Kemet ERO610RK5120M Ceramic ac capacitor Datasheet

ERO610
• Ceramic AC Capacitors
• Class X1, 440V AC/Class Y2, 250VAC
TYPICAL APPLICATIONS
For worldwide use as electromagnetic
interference suppressor in all X1 and Y2
applications.
CONSTRUCTION
Disc capacitors with epoxy coating.
Epoxy dipped, insulating, flame retarding
according to UL 94V-0.
TECHNICAL DATA
Rated voltage UR
(IEC 60384-14.2)
X1
440 VAC, 50 Hz
Y2
250 VAC, 50 Hz
Capacitance range
1000-12000 pF
Capacitance tolerance
± 20%
Temperature range
(-40 to +125)°C
Climatic category
IEC 40/125/21
Approvals
VDE, UL, CSA
Dissipation factor tanδ
≤ 25 • 10 -3
Test voltage between
terminals
Component test:
5 mm: 2200 VAC, 50 Hz, 2 s
7.5 mm: 2500 VAC, 50 Hz, 2 s
As repeated test admissible only once with
2000 VAC, 50 Hz, 2 s
Random sampling test (destructive test):
1500 VAC, 50 Hz, 60 s
Dielectric strength of
body insulation
2000 VAC, 50 Hz,60 s (destructive test)
Insulation resistance
≥ 6 • 10 9 Ω
Taping and special lead
configurations
On request
p
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
ERO610
ARTICLE TABLE
Quantity per package
Capacitance
pF
D x s Max
(mm)
1000
1500
1800
2200
2500
3300
4700
5000
6800
8200
10000
12000
p±1*
(mm)
6.5 x 4.5
8.0 x 4.5
8.0 x 4.5
9.0 x 4.5
9.0 x 4.5
10.0 x 4.5
12.0 x 4.5
12.0 x 4.5
17.0 x 4.5
17.0 x 4.5
21.0 x 4.5
21.0 x 4.5
5
5
5
5
5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
d±0.05*
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
V±0.5*
(mm)
Article code
1 st block
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.6
1.6
1.6
1.6
Ceramic
dielectric
ERO610RJ4100M
ERO610RJ4150M
ERO610RJ4180M
ERO610RJ4220M
ERO610RJ4250M
ERO610RK4330M
ERO610RK4470M
ERO610RK4500M
ERO610RK4680M
ERO610RK4820M
ERO610RK5100M
ERO610RK5120M
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
* Standard lead configuration, other lead spacing and diameter available on request.
APPROVALS/REFERENCE DOCUMENTS
Certification Body
Specification
Approval reference
VDE
UL
EN 132400
UL 1414 (UR = 250 VAC)
40001990
E73869
CSA
(cUL recognition)
C 22.2 No. 1-M90 (UR=250 VAC)
216038
MARKING
3.3 nF to 12 nF
1 nF to 2.5 nF
ERO 4n7 M
IEC 384-14/2
440 250 250~
X1 Y2 c � us
440~X1
ERO 2n2 M
250~Y2
All approval marks are also shown on the
label.
ORDERING INFORMATION
Article code
1st block
See article table
Pos. 13 Capacitance tolerance code:
M = ± 20% standard
2nd block
See separate brochure:
Ceramic Disc, EMI and Safety Capacitors,
General information
Page 5
See article table and page 19 in the KEMET Film Capacitors 2003 catalogue. For
options, see Ceramic Disc, EMI and Safety Capacitors, General information, Page 5.
PACKING
The box dimensions for bulk packaging
are 245 x 145 x 80 mm. Quantity/package
as per article table.
Reels with taped capacitors are packed
10 in a box with dimension 370 x 370 x
560 mm. Quantity/reel according to article
table. The standard quantity/reel is for
360 mm reel. If 500 mm reel is required,
it must be specified when ordering and
the quantity is 2 x the given quantity.
DATA SHEET ERO610
Specifications subject to change
without notice
© KEMET 2011
2
Similar pages