BOOKHAM EML10W5575CA-J57 10gb/s dwdm ea modulator and dfb laser with gpo rf connector Datasheet

Data Sheet
10Gb/s DWDM EA Modulator and DFB Laser
with GPO RF Connector
EML10WCA
The Bookham EML10 Laser has an electro-absorption
modulator monolithically integrated with a conventional
Distributed Feedback Multi Quantum Well (MQW) laser.
This allows the modulation voltage to be applied to the
modulator section whilst the laser section operates CW
allowing extremely low wavelength chirping. Specifically
designed for use in STM-64/OC-192 DWDM 100GHz
applications over 40km, with low dispersion penalty at
9.953Gb/s, (<2dB). A high extinction ratio of >10.5dB.
This device is available in a hermetic 7-pin ceramic butterfly
package with SMP/GPO connector for modulation input.
The EML10 includes an optical isolator, monitor photodiode,
thermistor and thermo-electric cooler.
Features:
• High output power
• Low modulation voltage
• Long haul performance with negligible
dispersion penalty
• Single 50Ω low voltage drive modulation input
• Integral thermo-electric cooler with precision NTC
temperature control
• Hermetically sealed 7-pin butterfly package with
optical isolator
• High stability laser chip
• No wavelength locker required
• High extinction ratio >10.5dB
• RoHS compliant
Applications:
• Suitable for use:
• In DWDM FEC applications (~ 10.709Gb/s)
• In DWDM applications (~ 9.95Gb/s)
• ITU-T standard 100GHz grid
• C brand (1529.55nm to 1560.61nm)
• With MetroCor™ and standard SMF-28™ fiber
40km applications
MetroCor™ and SMF-28™ are registered trademarks of
Corning Incorporated
1
Data Sheet
Characteristics
Tcase = 25°C, Tlaser = 25°C unless otherwise stated
Parameter
Conditions
Min
Typ
Max
Unit
5
20
35
mA
0.001
1
uW
80
90
mA
100
mA
2
V
1529.55
1560.61
nm
-100
100
pm
Wavelength stability with
case temperatures
-0.5
+0.5
pm/°C
Side mode suppression
ratio (SMSR) @ Iop
36
45
0.2
0.27
0.3
nm
Modulator drive voltage
2
2.5
2.8
Vpp
Bias voltage for ‘on’ level
-0.7
-0.25
0
V
-3
-2
-1
dBm
0.5
dB
CW Laser
Threshold current
Threshold power
50
Operating current SOL
@Iop
Operating current EOL
@Iop
Laser forward voltage
If=80mA @ 25°C, CW
Peak wavelength
Wavelength drift vs life time
Spectral width @ Iop
15 years typical life
-20dBr, Notes
[2] [1]
1.0
1.2
dB
Optical Modulator
2
Fiber output power
Note
Case temperature
tracking error
Tcase = -20 to +70 °C
@ cont Im
-0.5
+/-0.1
S21 Optical bandwidth
VEA @-1V
9
12.5
S11 return loss
(0 GHz to 7 GHz)
VEA @-1V
-15
-8
S11 return loss
(7 GHz to 10 GHz)
VEA @-1V
-10
-5
Optical rise/fall time
20 to 80%, Notes
20
36
40
Dynamic optical
extinction ratio
Notes
[1] [3]
10.5
11
dB
OC192/SDH64 mask margin
Notes
[1] [3]
10
18
%
Dispersion penalty
(RX power penalty)
Notes
[1] [4]
[1]
[1] [3]
1
GHz
2
dB
ps
dB
Data Sheet
Characteristics (continued)
Parameter
Conditions
Min
Typ
Max
Unit
1.0
5
10
V
0.2
0.5
1.5
mA
0.001
0.1
uA
15
pF
10.5
kW
Photodiode Monitor
Monitor diode bias voltage
Monitor diode current
Note[1],@Iop
Dark current
Capacitance
Thermo Electric
Cooler System
Thermistor resistance
@ Tsub=25degC
9.5
10
Thermistor Steinhart-Hart
coefficient C1
1.03E-03
Thermistor Steinhart-Hart
coefficient C2
2.39E-04
Thermistor Steinhart-Hart
coefficient C3
1.56E-07
Thermistor B constant
0/50k
3539
3575
3611
Thermistor current
1
10
100
uA
Laser submount temperature
20
25
35
°C
TEC current (EOL)
1.3
A
TEC voltage (EOL)
2.5
V
TEC power dissipation
3.3
W
Other
Optical isolation
Tcase = -20 to +70 °C
Fiber Length
25
30
0.8
Notes:
[1] Applied modulation is 9.953Gb/s, 2^23-1 PRBS NRZ data sequence.
[2] Linewidth is measured using 0.06nm resolution bandwidth.
[3] Optical eye parameters measured with a Communications Analyser with Agilent plug-in module 86106B option
410 (or equivalent). Optical 0/1 crossing typically 50%.
