MAPDCC0001
Low Cost Two-Way SMT Power Divider
824-960 MHz
Features
Rev. V4
Functional Block Diagram
Small Size and Low Profile
Excellent Amplitude and Phase Balance
Superior Repeatability
Typical Insertion Loss 0.5 dB
Typical Isolation 23 dB
1 Watt Power Handling
Lead-Free SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DS52-0001
Description
M/A-COM’s MAPDCC0001 is an IC-based
monolithic power divider in a low cost SOIC-8
plastic package. This 2-way power divider is ideally
suited for applications where small size, low
insertion loss, superior phase/amplitude tracking
and low cost are required. Typical applications
include base station switching networks and other
communication applications where size and PCB
real estate are a premium. Available in tape and
reel.
The MAPDCC0001 is fabricated using a passiveintegrated circuit process. The process features full
-chip passivation for increased performance and
reliability.
Pin Configuration
Ordering Information
Function
1
GND
2
RF-IN
Part Number
Package
3
GND
MAPDCC0001
Bulk Packaging
4
GND
MAPDCC0001TR
1000 piece reel
5
RF-1 (out)
MAPDCC0001-TB
Sample Test Board
6
GND
7
GND
8
RF-2 (out)
Note: Reference Application Note M513 for reel size
information.
1
Pin No.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0001
Low Cost Two-Way SMT Power Divider
824-960 MHz
Rev. V4
Electrical Specifications1: TA = +25°C
Parameter
Insertion Loss
Above 3.0dB
Isolation
VSWR
Input
Output
Amplitude Balance
Phase Balance
Units
Min
Typ
Max
dB
—
0.5
0.6
dB
15
23
—
—
—
—
—
1.35:1
1.25:1
1.5:1
1.4:1
dB
—
0.05
0.15
Deg.
—
0.5
1.5
1. All specifications apply with a 50-Ohm source and load impedance.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Input Power4
1 W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2.
3.
4.
Recommended PCB Configuration
Exceeding any one or combination of these limits may
cause permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With Internal load dissipation of 0.125 W maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0001
Low Cost Two-Way SMT Power Divider
824-960 MHz
Rev. V4
Typical Performance @ +25ºC
Insertion Loss vs. Frequency
Isolation vs. Frequency
0.7
25
Isolation (dB)
Insertion Loss (dB)
0.6
0.5
0.4
0.3
0.2
0.1
20
15
10
5
0
0.0
824
824
858
892
926
960
926
960
Phase Balance vs. Frequency Relative to RF1
0.20
1.5
Input
Phase Balance (Deg)
Output
1.4
VSWR
892
Fre que ncy (MHz )
Frequency (MHz)
VSWR vs. Frequency
858
1.3
1.2
1.1
1.0
824
858
892
Fre que ncy (MHz )
926
960
0.15
0.10
0.05
0.00
824
858
892
926
Fre que ncy (MHz )
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
960
MAPDCC0001
Low Cost Two-Way SMT Power Divider
824-960 MHz
Rev. V4
Lead-Free, SOIC-8†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0001
Low Cost Two-Way SMT Power Divider
824-960 MHz
Rev. V4
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support