EPCOS B63399-B5 Pm/p/p cores halves/ep/tt/pr core Datasheet

PM/P/P Cores Halves/EP/TT/PR Cores
Series/Type:
P 30 x 19
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65702A50000000
B65701D0000R026
B65701D0000R048
Date of
Withdrawal
2004-10-18
2002-08-02
Deadline Last
Orders
2005-03-31
2002-12-31
Last Shipments
2005-09-30
2003-03-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
P 30 × 19
Core
B65701
20,9 _ 0,9
■ In accordance with IEC 60133
■ Pot cores are supplied in sets
with
without
center hole center hole
mm–1
mm
mm2
mm2
mm3
ø13,5 _ 0,4
Approx. weight (per set)
m
36
ø5,4+0,2
37
s
3,75±0,15
0,32
46
145
117
6 670
0,8+0,2
0,33
45
136
—
6 100
19 _ 0,4
13+0,4
Σl/A
le
Ae
A min
Ve
25+0,8
4,7+0,6
30,5 _ 1
Magnetic characteristics (per set)
M3
g
FPK0155-U
Gapped
Material
AL value
nH
N48
µe
s
approx.
mm
Ordering code 1)
-D with center hole
-T with threaded sleeve
250 ± 2 %
0,72
66
B65701-+250-G48
400 ± 2 %
0,40
105
B65701-+400-A48
630 ± 3 %
0,22
166
B65701-+630-A48
1000 ± 3 %
0,12
263
B65701-+1000-A48
2000 ± 5 %
0,05
525
B65701-D2000-J48
Ungapped
Material
AL value
µe
nH
AL1min PV
nH
N26
6200 + 30/– 20 % 1630
N87
6400 + 30/– 20 % 1630 3800
W/set
Ordering code
-D with center hole
-W without center hole
B65701-D-R26
< 2,5
B65701-W-R87
(200 mT, 100 kHz, 100 °C)
N30
11500 + 30/– 20 % 2930
B65701-W-R30
T38
28000 + 40/– 30 % 7130
B65701-W-Y38
1) Replace the + by the code letter ”D“ or ”T“ for the required version.
348 08/01
P 30 × 19
Accessories
B65702
Coil former
Standard:
Material:
Winding:
to IEC 60133
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
see “Processing Notes”, page 155
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E
120°C), 0,06 mm thick
Insulating washer 2 between core and terminal carrier
■ For increased dielectric strength
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120°C), 0,08 mm thick
Coil former
Ordering code
Sections
AN
mm2
lN
mm
A R value
µΩ
1
48
60
46
B65702-B-T1
2
45
60
49
B65702-B-T2
Insulating washer 1 (reel packing, PU = 1 reel)
B65702-A5000
Insulating washer 2 (bulk)
B65702-A5002
Coil former
ø15 _ 0,2
ø13,7+0,2
3+0,8
24,7 _ 0,2
AN
0,7
12,8 _ 0,2
FPK0340-T
23,8 _ 0,4
ø13,3±0,2
Insulating washer 2
ø25,4±0,2
3,8
Insulating washer 1
0,7
3,9+0,2
2±0,2
30,3 _ 0,5
FPK0157-B
FPK0158-J
349 08/01
P 30 × 19
Accessories
B65705
Mounting assembly for printed circuit boards
■ The set comprises a terminal carrier and a yoke
■ For snap-in connection
Terminal carrier
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 85:
F max. operating temperature 155 °C), color code gray
Solderability: to IEC 68-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 68-2-20, test Tb, method 1B: 350 °C, 3,5 s
Yoke
Spring yoke, made of tinned nickel silver (0,5 mm), with ground terminal
Complete mounting assembly (8 solder terminals)
Ordering code: B65705-B3
Grounding pin
This recess must be on the side of the
grounding pin to ensure that the yoke
locks into position.
Hole arrangement
View in mounting direction
Ground
1) The 2,8 mm hole is only necessary for additional fixing with M 2,5 screw.
a) Yoke
b) Terminal carrier with 8 solder terminals
350 08/01
P 30 × 19
B63399
Accessories
B65679
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core P 30 × 19
Material
N 48
Adjusting screw
Min.
adjusting
range
Ordering code
Tube core
∅ × length
mm
Material
250
4,55 × 6,3
N 22
red
16
B65679-E3-X22
400
630
4,98 × 6,3
N 22
black
18
11
B65679-E2-X22
630
1000
5,15 × 6,3
N 22
white
18
10
B65679-E1-X22
AL value
nH
Color
code
%
Adjusting screwdriver
B63399-B1
Handle
B63399-B5
Adjusting screw 1)
1) Due to the limited distance between adjusting screw and internal borehole, the entire assembly must be accurately
centered.
351 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages