Dynex DSF8025SE20 Fast recovery diode Datasheet

DSF8025SE / DSF8025SG
DSF8025SE / DSF8025SG
Fast Recovery Diode
Advance Information
DS6153-1 July 2014 (LN31793)
APPLICATIONS
■
Induction Heating
■
A.C. Motor Drives
■
Inverters And Choppers
■
Welding
■
High Frequency Rectification
■
UPS
KEY PARAMETERS
VRRM
2500V
IF(AV)
650A
IFSM
7500A
Qr
540µC
trr
5.0µs
FEATURES
■
Double side cooling
■
High surge capability
■
Low recovery charge
VOLTAGE RATINGS
Type Number
DSF8025SE25
DSF8025SG25
DSF8025SE24
DSF8025SG24
DSF8025SE23
DSF8025SG23
DSF8025SE22
DSF8025SG22
DSF8025SE21
DSF8025SG21
DSF8025SE20
DSF8025SG20
Repetitive Peak
Reverse Voltage
VRRM
V
2500
Conditions
VRSM = VRRM + 100V
Package outline type code: E
Package outline type code: G
2400
(See package details for further information)
2300
Fig. 1 Package outlines
2200
2100
2000
Lower voltage grades available.
ORDERING INFORMATION
When ordering, select the required part number shown in the
Voltage Ratings selection table, e.g.:
DSF8025SE23 for 2300V product in an 'E' outline,
DSF8025SG23 for 2300V product in an 'G' outline,
Note: Please use the complete part number when ordering and
quote this number in any future correspondance relating to your
order.
1/8
www.dynexsemi.com
DSF8025SE / DSF8025SG
CURRENT RATINGS
Symbol
Parameter
Conditions
Max.
Units
650
A
Double Side Cooled
IF(AV)
Mean forward current
Half wave resistive load, Tcase = 65oC
IF(RMS)
RMS value
Tcase = 65oC
1020
A
Continuous (direct) forward current
Tcase = 65oC
785
A
IF
Single Side Cooled (Anode side)
IF(AV)
Mean forward current
Half wave resistive load, Tcase = 65oC
385
A
IF(RMS)
RMS value
Tcase = 65oC
604
A
Continuous (direct) forward current
Tcase = 65oC
465
A
IF
SURGE RATINGS
Symbol
IFSM
I2t
IFSM
I2t
Parameter
Conditions
Surge (non-repetitive) forward current
Max.
Units
7.5
kA
281 x 103
A2s
6.0
kA
180 x 103
A2s
10ms half sine; with 0% VRRM, Tj = 150oC
I2t for fusing
Surge (non-repetitive) forward current
10ms half sine; with 50% VRRM, Tj = 150oC
I2t for fusing
THERMAL AND MECHANICAL DATA
Parameter
Symbol
Conditions
Double side cooled
Rth(j-c)
Thermal resistance - junction to case
Min.
Max.
Units
dc
-
0.047
o
Anode dc
-
0.094
o
Cathode dc
-
0.094
o
Double side
-
0.018
o
Single side
-
0.036
o
-
150
o
o
C/W
C/W
Single side cooled
Rth(c-h)
Thermal resistance - case to heatsink
Clamping force 8.0kN
with mounting compound
Tvj
Virtual junction temperature
Tstg
Storage temperature range
-55
175
Clamping force
7.0
9.0
-
Forward (conducting)
C/W
C/W
C/W
C
C
kN
2/8
www.dynexsemi.com
DSF8025SE / DSF8025SG
CHARACTERISTICS
Symbol
Conditions
Parameter
Typ.
Max.
