90MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09022 www. sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 89.85 90 90.15 Insertion Loss dB - 25 27 1 dB Bandwidth MHz - 11.81 - 3 dB Bandwidth MHz 11.9 12 - 40 dB Bandwidth MHz - 12.78 - Passband Variation dB - 0.5 1 Absolute Delay usec - 3.57 4 f0±6.4MHz dB 35 41 - f0±6.6MHz dB 45 62 - f0±7MHz dB 50 60 - f0±11MHz dB 55 62 - f0±15MHz dB 55 64 - Ultimate Rejection Material Temperature coefficient KHz/°C -8.46 Substrate Material - YZ LN Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1 DIP3512 (35.0x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN09022 Rev. Date 2007-09-21 Ver. 1.0 Fax: +86-23-62805284 Page www.sipatsaw.com / [email protected] 1/3 90MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09022 www. sipatsaw.com Matching Configuration Source/Load Impedance=50 ohm OUTPUT 50Ω INPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: 12.80 0.5 SIPAT LBN09022 07XX Input 1 Output 5 Ground All Others 4.7 Marking Configuration: 4.5 1) SIPAT: Manufacturer Name 2) LBN09022: Part Number 0.45 0.05 3) 07XX: Date Code 2.54 0.2 2.54 0.2 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 5 6 1 Package: DIP3512 7.62 0.2 4 3 2 25.40 0.2 Part Number LBN09022 Rev. Date 2007-09-21 Ver. 1.0 Fax: +86-23-62805284 Page www.sipatsaw.com / [email protected] 2/3 90MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09022 www. sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance -15.1384 -25.1384 -35.1384 -45.1384 -23.6384 3dB CF = 90.053MHz 1dB = 11.8059MHz 3dB = 12.0011MHz 40dB = 12.7801MHz Insert Loss = -25.1384dB Passband Ripple = 0.56111dB Ultimate Rejection = 60.3018dB Group Delay = 89.9694ns Phase Linearity = 3.4215deg Delay = 3.5708us -24.1384 -24.6384 -25.1384 -65.1384 -25.6384 -75.1384 -26.1384 -85.1384 -26.6384 -95.1384 -27.1384 -105.1384 -115.1384 70 75 80 85 90 Frequency(MHz) 95 Horizontal: 5MHz/Div 100 105 110 80 Vertical: 10dB/Div 82 84 86 88 90 92 Horizontal: 2MHz/Div Group Delay Variation(f0±5.5MHz) 94 96 98 100 Vertical: 0.5dB/Div Phase Linearity(f0±5.5MHz) Type Performance Type Performance 3750 8 3700 6 4 3650 X: 90 Y: 3590 3600 X: 95.5 Y: 1.309 2 X: 95.5 Y: 3573 X: 84.5 Y: 3559 X: 90 Y: -0.1648 0 Degree(deg) 3550 3500 X: 84.5 Y: -1.401 -2 -4 3450 -6 3400 -8 3350 -10 86 88 90 Frequency(MHz) 92 Horizontal: 2MHz/Div 94 96 98 -12 80 100 Vertical: 50ns/Div 82 84 86 88 +j2.0 100 +j5.0 0.0 0.5 ∞ -j5.0 -j0.2 +j2.0 +j0.2 0.2 5.0 2.0 1.0 98 Vertical: 2deg/Div +j0.5 +j5.0 +j0.2 0.5 96 +j1.0 +j0.5 ∞ -j5.0 -j0.2 -j2.0 -j0.5 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 94 Smith Chart S22 +j1.0 -j0.5 92 Horizontal: 2MHz/Div Smith Chart S11 0.0 90 Frequency(MHz) 5.0 84 2.0 82 1.0 3300 80 0.2 Group Delay Time(ns) Magnitude(dB) -55.1384 Part Number LBN09022 Rev. Date 2007-09-21 Ver. 1.0 Fax: +86-23-62805284 Page www.sipatsaw.com / [email protected] 3/3