HVM** Features Controlled avalanche characteristic combined with the ability to dissipate reverse power Plastic package has underwriters laboratory lammability classification 94V-0 Low forward voltage drop Typical IR less than 1 uA High overload surge capability High temperature soldering guaranteed 260-C/10s/.375" (9.5mm) lead length at 5 lbs., (2.3kg) tension Mechanical data Case: Reliable low cost construction utilizing We declare that the material of product molded plastic technique compliance with RoHS requirements. Terminals: Axial leads. Solderable per MIL-STD-202 Method 208 Polarity: Color band denotes cathode end Weight: 2.6 g 1.Electrical Characteristic Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol HVM5 HVM8 HVM10 HVM12 HVM15 HVM16 HVM18 Unit Maximum repetitive peak reverse voltage VRRM 5 8 10 12 15 16 18 KV Maximum RMS voltage VRMS 3.5 5.6 7 8.4 10.5 11.2 12.6 KV Maximum DC blocking voltage VDC 5 8 10 12 15 16 18 KV Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55-C IO 350 mA IFSM 30 A TJ,TSTG -40 to +130 -C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction and storage temperature range Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. HVM1 Parameter Symbol HVM5 HVM8 HVM10 HVM12 HVM15 HVM16 Unit 8 Maximum instantaneous forward voltage at 0.35A Maximum DC reverse current at rated DC blocking voltage TA=25-C VF IR 10.0 12 14 10.0 16 V μA HVM** 2.Ratings and Characteristic Curves(TA= 25°C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Fig. 1 - Forward Current Derating Curve Number of Cycles at 60 Hz Fig.4-Typical Instantaneous Forward Charcteristics Peak Forward Surge Current (A) Instantaneous Reverse Current (μA) Fig. 3 - Typical Reverse Characteristics Percent of Rated Peak Reverse Voltage Vollts HVM8 HVM10 HVM12 Instantaneous Forward Voltage Vollts HVM14 HVM16 HVM18 HVM** 3. dimension: 文件编号: LRC/M06-051 第 3 版 第 0 次修改 第 2 页 塑封生产线高压硅堆产品包装规范 5.1.1 塑料袋 塑料袋规格: 110×150mm 5.1.2 内盒 材料:单瓦楞纸 ROHS标签 LRC标签 客户标识 H H W 单位:mm L 尺寸 LRC标签 成型规格 LRC产品 产品重复峰 压值 产品额定电 产品数量 产品生产日 期 L 360±2 W 137±2 H 65±4 文件编号: LRC/M06-051 第 3 版 第 0 次修改 第 3 页 塑封生产线高压硅堆产品包装规范 5.1.3 外箱 材料:双瓦楞纸 H 单位:mm 尺寸 L W H 475±2 335±2 380±4 W L 5.2.包装数量 5.2.1 袋装要求: 每个塑料袋内装50PCS不打端子的高压硅堆或双向二极管、一张合格证、一袋干燥剂; 每个塑料袋内装20PCS打端子的高压硅堆或双向二极管、一张合格证、一袋干燥剂; 5.2.2 盒装要求: 每盒装16代不打端子的高压硅堆或双向二极管 每盒装25代打端子的高压硅堆或双向二极管 5.2.3 外箱要求: 每箱装10个内盒 5.2.4 标签要求: 客户标识 ROHS标签 LRC标签 塑封生产线高压硅堆产品包装规范 5.3产品出厂检验报告 每批出货时,需要附上出厂检验报告 5.4环保标签: 5.5. 无卤(无卤产品才贴) Green 文件编号: LRC/M06-051 第 3 版 第 0 次修改 第 4 页 文件编号: LRC/M06-051 第 3 版 第 0 次修改 第 5 页 塑封生产线高压硅堆产品包装规范 6、版式次更新记录 版次 1 更新记录 第一版 更新作者 余波 更新日期 2011年9月28日 HVM** 4.Update Record 版次 更新记录 更新作者 更新日期 1 第一版 余波 2010-5-25