Murata HPR423C 0.75 watt miniature sip dc/dc converter Datasheet

HPR4XXC
0.75 Watt Miniature SIP DC/DC Converter
PRODUCT OVERVIEW
The HPR4XXC Series uses advanced circuit design and packaging technology to realize superior reliability
and performance. A 170kHz push-pull oscillator is used in the input stage. The HPR4XXC Series reduces
beat-frequency oscillation problems when used with high frequency isolation amplifiers. Reduced parts
count and high efficiency add to the reliability of the HPR4XXC Series.
The high efficiency of the HPR4XXC Series means less internal power dissipation, as low as 190mW.
With less heat to dissipate the HPR4XXC Series can operate at higher temperatures with no degradation of
reliable operation. In addition, the high efficiency of the HPR4XXC Series means the series is able to offer
greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability
of the series, although this product has a >1mA minimum load for specifications purposes.
The HPR4XXC Series provides high isolation in a very small package. The use of surface mounted
devices and manufacturing technologies makes it possible to offer premium performance and low cost.
FEATURES
High Isolation Voltage: 3000 VPK Test
High Output Power Density: 10 Watts/Inch3
Single-In-Line Package (SIP)
Extended Temperature Range: -25°C to +85°C
Internal Input and Output
High Efficiency to 79%
Low Cost
RoHS Compliant
Non-Conductive Case
SPECIFICATIONS All specifications are typical at TA = +25°C nominal input voltage unless otherwise specified.
PRODUCT SELECTION CHART
MODEL
HPR400C
HPR401C
HPR402C
HPR403C
HPR404C
HPR405C
HPR406C
HPR407C
HPR408C
HPR409C
HPR410C
HPR411C
HPR412C
HPR413C
HPR414C
HPR415C
HPR416C
HPR417C
HPR418C
HPR419C
HPR420C
HPR421C
HPR422C
HPR423C
NOMINAL
INPUT
VOLTAGE
(VDC)
RATED
OUTPUT
VOLTAGE
(VDC)
RATED
OUTPUT
CURRENT
(mA)
5
5
5
5
5
5
12
12
12
12
12
12
15
15
15
15
15
15
24
24
24
24
24
24
5
12
15
±5
±12
±15
5
12
15
±5
±12
±15
5
12
15
±5
±12
±15
5
12
15
±5
±12
±15
150
62
50
±75
±30
±25
150
62
50
±75
±30
±25
150
62
50
±75
±30
±25
150
62
50
±75
±30
±25
INPUT CURRENT (mA) REFLECTED
RIPPLE
NO LOAD RATED LOAD
CURRENT
(mA)
TYP MAX
(mAp-p)
20
20
20
20
20
20
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
8
8
8
216
212
212
218
212
220
90
81
81
88
81
81
72
72
72
72
63
63
48
48
45
45
45
45
235
235
235
245
235
220
100
90
90
98
90
90
80
80
80
80
70
66
53
53
50
50
50
50
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
15
15
15
15
15
15
EFFICIENCY
(%)
69
70
71
68
68
75
69
77
77
71
74
77
69
69
69
69
76
79
65
65
69
69
67
69
Note: Other input to output voltages may be available. Please contact Murata Power Solutions.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +44 (0)1908 615232
HPR4xxC_B01
HPR4XXC.B01Page
Page 11 of
of 4
HPR4XXC
0.75 Watt Miniature SIP DC/DC Converter
SPECIFICATIONS, ALL MODELS
Specifications are at TA = +25°C nominal input voltage unless otherwise specified.
PARAMETER
CONDITIONS
GENERAL
OUTPUT
INPUT
Voltage Range
MIN
TYP
MAX
UNITS
4.5
10.8
13.5
21.6
5
12
15
24
5.5
13.2
16.5
26.4
VDC
VDC
VDC
VDC
750
±5
200
40
7
15
18
.05
mW
%
mVp-p
mVrms
VDC
VDC
VDC
%/°C
OUTPUT
Rated Power
Voltage Setpoint Accuracy
Ripple & Noise
Rated Load, Nominal VIN
BW = DC to 10MHz
BW =10Hz to 2MHz
Voltage (Over Input Voltage Range) 1mA to Rated Current, VOUT = 5V
1mA to Rated Current, VOUT = 12V
1mA to Rated Current, VOUT = 15V
Temperature Coefficent
REGULATION
Load Regulation (All other modes)
Rated Load to 1mA Load
GENERAL
ISOLATION
Rated Voltage
Test Voltage
60 Hz, 60 Seconds
Resistance
Capacitance
Leakage Current
VISO= 240VAC, 60Hz
Switching Frequency
Frequency Change
Over Line and Load
Package Weight
MTTF per MIL-HDBK-217, Rev. F*
Circuit Stress Method
Ground Benign
TA = +25°C
Moisture Sensitivity Level (MSL)
IPC/JEDEC J-STD-20
TEMPERATURE
Specification
Operation
Storage
150
30
4.75
11.40
14.25
.01
3
%
1000
3000
10
25
2
170
24
100
7
3
7.9
VDC
Vpk
GΩ
pF
μArms
kHz
%
g
MHr
2
-25
-40
-40
+25
+85
+100
+110
°C
°C
°C
SOLDERING INFORMATION
The HPR4XXC devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected
to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this
time and temperature range, the integrity of the device’s plastic body will not be compromised and
internal temperatures within the converter will not exceed 175°C. Care should be taken to control
manual soldering limits identical to that of wave soldering.
