RTE Series Low Profile Rotary DIP Switches Features/Benefits • Thru-hole and surface mount models • Miniature size with robust H DIP stainless steel cover • Rotary SPDT, SP3T, SP4T functions • Rotary binary-decimal and hexadecimal coding • RoHS compliant Typical Applications • Timers, automation components • Computer and peripherals • Alarms, access control • Instrumentation Specifications Materials CONTACT RATING: Gold: 100 mA max. 10µ A min. 30 V DC max. 20 mVDC min. Silver: 100 mA max. 1 mA min. 50 V DC max. 2 VDC min. MECHANICAL LIFE: RTE02/03: 1,500 actuations; RTE04/10/16: 20,000 actuations COVER & BASE: Thermoplastic PPS ACTUATOR: LCP KNOB: Thermoplastic MOVABLE CONTACTS: Brass, gold or silver plated. STATIONARY CONTACTS: Brass, gold or silver plated. TERMINALS: See page I-25 to I-26 O-RING: Silicone CONTACT RESISTANCE: 100 mΩ max. initial; 150 mΩ after life INSULATION RESISTANCE: RTE02/03: 1013 Ω min. RTE04/10/16: 1010 Ω min. initial DIELECTRIC STRENGTH: RTE 02/03: 500 Vrms; RTE 10/16; 300 Vrms OPERATING TEMPERATURE: -25°C to 85°C. STORAGE TEMPERATURE: -40°C to 85°C. PACKAGING: N or R terminations in tube. V termination in box. G termination in reel, 750 pieces per reel. G termination with flush actuator, 1250 pieces per reel. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Solderability: Wave soldering 260º/2s. SMT are reflow compatible according to CECC 00802-NORM. How To Order Our easy Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. R T E Number of Positions RTE02 1 RTE03 1 RTE04 2 RTE10 3 2 RTE16 3 ESD Protection and top plate 0 Without ESD - standard plate 1 With ESD - standard plate 4 Actuator B Without ESD - black plate 0 Flush, screwdriver slot 1 Extended shaft 2, 5 2 Shaft for button 2, 5, 6 Contact/Terminal Material 4 Gold/Matte-tin 5 Silver/Matte-tin 13 Terminations N Thru-hole V Right angle 7 G Surface mount M Manual 8 R Reverse, thru-hole 1 - RTE02/RTE03 available with single pole function “0” only 2 - RTE04 version only available with screwdriver slot acuator "0" 3 - Single pole function not available for RTE10/RTE16 4 - ESD protection available with “N” thru-hole termination only 5 - Not available in surface mount 6 - Buttons ordered separately 7 - Not available for RTE02/RTE03 8 - Manual - available for RTE03 and RTE10/RTE16 with actuator option “2” only 9 - BCD complement code for RTE10, not available with terminations “G” & “M” 10 - Grey Code - for RTE10 only 11 - Hexidecimal code for RTE16 only 12 - Grey code for RTE04/RTE16 only 13 - Silver contact option only available for RTE02/RTE03 Switch Function 0 Single pole 3, 1 1 BCD code 2 BCD complement code 9 3 Grey Code 10 4 Hexadecimal code 11 7 Grey Code 12 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–21 www.ck-components.com RTE Series Low Profile Rotary DIP Switches SWITCHES WITH STANDARD OPTIONS PC Mount-Terminal Option N PART NUMBER WITHOUT ESD PIN RTE0200N04 RTE0300N04 RTE0400N04 RTE1000N14 RTE1600N44 WITH ESD PIN NO. POS. FUNCTION 2 SPDT 65 3 SP3T 65 RTE0210N04 RTE0310N04 RTE0410N04 RTE1010N14 RTE1610N44 QTY PER TUBE 4 SP4T 65 10 BCD 65 10 HEXADECIMAL 65 .315 (8,0) .291 (7,4) .167 (4,25) .144 (3,65) .291 (7,4) .283 (7,2) .020 (0,5) .041 (1,050) .368 (9,35) .10 (2,54) .10 (2,54) Right Angle Mount-Terminal Option V PART NUMBER FUNCTION QUANTITY 4 SP4T 150 per box 10 BCD 150 per box 16 HEXADECIMAL 150 per box .335 (8,5) 45˚0' .177 (4,5) .157 (4,0) RTE0400V04 RTE1000V14 RTE1600V44 NO. POS. .039 (1,0) .314 (7,975) .218 (5,53) .20 (5,08) .25 (6,34) .114 (2,9) .020 (0,5) .10 (2,54) .10 (2,54) .041 (1,050) QUANTITY PER REEL 02 SPDT 1250 03 SPDT 1250 04 SP4T 1250 10 BCD 1250 16 HEXADECIMAL 1250 .291 (7,4) .315 (8,0) .020 (0,50) FUNCTION .283 (7,2) .033 (0,85) .100 (2,54) .100 (2,54) .024 (0,6) .197 (5,0) .148 (3,75) RTE0200G04 RTE0300G04 RTE0400G04 RTE1000G14 RTE1600G44 NO. POS. .004 (0,10) PART NUMBER .144 (3,65) Surface Mount-Terminal Option G .167 (4,25) DIP H .197 (5,0) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–22 www.ck-components.com RTE Series Low Profile Rotary DIP Switches NUMBER OF POSITIONS RTE02* RTE03 2 POSITION RTE04 3 POSITION 4 POSITION 120˚0' 3 C 60˚0'C 2 1 3 C 1 C 60˚0' 2 H DIP C RTE10 RTE16 10 POSITION 1 2 4 16 POSITION C C 4 1 4 1 36˚0' 22˚30' 8 2 8 2 ESD PROTECTION 0 1 WITHOUT WITH .167 (4,25) .291 (7,4) .144 (3,65) .291 (7,4) 0.368 (9,35) .10 (2,54) 1 C 4 C 2 m .10 (2,54) 1 .30 (7,62) 4 .035 TYP. (ø0,9) .035 TYP. (ø0,9) 8 2 8 .10 (2,54) .10 (2,54) ACTUATOR 0 1 FLUSH, SCREWDRIVER SLOT 2 EXTENDED SHAFT SHAFT FOR BUTTON (not available in surface mount) .077 (1,95) .118 ø (3) .047 (1,2) .094 (2,4) .108 (2,75) .126 (3,2) .047 (1,2) .157 (ø4,0) .154 (3,9) 0.020 (0,5) .295 (7,5) .041 (1,05) .063 (1,6) .079 (2) Ø4 .157 (ø 4,0) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–23 www.ck-components.com 2 (7,62) 1 2 (7,62) 1 2 m (7,62) m 0.035 (0,9) 0.035 (0,9) Ø 3,5 Min. Ø (0.138 min) RTE Series Low Profile Rotary DIP Switches 1 Ø in PC Board for screw driver operation must be 3.5 mm 0.035 (0,9) ` TERMINATIONS N THRU-HOLE H .315 (8) .291 (7,4) 0.1 (2,54) .167 (4,25) 0.1 (2,54) 4 C .10 .10 (2,54) (2,54) RTE02 with ground terminal 4 0.1 (2,54) 0.1 (2,54) C C 2 1 C C 2 8 0.3 (7,62) 1 C 0.3 1 (7,62) m 2 1 m 3,5 Min. Ø Ø (0.138 min)0.035 (0,9) 0.035 (0,9) 0.035 (0,9) 2 2 Ø.035 m (ø0,9) Ø 3,5 Min. Ø (0.138 min) 2 0.3 (7,62) 8 0.035 (0,9) RTE02 without ground terminal RTE03 without ground terminal 0.2 (5,08) 0.1 0.1 C C (2,54) (2,54) 2 C C 0.4 0.4 (10,16) (10,16) 0.31 2 (7,62) 2 1 0.035 (0,9) 0.035 (0,9) .291 (7,4) ` 8 2 m .4 (10,16) Reverse version = R operation from bottom side 0.1 (2,54) C 1 m Ø 3,5 Min. Ø (0.138 min) .309 (7.85) 2 C 4 1 8 0.1 (2,54) 0.1 (2,54) 0.3 (7,62) 2 1 8 0.3 (7,62) m 0.035 (0,9) 0.035 (0,9) 0.035 (0,9) ø.035 RTE02 without (ø9,3) ground terminal 0.1 (2,54) 4 4 0.3 (7,62) .283 8 (7,2) C 8 C 2 1 .366 (9,3) 0.035 (0,9) 2 RTE02 with ground terminal C .020 (0,5) .167±.008 (4,25±0,2) .144 (3,65) 2 0.3 (7,62) 4 0.1 (2,54) 0.1 (2,54) 0.1 (2,54) 0.1 (2,54) RTE10, RTE 04 or RTE16 without ground terminal RTE10, RTE 04 or RTE16 with ground terminal 1 0.4C (10,16) .10 .10 (2,54)(2,54) 0.2 (5,08) ø.167 (ø4,25) C C 2 1 RTE03 without ground terminal RTE03 with ground terminal 0.1 (2,54) C 0.4 (10,16) 0.1 (2,54) 2 2 C 1 0.4 (10,16) 0.1 (2,54) C 2 0.1 (2,54) 2 C 0.4 (10,16) 1 m 0.035 (0,9) 0.035 (0,9) Ø in PC Board for screw driver operation must be 3.5 mm 0.035 (0,9) 0.035 (0,9) ` Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–24 RTE10, RTE 04 or RTE16 with ground terminal RTE10, RTE 04 or RTE16 without ground terminal C 1 0.4 (10,16) 0.035 (0,9) ` RTE10, RTE 04 or RTE16 without ground terminal 2 m .451±.008 (11,45±0,2) .041 (1,05) RTE10, RTE 04 or RTE16 with ground terminal .020 (0.5) 0.1 0.1 (2,54) (2,54) C 4 1 0.1 (2,54) 2 REVERSE, THRU-HOLE .185±.006 .126±.008 (3,2±0.2) (3,2±0.2) R 0.1 (2,54) C 0.035 (0,9) Ø in PC Board for screw driver operation must be 3.5 mm Ø in PC Board for screw driver operation must be 3.5 mm RTE03 with ground terminal RTE02 