GLENAIR M85049-49-52S20W Strain relief Datasheet

Strain
Reliefs
AS85049/52, MS3417, and M83723/15S
Strain Reliefs
Glenair Connector
Designator A
MIL-DTL-5015 Series 3400,
MIL-DTL-26482 Series 2,
AS81703 Series 3,
MIL-DTL-83723 Series I &
III, 40M39569, DEF 5326-3,
EN 2997, EN 3646,
ESC 10, ESC 11, LN 29504,
NFC93422 Series HE302,
PAN 6432-1, PAN 6432-2,
PATT 602
M85049/52 S 10 W
Basic Part No.
Material and Finish Designator
A = Aluminum, Black Anodize
N = Aluminum, Electroless Nickel
W = Aluminum, 1,000 Hour Cadmium
Olive Drab Over Electroless
Nickel
S = Self-Locking
-1- = Non-Self-Locking
Dash No.
MS3417-10 A
Basic Part No.
(Non-Self-Locking Only)
Dash No.
M83723/15S-10 A
Basic Part No.
(Non-Self-Locking Only)
SUPERCEDED SPEC.
Material and Finish Designator
A = Aluminum, 1,000 Hour Cad. Olive
Drab Over Electroless Nickel
C = Aluminum, Cadmium Olive Drab
G = Aluminum, Black Anodize
N = Aluminum, Electroless Nickel
SUPERCEDED SPEC.
Finish Designator
A = Non-Conductive, Black Anodize
R = Conductive, Electroless Nickel
Dash No.
A Thread
E Dia
Self Locking
Only
© 2005 Glenair, Inc.
Cable
Entry
F
Self Locking
Only
G
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
62-22
Strain
Reliefs
AS85049/52, MS3417, and M83723/15S
Strain Reliefs
TABLE I
A Thread
E Dia Max
Dash
Class 2B
Self-Locking
No.
.562 - 24 UNEF
n/a
3*+
.500 - 20 UNF
.885 (22.5)
8
.625 - 24 UNEF
1.010 (25.7)
10
.750 - 20 UNEF
1.135 (28.8)
12
.875 - 20 UNEF
1.260 (32.0)
14
1.000 - 20 UNEF
1.385 (35.2)
16
1.062 - 18 UNEF
1.510 (38.4)
18
1.188 - 18 UNEF
1.635 (41.5)
20
1.313 - 18 UNEF
1.760 (44.7)
22
1.438 - 18 UNEF
1.885 (47.9)
24
2.135 (54.2)
28+ 1.750 - 18 UNS
2.395 (60.8)
32+ 2.000 - 18 UNS
2.635 (66.9)
36+ 2.250 - 16 UN
2.885 (73.3)
40+ 2.500 - 16 UN
3.135 (79.6)
44+ 2.750 - 16 UN
3.385 (86.0)
48+ 3.000 - 16 UN
n/a
61*+ 1.500 - 18 UNEF
* Not Available in Self Locking
+
Not Available under M83723/15S
F Max
Self-Locking
n/a
.73 (18.5)
.85 (21.6)
.98 (24.9)
.98 (24.9)
1.10 (27.9)
1.35 (34.3)
1.48 (37.6)
1.60 (40.6)
1.73 (43.9)
1.88 (47.8)
2.13 (54.1)
2.44 (62.0)
2.63 (66.8)
3.00 (76.2)
3.40 (86.4)
n/a
G
±.020
(.5)
.732 (18.6)
.732 (18.6)
.812 (20.6)
.968 (24.6)
1.026 (26.1)
1.299 (33.0)
1.431 (36.3)
1.537 (39.0)
1.633 (41.5)
1.755 (44.6)
2.000 (50.8)
2.366 (60.1)
2.476 (62.9)
2.546 (64.7)
2.840 (72.1)
3.324 (84.4)
1.755 (44.6)
Cable Entry
Max
Min
.204 (5.2)
.125 (3.2)
.204 (5.2)
.125 (3.2)
.286 (7.3)
.187 (4.7)
.416 (10.6)
.291 (7.4)
.476 (12.1)
.351 (8.9)
.626 (15.9)
.501 (12.7)
.706 (17.9)
.518 (13.2)
.831 (21.1)
.581 (14.8)
.956 (24.3)
.644 (16.4)
1.081 (27.5)
.706 (17.9)
1.187 (30.1)
.750 (19.1)
1.250 (31.8)
.875 (22.2)
1.375 (34.9)
.938 (23.8)
1.500 (38.1)
.938 (23.8)
1.750 (44.5)
1.188 (30.2)
1.875 (47.6)
1.312 (33.3)
1.081 (27.5)
.706 (17.9)
1. For complete dimensions see applicable Military Specification.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable Entry is defined as the accomodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
62-23
Similar pages