
㪇㪅㪍
㪇㪅㪌
㪇㪅㪋
㪇㪅㪊
㪇㪅㪉
㪌
㪈㪇
㪈㪌
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀
㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪉㪇
㪉㪇㪇
㪈
㪫㪸㪔㪉㪌㷄
㪠㪱㪔㪌㫄㪘
㫅㪔㪊㪇㫇㪺㫊
㪊㪇
㪈㪇㪇
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀
㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪊㪇㪅㪈
㪉㪐㪅㪎
㪌
㪘㪭㪜㪑㪇㪅㪇㪏㪉㫅㪘
㪈㪐㪇
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪽㪔㪈㪤㪟䌺
㪫㪸㪔㪎㪌㷄
㪈
㪇㪅㪇㪇㪈
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀
㪈㪇㪇㪇
㪫㪸㪔㪈㪉㪌㷄
㪈㪇㪇
㪫㪸㪔㪉㪌㷄
㪈㪎㪇
㪈㪍㪇
㪈㪌㪇
㪈㪋㪇
㪈㪊㪇
㪘㪭㪜㪑㪈㪈㪎㪅㪈㫇㪝
㪈㪉㪇
㪇㪅㪈
㪈㪈㪇
㪇
㪈㪇㪇
㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪫㪸㪔㪉㪌㷄
㪭㪩㪔㪇㪭
㪽㪔㪈㪤㪟㫑
㫅㪔㪈㪇㫇㪺㫊
㪈㪏㪇
㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪛㪰㪥㪘㪤㪠㪚㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪱㫑㩿㱅㪀
㪈㪇㪇㪇㪇
㪈㪇㪇㪇
㪈㪇㪇
㪈㪇
㪈
㪇㪅㪈
㪈
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪱㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇
Rev.D
4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2008 ROHM CO.,LTD.
THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0