[4] Fiber characteristics are derived from the following equation;
S0
λ04
D(λ) = — (λ - —3 ) ps/(nm2.km)
λ
4
Where So = 0.092 ps/(nm2.km) and l0 = 1302nm. Receiver sensitivity measured at a BER of 1e-10.
RX OSNR > 35dB, optimised RX CDR phase adjust and 50% CDR slice level.
3
dB
1.2
m
Data Sheet
Absolute Maximum Ratings
Tcase = 25°C unless otherwise stated
The table below provides maximum and/or minimum values of critical parameters which will not permanently damage
the device, but for which the operating specification may not hold.
Parameter
Conditions
Min
Typ
Max
Unit
Operating temperature
-20
70
°C
Storage temperature
-40
85
°C
10
s
Lead soldering time
T=260°C
Fiber bend radius
20
Axial force on fiber
mm
5
N
150
mA
Laser reverse voltage
2
V
Modulator forward voltage
1
V
1
V
Monitor diode reverse voltage
20
V
Photodiode forward current
1
mA
TEC voltage
2.5
V
TEC current
1.4
A
Laser forward current
CW @ 30C
Modulator reverse voltage
ESD
-5
Note
[5]
500
Note:
[5] In accordance with Telcordia TR-NWT-000870, ESD class 3, human body model.
Optical Systems Performance
4
Optical Eye Diagram
Dispersion Penalty Plots
Test conditions: 9.953Gb/s 2^23-1 PRBS NRZ data.
Test conditions: 9.953Gb/s 2^23-1 PRBS NRZ data.
V
Data Sheet
Applications Support
The following documents are available to support customers using this product:
Document Title
Performance Comparison of commercially available
RF drivers for the Bookham EML11.
Document Referrence
AN0140
Optical component evaluation platforms are available for all Bookham optical components.
Contact your regional sales representative for further information.
Outline Drawing
5
Data Sheet
Connections
Pin #
Pin #
1
Thermistor
5
BFM Cathode
2
Thermistor
6
Cooler (+)
3
Laser bias (+) Anode
7
Cooler (-)
4
BFM Anode
Note:
Laser cathode is case ground. SMP/GPO center is EA modulation(-).
Pin 1 is nearest the fiber tail.
Deliverable Data
The following data file is provided using an Electronic Data Exchange (EDE) process, a paper copy will also be
provided with each module.
(Tlaser = 25ºC, Tcase = 25ºC unless otherwise specified)
Parameter
Symbol
On Level Modulation
Format
Unit
VO
Value
V
Modulator Drive Voltage (pk-pk)
VMOD
Value
V
CW Laser Threshold Current
ITH
CW, VMOD=VO
Value
mA
CW Laser Operating Current
IOP
CW
Value
mA
Monitor Photocurrent
IM
Note
[6]
Value
mA
Peak Wavelength
LPK
Note
[6]
Value
nm
Mean Modulated Output Power
PO
Note
[6]
Value
dBm
Value
Ω
Thermistor Resistance
Note:
[6] Bookham Test Conditions, 9.953Gb/s, 2^23-1 PRBS NRZ DATA.
6
Condition
Data Sheet
Reliability
Bookham has a corporate policy for continuous improvement, to provide optical components with superior quality in terms of
opto-electronic performance and operational life and reliability. The Bookham EML10 and EML11 Integrated Electro-absorption
laser products use a ridge waveguide structure for the laser and modulator, which provides superior reliability compared to buried
heterostructures. It has been subjected to a stringent reliability assurance program, the conclusions of which confirm product
reliability exceed the generic requirements of Telcordia GR-468 CORE.
More than 965,000 device-hours of data under accelerated life test conditions have been analysed, which for the purpose of
characterising random failure rate, is equivalent to 28,300,000 device hours at 25ºC operating temperature [7]. Electro-optic
parameters for a 15 year service life at operating temperature of 25ºC have been estimated. The estimated delta over life for
specific device parameters is shown in the table below.
Parameter
Maximum allowed change
Change over 15 years @ 25 °C
Mean (std. deviation)
EA - Extinction rate ER
0.5 dB
Laser threshold current
10 %
0.01 % (0.3 %)
Laser efficiency
10 %
-0.2 % (0.4 %)
Laser current for constant output power
10 %
0.2 % (0.4 %)
Laser power at constant current (100 mA)
10 %
-0.2 % (0.4 %)
-0.03 dB (0.2 dB)
The reliability failure rate statistics are summarized in the table below. The results are reported for the operation of the device
against a laser bias of 100 mA drive current. The resultant low MTTF [8], essentially demonstrating minimal component wear out
over the rated 15-year lifetime of the component [7].
Parameter
Value
Units
Median life (ML) at 25°C
528(1)
Years
σ (standard deviation of the natural logarithms of the TTFs)
0.64
µ (mean of the natural logarithms of the TTFs)
6.27
Maximum wear-out failure rate
0
FITs
Average wear-out failure rate over 15 years life
0
FITs
Wear-out thermal activation energy
0.5
eV
Random failure rate at 25°C at 60% confidence
33
FITs
Random failure rate activation energy
0.35
eV
Notes:
[7] Refer to QR1524, qualification report for the Bookham 10Gb/s Electro-Absorption Modulated Laser.