Units
VFM
Forward voltage
At 1000A peak, Tcase = 25oC
-
2.3
V
IRM
Peak reverse current
At VRRM, Tcase = 150oC
-
50
mA
trr
Reverse recovery time
-
5.0
µs
Recovered charge (50% chord)
IF = 1000A, diRR/dt = 100A/µs
-
540
µC
IRR
Reverse recovery current
Tcase = 150oC, VR = 100V
-
235
A
K
Soft factor
1.8
-
-
QRA1
VTO
Threshold voltage
At Tvj = 150oC
-
1.48
V
rT
Slope resistance
At Tvj = 150oC
-
0.8
mΩ
Peak forward recovery voltage
di/dt = 1000A/µs, Tj = 125oC
70
-
V
VFRP
DEFINITION OF K FACTOR AND QRA1
QRA1 = 0.5x IRR(t1 + t2)
dIR/dt
t1
t2
k = t1/t2
τ
0.5x IRR
IRR
3/8
www.dynexsemi.com
DSF8025SE / DSF8025SG
CURVES
3500
500
Measured under pulse conditions
Measured under pulse conditions
Tj = 25˚C
Tj = 150˚C
Tj = 25˚C
Tj = 150˚C
3000
Instantaneous forward current IF - (A)
Instantaneous forward current IF - (A)
400
2500
300
2000
200
1500
100
1000
500
0
1.0
2.0
3.0
Instantaneous forward voltage VF - (V)
0
1.00
4.0
Fig.2 Maximum (limit) forward characteristics
1.25
1.50
1.75
Instantaneous forward voltage VF - (V)
Fig.3 Maximum (limit) forward characteristics
250
10000
IFM
Current
waveform
QRA1
VFRP
tp = 1ms
dIR/dt
Reverse recovered charge, Qr - (µC)
Transient forward votage, VFR - (V)
δy
di = δy
dt δx
δx
0.5x IRR
IRR
1000
Tj = 125˚C limit
100
Tj = 25˚C limit
IF = 2000A
IF = 1000A
50
0
0
Conditions:
Tj = 150˚C,
VR = 100V
Voltage
waveform
200
150
2.00
IF = 200A
500
1000
1500
Rate of rise of forward current, dIF/dt - (A/µs)
Fig.5 Transient forward voltage vs rate of rise of
forward current
2000
100
10
100
Rate of rise of reverse current dIR/dt - (A/µs)
1000
Fig.6 Recovered charge
4/8
www.dynexsemi.com
DSF8025SE / DSF8025SG
1000
0.1
Conditions:
Tj = 150˚C,
VR = 100V
Anode side
cooled
Transient thermal impedance, Zth(j-c) - (˚C/W)
A
B
Reverse recovery current, IRR - (A)
C
Double side
cooled
0.01
100
A: IF = 2000A
B: IF = 1000A
C: IF = 200A
10
1
10
Rate of rise of reverse current dIR/dt - (A/µs)
100
Fig.7 Typical reverse recovery current vs rate of fall of
forward current
0.001
0.001
0.01
0.1
Time - (s)
1.0
10
Fig.8 Maximum (limit) transient thermal impedance junction to case - (˚C/W)
5/8
www.dynexsemi.com
DSF8025SE / DSF8025SG
PACKAGE DETAILS
For further package information, please visit our website or contact Customer Services. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
2 holes Ø3.6 ± 0.1 x 2.0 ± 0.1 deep
(One in each electrode)
Cathode
Ø42max
Ø25nom.
15
14
Ø25nom.
Anode
Nominal weight: 82g
Clamping force: 8kN ±10%
Package maybe supplied with pins and/or tags.
Package outline type code: E
Fig. 9 Package details - E
6/8
www.dynexsemi.com
DSF8025SE / DSF8025SG
PACKAGE DETAILS
For further package information, please visit our website or contact Customer Services. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
Hole Ø3.6 x 2.0 deep (in both electrodes)
Cathode
Ø58.5 max
27.0
25.4
Ø34 nom
Ø34 nom
Anode
Nominal weight: 250g
Clamping force: 12kN ±10%
Package outine type code: G
Fig. 10 Package details - G
7/8
www.dynexsemi.com
IMPORTANT INFORMATION:
This publication is provided for information only and not for resale.
The products and information in this publication are intended for use by appropriately trained technical personnel.
Due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute
any guarantee of suitability for use in a specific application.The user must evaluate the suitability of the product and the completeness of
the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requirements
are met. Should additional product information be needed please contact Customer Service.
Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical
errors. The information is provided without any warranty or guarantee of any kind.
This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the
most up to date version and has not been superseded.
The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property.
The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or
malfunction.
The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use
protective safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnected any
electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves.
Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the
product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may include
potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. Appropriate application design
and safety precautions should always be followed to protect persons and property.
Product Status & Product Ordering:
We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for
production. The annotations are as follows:Target Information:
Preliminary Information:
No Annotation:
This is the most tentative form of information and represents a very preliminary specification.
No actual design work on the product has been started.
The product design is complete and final characterisation for volume production is in
progress.The datasheet represents the product as it is now understood but details may change.
The product has been approved for production and unless otherwise notified by Dynex any
product ordered will be supplied to the current version of the data sheet prevailing at the
time of our order acknowledgement.
All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request.
Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their
respective owners.
HEADQUARTERS OPERATIONS
CUSTOMER SERVICE
DYNEX SEMICONDUCTOR LIMITED
Doddington Road, Lincoln, Lincolnshire, LN6 3LF
United Kingdom.
Phone: +44 (0) 1522 500500
Fax:
+44 (0) 1522 500550
Web: http://www.dynexsemi.com
Phone: +44 (0) 1522 502753 / 502901
Fax:
+44 (0) 1522 500020
e-mail: [email protected]
 Dynex Semiconductor Ltd.
Technical Documentation – Not for resale.
Similar pages