DF005M - DF10M 1.0A GLASS PASSIVATED BRIDGE RECTIFIERS Features • • • • • • Glass Passivated Die Construction Low Forward Voltage Drop, High Current Capability Surge Overload Rating to 50A Peak Designed for Printed Circuit Board Applications UL Listed Under Recognized Component Index, File Number E94661 Lead Free Finish, RoHS Compliant (Date Code 0532+) (Note 3) B A Mechanical Data • • • • • • • DF-M C Dim Min Max A 7.40 7.90 B 6.20 6.50 C 0.22 0.30 D 1.27 2.03 E 7.60 8.90 G 3.81 4.69 H 8.13 8.51 J 2.40 3.40 K 5.00 5.20 L 0.46 0.58 E H Case: DF-M Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Solder Plated Leads, Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Case Marking Information: Type Number, See Page 3 Weight: 0.38 grams (approximate) D J G L K All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol DF 005M DF 01M DF 02M DF 04M DF 06M DF 08M DF 10M Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRWM VR 50 100 200 400 600 800 1000 V RMS Reverse Voltage VRMS 35 70 140 280 420 580 700 V Characteristic IO 1.0 A IFSM 50 A @ IF = 1.0 A VFM 1.1 V @ TA = 25°C @ TA = 125°C IRM 10 500 µA It 2 10.4 As Average Rectified Output Current @ TA = 40°C Non-Repetitive Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load Forward Voltage (per element) Peak Reverse Current at Rated DC Blocking Voltage (per element) 2 I t Rating for Fusing (t<8.3ms) 2 Typical Total Capacitance per element (Note 1) CT 25 pF Typical Thermal Resistance, Junction to Ambient (Note 2) RθJA 40 °C/W Tj, TSTG -65 to +150 °C Operating and Storage Temperature Range Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. 3. RοHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. DS21201 Rev. 15 - 2 1 of 3 www.diodes.com DF005M-DF10M © Diodes Incorporated I(AV), AVERAGE FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 1.0 0.5 0 40 100 120 140 60 80 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Output Current Derating Curve 1.0 0.1 0.01 0.6 1.2 0.4 0.8 1.0 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) 100 Tj = 25°C f = 1.0 Mhz Vsig = 50 mV p-p CT, TOTAL CAPACITANCE (pF) 60 IFSM, PEAK FORWARD SURGE CURRENT (A) 10 50 40 10 30 20 10 1 0 1 100 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current 1 100 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance (per element) 100 10 1.0 0.1 0.01 0 20 40 60 100 120 140 80 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typ Reverse Characteristics (per element) DS21201 Rev. 15 - 2 2 of 3 www.diodes.com DF005M-DF10M © Diodes Incorporated Ordering Information (Note 4) Packaging DF-M Device* DFxM Shipping Tube * x = Device type, e.g. DF005M or DF10M, etc. Notes: 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information XXXXX YWW = Manufacturers’ code marking XXXXX = Product type marking code, ex: DF10M YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21201 Rev. 15 - 2 3 of 3 www.diodes.com DF005M-DF10M © Diodes Incorporated