[8] Bookham Technology’s policy is to derive random failure rates from actual field data.
7
Data Sheet
Example
EML10W5575CA-J28 is a 1555.747nm EA laser with GPO RF connector and SC/PC fiber connector for 40km reach applications.
8
Wavelength
Code
Wavelength
( nm)
ITU-T
Frequency
(THz)
2955
1529.553
196.0
3033
1530.334
3112
Wavelength
Code
Wavelength
( nm)
ITU-T
Frequency
(THz)
+/-0.1
4532
1545.322
194.0
+/-0.1
195.9
+/-0.1
4612
1546.119
193.9
+/-0.1
1531.116
195.8
+/-0.1
4692
1546.917
193.8
+/-0.1
3190
1531.898
195.7
+/-0.1
4772
1547.715
193.7
+/-0.1
3268
1532.681
195.6
+/-0.1
4851
1548.515
193.6
+/-0.1
3347
1533.465
195.5
+/-0.1
4932
1549.315
193.5
+/-0.1
3425
1534.250
195.4
+/-0.1
5012
1550.116
193.4
+/-0.1
3504
1535.036
195.3
+/-0.1
5092
1550.918
193.3
+/-0.1
3582
1535.822
195.2
+/-0.1
5172
1551.721
193.2
+/-0.1
3661
1536.609
195.1
+/-0.1
5252
1552.524
193.1
+/-0.1
3740
1537.397
195.0
+/-0.1
5333
1553.329
193.0
+/-0.1
3819
1538.186
194.9
+/-0.1
5413
1554.134
192.9
+/-0.1
3898
1538.976
194.8
+/-0.1
5494
1554.940
192.8
+/-0.1
3977
1539.766
194.7
+/-0.1
5575
1555.747
192.7
+/-0.1
4056
1540.557
194.6
+/-0.1
5655
1556.555
192.6
+/-0.1
4135
1541.349
194.5
+/-0.1
5736
1557.363
192.5
+/-0.1
4214
1542.142
194.4
+/-0.1
5817
1558.173
192.4
+/-0.1
4294
1542.936
194.3
+/-0.1
5898
1558.983
192.3
+/-0.1
4373
1543.730
194.2
+/-0.1
5979
1559.794
192.2
+/-0.1
4453
1544.526
194.1
+/-0.1
6061
1560.606
192.1
+/-0.1
Tolerance
(nm)
Tolerance
(nm)
Data Sheet
RoHS Compliance
Bookham is fully committed to environment
protection and sustainable development and has
set in place a comprehensive program for
removing polluting and hazardous substances from
all of its products. The relevant evidence of RoHS
compliance is held as part of our controlled
documentation for each of our compliant products.
RoHS compliance parts are available to order,
please refer to the ordering information section for
further details.
Ordering Information:
EML10W****CA -
[Connector Type]
J28 = SC/PC
J34 = FC/PC
J57 = LC
J59 = MU
Example
EML10W5575CA-J28 is a 1555.747nm EA laser with GPO RF connector with
SC/PC fiber connector for 40km reach applications.
Contact Information
North America
Bookham Worldwide
Headquarters
Europe
Paignton Office
Asia
Shenzhen Office
2584 Junction Ave.
San Jose
CA 95134
USA
Brixham Road
Paignton
Devon
TQ4 7BE
United Kingdom
2 Phoenix Road
Futian Free Trade Zone
Shenzhen 518038
China
• Tel: +1 408 919 1500
• Tel: +44 (0) 1803 66 2000
• Fax: +1 408 919 6083
• Fax: +44 (0) 1803 66 2801
• Fax: +86 755 33305805
+86 755 33305807
• Tel: +86 755 33305888
Important Notice
Performance figures, data and any illustrative material
provided in this data sheet are typical and must be
specifically confirmed in writing by Bookham before
they become applicable to any particular order or
contract. In accordance with the Bookham policy of
continuous improvement specifications may change
without notice. The publication of information in this
data sheet does not imply freedom from patent or other
protective rights of Bookham or others. Further details
are available from any Bookham sales representative.
www.bookham.com
[email protected]
DANGER
INVISIBLE LASER RADIATION - AVOID
DIRECT EXPOSURE TO BEAM
INVISIBLE LASER
RADIATION DO NOT VIEW
DIRECTLY WITH OPTICAL
INSTRUMENTS
CLASS 1M LASER PRODUCT
REFERENCE IEC
60825-1 Edition 1.2
9
OUTPUT POWER 43 mW
WAVELENGTH >1520 nm
CLASS III b LASER PRODUCT
THIS PRODUCT
COMPLIES WITH
21CFR 1040.10
ISO14001:1996
EMS 504193
TL9000 Rev 3.0 (ISO9001:2000)
FM15040
Caution - use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
BH12960 Rev 2.0 January 2007.
©Bookham 2005. Bookham is a registered trademark of Bookham Inc.
Similar pages