with ground terminal RTE03 with ground0.1 terminal 0.1 (2,54) (2,54) 0.1 0.1 C (2,54) C (2,54) 0.2 (5,08) .3 (7,62) 0.3 (7,62) 2 1 0.035 (0,9) RTE02 without ground terminal 1 C C m Reverse version = R operation from bottom side .368 (9,35) C Ø.041 (1,05) .10 .10 (2,54) (2,54) 0.3 (7,62) 8 0.1 (2,54) 0.1 (2,54) 4 1 2 .283 (7,2) RTE10, RTE 04 or RTE16 without ground terminal RTE10, RTE 04 or RTE16 with ground terminal .291 (7,4) .144 (3,65) DIP .283 (7,2) www.ck-components.com RTE Series Low Profile Rotary DIP Switches TERMINATIONS V G RIGHT ANGLE, THRU-HOLE SURFACE MOUNT H .148 (3,75) .144 (3,65) .177 (4,5) .100 (2,54) .197 (5,0) .197 (5,0) .004 (0,10) .024 (0,6) .033 (0,85) .100 (2,54) .393 (1) .218 (5,53) .314 (7,975) .288 (7,3) .157 (4) 45º0' .20 (5,08) .25 (6,34) .020 (0,5) .114 (2,9) (RTE02 only) .10 .10 (2,54) (2,54) .063 4x (1,6) .106 4x (2,7) .110 (2,8) .20 (5,08) ø0,9 (ø035) .110 (2,8) .100 (2,54) .100 (2,54) .10 .10 (2,54) (2,54) RTE03, 04, 10 and 16 .063 5x (1,6) .110 (2,8) .110 (2,8) .100 (2,54) .106 5x (2,7) .100 (2,54) PCB layout seen component side OPTION .315 (8,0) .28 (7,2) .291 (7,4) 0.1 0.1 (2,56) (2,56) .167 (4,25) .071 (1,8) .291 (7,4) .144 (3,65) .154 (3,9) 4 1 HOLES .035 (0,9) 2 .300 (7,62±0,2) C .3 (7,62) M 8 .041 (1,05) .358 (9,1) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–25 www.ck-components.com DIP .335 (8,5) RTE Series Low Profile Rotary DIP Switches SWITCH FUNCTION H SINGLE POLE 1 BCD COMPLEMENT CODE POS. 0 1 2 3 4 5 6 7 8 9 POS. 0 1 2 3 4 5 6 7 8 9 POS. 1 2 3 4 C 1 1 1 2 2 2 3 4 4 4 8 8 0 CRD10R C 2 3 C C&K DIP 2 BCD CODE 5 0 Other codes available by request. 4 GREY CODE ( for RTE10 only ) 7 HEXADECIMAL CODE GREY CODE ( for RTE04 and RTE16 only ) POS. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 POS. 0 1 2 3 4 5 6 7 8 9 POS. 1 2 3 4 1 1 2 2 2 4 4 4 8 8 8 0 CRD10R C 1 2 3 C C&K C 5 3 POS. 0 1 2 3 4 5 6 7 8 9 A B C D E F C 1 2 4 8 CONTACT MATERIAL OPTION CODE RoHS COMPLIANT * RoHS COMPATIBLE * CONTACT MATERIAL TERMINAL PLATING *4 YES YES * * GOLD MATTE TIN 100 mA max. 10µ A min. 30 V DC max. *5 YES YES * * SILVER MATTE TIN 100 mA max. 1 mA min. 50 V DC max. RATINGS * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. ** When selecting contact material option 4 and 5 with RTE02, RTE03 and or “V” terminations, these combinations are RoHS compliant but not currently compatible (i.e. they do not sustain the high temperatures of the leadfree soldering process). All other options and terminations are RoHS compatible. Please contact customer service for RoHS compatible versions of the RTE02 and RTE03. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–26 www.ck-components.com RTE Series Low Profile Rotary DIP Switches BUTTONS AVAILABLE .185 (4,7) Buttons are ordered separately, shipped in bulk. BTN RTE 40 BTN RTE 50 BTN RTE 90 Green H .06 (1,6) Color .118 (3,0) Black .118 (3,0) Red .059 (1,5) ø.283 (7,2) .11 (3) TAPE AND REEL .069 (1,75) Tape and reel for RTExx02Gxx 750 pieces per reel. .155 (4,0) .465 (12,1) E .409 (10,4) .945 (24,0) .453.004 (11,50,1) .012 (0,3) .465 (12,1) .079 (20,0) .078 (2,0) .155 (4,0) .303 (7,7) .307 (7,8) E .059 (1,6) FEED DIRECTION Tape and reel for RTExx00Gxx 1,250 pieces per reel. .157 (4,0) .472 (12,0) .472 (12,0) .079 (2,0) .079 (2,0) .069 (1,75) .012 (0,3 ) .157 (4,0) .629 (16,0) .295 (7,5) D .179 (4,5) D .303 (7,7) .059 (1,5) FEED DIRECTION Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–27 www.ck-components.com DIP Part Number .23 (6) .15 (4) .028 (0,7) 3˚