Eutech EUP2624A 750khz/1.2mhz step-up dc/dc converter Datasheet

EUP2624A
750kHz/1.2MHz Step-up DC/DC Converter
DESCRIPTION
FEATURES
The EUP2624A is a high performance current mode, PWM
step-up converter with pin selectable operating frequency.
With an internal 1.9A, 200mΩ MOSFET, it can generate
12V at up to 500mA output current from a 5V supply. The
selectable 750kHz and 1.2MHz allows smaller inductors
and faster transient response. An external compensation pin
gives the user greater flexibility in setting loop
compensation allowing the use of low ESR Ceramic output
capacitors. Soft-start is controlled with an external
capacitor, which determines the input current ramp rate
during start-up.
z
z
z
z
z
z
z
z
z
When shut down, it draws<10µA of current and can
operate down to 2.5V input supply. These features along
with 1.2MHz switching frequency makes it an ideal device
for portable equipment.
APPLICATIONS
z
z
z
z
z
The EUP2624A is available in an 8-pin MSOP package.
The device is specified for operation over the full -40°C to
+85°C temperature range.
90% Efficiency
1.9A, 200mΩ Power MOSFET
2.5V to 5.5V Input Range
Adjustable Output Voltage up to 12V
750kHz/1.2MHz Switching Frequency Selection
Adjustable Soft-Start
Internal Thermal Protection
Small MSOP-8 package
RoHS Compliant and 100% Lead (Pb)-Free
DSL Modems
Set-Top Boxes
PCMCIA Cards
Portable Equipment
Handheld Devices
Typical Application Circuit
Figure 1. 5V to 12V Step-Up
DS2624A Ver1.0 July 2009
1
Similar pages