DIODE(THREE PHASES BRIDGE TYPE) DF75AA120/160 UL;E76102 M Power Diode Module DF75AA is designed for three phase full wave rectification, which has six diodes connected in a three phase bridge configuration. The mounting base of the module is electrically isolted from semiconductor elements for simple heatsink Repetitive peak reverse construction. Output DC current is 75Amp Tc 100 voltage is up to 1600V. TjMax 150 Isolated mounting base High reliability by unique glass passivation Applications AC, DC Motor Drive/AVR/Switching -for three phase rectification Unit a Maximum Ratings Symbol Tj 25 Ratings Item DF75AA120 DF75AA160 Unit VRRM Repetitive Peak Reverse Voltage 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 1300 1700 V Symbol ID Item Conditions Output Current D.C. Surge Forward Current Three Phase full wave. TC 100 1cycle, 50/60HZ, peak value, non-repetitive I2t I2t Value for one of surge curent Tj Operating Junction Temperature IFSM Tstg Storage Temperature VISO Isolation Breakdown Voltage R.M.S. Mounting Torque Ratings 75 Recommended Value 1.5 2.5 15 25 2.7 28 Terminal M5 Recommended Value 1.5 2.5 15 25 Typical Value 2.7 28 160 A A2S 150 40 125 2500 A.C. 1 minute Mounting M5 Mass A 910/1000 4100 40 Unit V N m f B g Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. Tj 150 VFM Forward Voltage Drop, max. Tj 25 IFM 75A Inst. measurement Junction to case Rth j-c 139 Thermal Impedance, max. Conditions at VRRM Ratings Unit 10.0 mA 1.40 V 0.24 /W DF75AA120/160 140