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +44 (0)1908 615232
HPR4xxC_B01
HPR4XXC.B01Page
Page 22 of
of 4
HPR4XXC
0.75 Watt Miniature SIP DC/DC Converter
TYPICAL PERFORMANCE CURVES
Specifications are at TA = +25°C nominal input voltage and nominal load.
VOUT VS LOAD
(5Vout Models)
VOUT VS LOAD
(±5Vout Models)
5.7
5.4
5.5
5.2
VOUT VS LOAD
(12Vout Models)
12.5
5.3
12.3
Vout
Vout
Vout
12.4
5.0
12.2
12.1
5.1
4.8
4.9
4.6
12.0
0
80
40
120
160
11.9
0
Output Current (mA)
20
40
60
0
80
Output Current each load (mA)
VOUT VS LOAD
(±12Vout Models)
VOUT VS LOAD
(15Vout Models)
12.6
60
80
16.5
16.0
15.7
12.4
15.5
12.3
15.5
Vout
Vout
Vout
40
VOUT VS LOAD
(±15Vout Models)
15.9
12.5
15.0
12.2
15.3
14.5
12.1
15.1
14.0
12.0
14.9
0
10
20
30
13.5
0
40
20
40
60
80
Output Current each load (mA)
Output Current each load (mA)
EFFICIENCY VS LOAD
OSCILLATION FREQUENCY VS
TEMPERATURE
90
0
0.2
0.4
0.6
0.8
1.0
Output Power each load (Watts)
220
Frequency (KHz)
75
Efficiency (%)
20
Output Current each load (mA)
60
45
30
15
0
20
0
180
160
140
60
40
200
80
-30
100
0
% of Rated Load (%)
30
60
90
Temperature (°C)
SAFE OPERATING AREA
LOAD CAPACITANCE vs INPUT RISE TIME
(5 Vout models)
600
50
Total Load Capacitance (uF)
500
Total Load Capacitance (uF)
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
60
400
300
SAFE OPERATING AREA
200
40
30
SAFE OPERATING AREA
20
10
100
0
0
0
5
10
15
20
25
30
35
Rise Time of Input Voltage (mS)
40
45
0
50
5
10
15
20
25
30
35
40
45
50
Rise Time of Input Voltage (mS)
NOTES:
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
Total Load Capacitance (uF)
90
1.) When operated within the SAFE OPERATING AREA as defined
by the
above curves, the output voltage of HPR4XXC devices is
guaranteed
to be within 95% of its steady-state value within 100
milliseconds after the
input voltage has reached 95% of its steadystate value.
80
70
60
50
SAFE OPERATING AREA
40
30
2.) For dual output models, total load capacitance is the sum of the
capacitances on the plus and minus outputs.
20
10
0
0
5
10
15
20
25
30
35
40
45
50
Rise Time of Input Voltage (mS)
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +44 (0)1908 615232
HPR4xxC_B01
HPR4XXC.B01Page
Page 33 of
of 4
HPR4XXC
0.75 Watt Miniature SIP DC/DC Converter
MECHANICAL
0.240±0.010"
(6.09±0.25)
0.77±0.010"
(19.56±0.25)
FRONT
VIEW
0.397±0.010"
(10.16±0.25)
1 2
0.020±0.010"
(0.51±0.25)
5 6 7
0.02±0.002"
(0.51±0.05)
0.18±0.015"
(4.57±0.38)
RIGHT
SIDE
VIEW
0.010±0.002"
(0.25±0.05)
0.140"
MIN
(3.56)
0.035±0.015"
(0.89±0.38)
BOTTOM
VIEW
PIN CONNECTIONS
1.
+VIN
2.
-VIN
5.
-VOUT
6.
COM*
7.
+VOUT
*Common pin not present on
single output models.
:
ABSOLUTE MAXIMUM RATINGS
Notes:
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015”
MATERIAL: Lead material is phosphor
bronze; lead finish is 100-300 microinches
of matte tin over a barrier layer of 5-40 microinches of nickel.
ORDERING INFORMATION
HPR 4XX
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliant Version
Internal Power Dissipation ...................................450mW
ShortCircuitDuration ............................................Momentary
Lead Temperature (soldering, 10 seconds max ...+300°C*)
*NOTE: Refer to Reflow Profile for SMD Models.
USA:
C
Tucson (Az), Tel: (800) 547 2537, email: [email protected]
Canada: Toronto, Tel: (866) 740 1232, email: [email protected]
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
UK:
Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected]
France:
Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected]
Germany: München, Tel: +49 (0)89-544334-0, email: [email protected]
www.murata-ps.com email: [email protected] ISO 9001 REGISTERED
Japan:
Tokyo, Tel: 3-3779-1031, email: [email protected]
Osaka, Tel: 6-6354-2025, email: [email protected]
Website: www.murata-ps.jp
China:
Shanghai, Tel: +86 215 027 3678, email: [email protected]
Guangzhou, Tel: +86 208 221 8066, email: [email protected]
03/03/08
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2008 Murata Power Solutions, Inc.
www.murata-ps.com
Technical enquiries - email: [email protected], tel: +44 (0)1908 615232
HPR4xxC_B01
HPR4XXC.B01Page
Page 44 of
of 4
Similar pages