MBR10150CT CT / MBRF10150CT MBRF Green Product Summary 10A 0A SCHOTTKY BARRIER RECTIFIER Features and Benefits MBR10150CT / MBRF10150CT (Per Leg) VRRM (V) IO (A) VF (MAX) (V) @ +25°C 150 5 0.89 IR (MAX) (mA) @ +25°C 0.05 • • • • • • Guard Ring Die Construction for Transient Protection. High Surge Current Capability. Low Forward Voltage Drop. Lead-Free Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Q101 Standards for High Reliability Description and Applications Mechanical Data This Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications. It is ideally suited for use as a: • Polarity Protection Diode • Re-Circulating Diode • Switching Diode • • • • • • TO-220AB Top View TO-220AB Bottom View Case: TO-220AB, ITO-220AB Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 94V Moisture Sensitivity: Level 1 per J-STD-020 J Terminals: Finish - Matte Tin Annealed A over Copper Leadframe. Solderable per MIL-STD-202, 202, Method 208 Polarity: See Below ( Weight: TO-220AB – 1.95 grams (Approximate) ITO-220AB – 1.69 grams (Approximate) ( ITO-220AB Top View ITO-220AB Bottom View Package Pin Out Configuration Ordering Information (Note 4) Part Number MBR10150CT-LJ MBRF10150CT-LJ Notes: Case TO-220AB (Type C) ITO-220AB (TO220F-3) Packaging 50 pieces/tube 50 pieces/tube 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of HalogenHal and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information MBR10150CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last Two Digits of Year ear (ex: 15 = 2015) WW = Week (01 - 53) MBR10150CT / MBRF10150CT Document number: DS35379 Rev. 7 - 2 1 of 4 www.diodes.com MBRF10150CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last Two Digits igits of Year (ex: 15 = 2015) WW = Week (01 - 53) April 2015 © Diodes Incorporated MBR10150CT / MBRF10150CT Maximum Ratings (Per Leg) (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol Value Unit VRRM VRWM VRM 150 V IO 5 10 A IFSM 100 A Symbol Value Unit RθJC 4 7 °C/W RθJA 15 25 °C/W TJ, TSTG -55 to +175 °C Thermal Characteristics (Per Leg) Characteristic Typical Thermal Resistance, Junction to Case (Note 5) Package = TO-220AB Package = ITO-220AB Typical Thermal Resistance, Junction to Ambient (Note 5) Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range Electrical Characteristics (Per Leg) (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Forward Voltage Drop VF Leakage Current (Note 6) IR Notes: Min — — Typ 0.83 — Max 0.89 0.81 — — — — 0.05 10 Unit V mA Test Condition IF = 5A, TJ = +25°C IF = 5A, TJ = +125°C VR = 150V, TJ = +25°C VR = 150V, TJ = +125°C 5. Device mounted on heat sink (45mm x 20mm x12mm), with minimum recommended pad layout per http://www.diodes.com. 6. Short duration pulse test used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (A) 10.0 PD, POWER DISSIPATION (W) TJ = 175°C 8.0 6.0 4.0 2.0 0.0 0 5 10 15 IF(AV) AVERAGE FORWARD CURRENT (A) Figure 1 Forward Power Dissipation MBR10150CT / MBRF10150CT Document number: DS35379 Rev. 7 - 2 2 of 4 www.diodes.com 100 10 T A = 175°C 1 0.1 T A = 150°C TA = 125°C T A = 85°C 0.01 TA = 25°C 0.001 TA = -55°C 0.0001 0 0.2 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics April 2015 © Diodes Incorporated 6.0 10 IF(AV), AVERAGE FORWARD CURRENT (A) IR , INSTANTANEOUS LEAKAGE CURRENT (mA) MBR10150CT / MBRF10150CT TA = 175°C 1 TA = 150°C TA = 125°C 0.1 TA = 85°C 0.01 0.001 TA = 25°C 0.0001 5.0 4.0 3.0 2.0 1.0 0.0 0 0.00001 0 50 100 150 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3 Typical Reverse Characteristics 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Figure 4 Forward Current Derating Curve 175 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. D 1.70 0.60 A3 1.30 Dim A A2 A3 b b1 c D E e H1 L H1 ø Y 3° E A 3° 3° b1 A2 L L1 b c D X 9.600 10.600 - Y - - 11.100 Y1 E A ø b2 b1 A2 L1 b e MBR10150CT / MBRF10150CT Document number: DS35379 Rev. 7 - 2 3.560 3.640 All Dimensions in mm A3 Y L Typ 4.500 2.400 1.300 1.270 2.54 - L1 Ø e e TO220AB (Type C) Min Max 4.40 4.60 2.20 2.50 1.20 1.40 0.700 0.900 1.170 1.390 0.400 0.600 9.800 10.200 9.000 9.400 6.300 6.700 12.600 13.600 e ITO220AB(TO220F-3) Dim Min Max Typ A 4.30 4.90 A2 2.52 2.92 A3 2.35 2.90 b 0.55 0.90 b1 1.00 1.40 b2 1.10 1.50 c 0.45 0.60 D 9.70 10.30 E 14.70 16.00 e 2.54 L 12.50 13.50 L1 2.79 4.50 X 6.90 7.10 Y 3.00 3.40 Y1 3.37 3.90 ø 3.00 3.55 All Dimensions in mm c 3 of 4 www.diodes.com April 2015 © Diodes Incorporated MBR10150CT / MBRF10150CT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com MBR10150CT / MBRF10150CT Document number: DS35379 Rev. 7 - 2 4 of 4 www.diodes.com April 2015 © Diodes Incorporated