Kingbright AA5060SYC/J 5.0x6.0mm surface mount led lamp Datasheet

5.0X6.0mm SURFACE MOUNT LED LAMP
PRELIMINARY SPEC
Part Number: AA5060SYC/J
Features
Description
z SINGLE
SUPER BRIGHT YELLOW
COLOR.
z SUITABLE
The Super Bright device is based on light emitting diode chip
FOR ALL SMT ASSEMBLY AND SOLDER
made from AlInGaP.
PROCESS.
z AVAILABLE
z IDEAL
z PACKAGE
: 500PCS / REEL.
z MOISTURE
z RoHS
ON TAPE AND REEL.
FOR BACKLIGHTING.
SENSITIVITY LEVEL : LEVEL 4.
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG3567
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/20/2007
DRAWN: D.M.LIU
PAGE: 1 OF 5
ERP:1201003065
Selection Guide
Dice
Part No.
AA5060SYC/J
Iv (mcd) [2]
@ 50mA
Lens Type
SUPER BRIGHT YELLOW (AlInGaP)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
650
1300
100°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Super Bright Yellow
589
nm
IF=20mA
Spectral Line Half-width
Super Bright Yellow
20
nm
IF=20mA
C
Capacitance
Super Bright Yellow
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Yellow
2.3
2.8
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
Power dissipation
140
mW
DC Forward Current
50
mA
Peak Forward Current [1]
140
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG3567
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/20/2007
DRAWN: D.M.LIU
PAGE: 2 OF 5
ERP:1201003065
Super Bright Yellow
SPEC NO: DSAG3567
APPROVED: WYNEC
AA5060SYC/J
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/20/2007
DRAWN: D.M.LIU
PAGE: 3 OF 5
ERP:1201003065
AA5060SYC/J
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG3567
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/20/2007
DRAWN: D.M.LIU
PAGE: 4 OF 5
ERP:1201003065
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAG3567
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
AA5060SYC/J
DATE: JUN/20/2007
DRAWN: D.M.LIU
PAGE: 5 OF 5
ERP:1201003065
Similar pages