GE GP10V Glass passivated junction rectifier Datasheet

GP10A THRU GP10Y
GLASS PASSIVATED JUNCTION RECTIFIER
FEATURES
♦ Plastic package has
Underwriters
Laboratory Flammability
Classification 94V-0
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 1.0 Ampere operation at TA=75°C and 55°C
with no thermal runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
T
N
1.0 (25.4)
MIN.
E
P
A
T
Forward Current - 1.0 Ampere
DO-204AL
E
D
*
Reverse Voltage - 50 to 1600 Volts
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
NOTE: Lead diameter is 0.026 (0.66)
0.023 (0.58)
for suffix "E" part numbers
MECHANICAL DATA
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation is covered by
Case: JEDEC DO-204AL molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
A
B
D
Maximum repetitive peak reverse voltage
VRRM
Maximum average forward rectified current
0.375" (9.5mm) lead length (SEE FIG. 1)
I(AV)
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
30.0
VF
1.1
Maximum instantaneous forward voltage at 1.0A
Maximum full load reverse current, full cycle
average, 0.375" (9.5mm) lead lengths at TA=75°C
G
J
K
M
N
Q
T
V
W
Y
UNITS
50 to 1600 Volts (SEE FIG. 5)
Volts
1.0
Amp
25.0
1.2
Amps
1.3
Volts
IR(AV)
30.0
µA
IR
5.0
50.0
µA
Typical reverse recovery time (NOTE 1)
trr
2.0
µs
Typical junction capacitance (NOTE 2)
CJ
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
RΘJA
TJ, TSTG
NOTES:
(1) Reverse recovery test condition: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted
4/98
8.0
7.0
5.0
55.0
-65 to +175
pF
°C/W
-65 to +150
°C
RATINGS AND CHARACTERISTIC CURVES GP10A THRU GP10Y
30
FIG. 1 - FORWARD CURRENT DERATING CURVE
1.0
GP10A - GP10M
0.8
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
GP10N - GP10Y
0.6
0.4
0.2
0.375" (9.5mm) LEAD LENGTH
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE, °C
180
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
25
GP10A - GP10M
20
15
GP10N - GP10Y
10
5.0
1
10
100
NUMBER OF CYCLES AT 60 HZ
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS
10
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
10
1
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
0.1
GP10A to GP10J
GP10K to GP10Q
GP10T to GP10Y
0.01
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
TJ=125°C
1
TJ=75°C
0.1
TJ=25°C
0.01
0.001
0
20
40
60
80
100
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 6 - TYPICAL JUNCTION CAPACITANCE
FIG. 5 - MAXIMUM REPETITIVE PEAK
REVERSE VOLTAGE, VRRM
GP10A
GP10B
GP10D
GP10G
GP10J
GP10K
GP10M
GP10N
GP10Q
GP10T
GP10V
GP10W
GP10Y
. . . . . . .50V
. . . . . .100V
. . . . . .200V
. . . . . .400V
. . . . . .600V
. . . . . .800V
. . . . .1000V
. . . . .1100V
. . . . .1200V
. . . . .1300V
. . . . .1400V
. . . .1500V
. . . . .1600V
20
JUNCTION CAPACITANCE pF
INSTANTANEOUS FORWARD CURRENT, AMPERES
20
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
10
GP10A to GP10J
GP10K to GP10Q
GP10T to GP10Y
1.0
0.1
1
10
REVERSE VOLTAGE, VOLTS
100
Similar pages