IVO GI338.0604114 Incremental encoder Datasheet

Incremental encoders
Mini series, with hollow shaft
Resolution 5...2048 pulses
GI338
Features
–– Mini encoder with end or hollow shaft
–– Resolution max. 2048 ppr
–– Housing ø40 mm
–– High rotation speed max. 12000 rpm
–– Operating temperature range -20...+85°C
–– End shaft up to ø12 mm, hollow shaft up to ø6 mm
–– Cost-efficient mounting
Technical data - mechanical design
Voltage supply
Housing
ø40 mm
Shaft
ø6 mm hollow shaft
ø8 mm end shaft
ø12 mm end shaft
Protection DIN EN 60529
IP 42
IP 65
Operating speed
≤6000 rpm IP 65
≤12000 rpm IP 42
Materials
Housing: polyamide black
Flange: aluminium
Shaft: stainless
5 VDC ±10 %
10...30 VDC
Reverse polarity protection Yes (10...30 VDC)
Consumption w/o load
≤60 mA
Resolution (steps/turn)
5...2048
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤100 kHz
Output signals
A 90° B, N + inverted
Output circuit
Linedriver RS422
Push-pull short-circuit proof
Operating temperature
-20...+85 °C
Interference immunity
DIN EN 61000-6-2
Relative humidity
95 % non-condensing
Emitted interference
DIN EN 61000-6-4
Resistance
DIN EN 60068-2-6
Vibration 10 g, 16-200 Hz
DIN EN 60068-2-27
Shock 50 g, 11 ms
Weight approx.
85 g
E-connection
Cable 1 m
Output signals
Clockwise rotating direction when looking at flange.
Output signals 5 VDC, linedriver
Track A
Track A
Clockwise rotating direction when looking at flange.
Output signals 10...30 VDC, push-pull
Track B
Track A
Track B
Zero pulse
Track B
90°
Zero pulse
Zero pulse
1
90°
www.baumerivo.com
30/10/2008
Technical data - electrical ratings
Subject to modification in technic and design. Errors and omissions excepted.
GI338 with hollow shaft
Incremental encoders
Mini series, with hollow shaft
Resolution 5...2048 pulses
GI338
Part number
Terminal assignment
GI338.
Linedriver
41
Core colour Assignment
See part number (pulses)
E-connection
41 Cable 1 m, radial
Voltage supply / signals
22 5 VDC / linedriver RS422
60 10…30 VDC / push-pull
Hollow shaft
Hollow shaft ø6 mm torque support / IP 65
Hollow shaft ø6 mm spring washer / IP 65
End shaft ø8 mm spring coupling / IP 65
Hollow shaft ø6 mm torque support / IP 42
End shaft ø12 mm spring coupling / IP 65
0
1
3
4
7
(5)
(50)
(60)
(100)
06
09
13
14
(200)
(250)
(360)
(400)
15
22
23
28
(500)
(1000)
(1024)
(2000)
UB
green
Track A
red
Track A inv.
yellow
Track B
blue
Track B inv.
pink
Track N (zero pulse)
grey
Track N inv. (zero pulse inv.)
white
GND
Push-pull
Core colour Assignment
Part number (pulses)
49
39
40
41
brown
29 (2048)
brown
UB
green
Track A
yellow
Track B
pink
Track N (zero pulse)
white
GND
Please use cores twisted in pairs (for example track A /
track A inv.) for extension cables of more than 10 m length.
Other pulse numbers upon request.
Example: ordering key 23 = 1024 pulses
33.5
12 33.5
9 ±1
6.5
0.5
40
6.5
27
GI338 end shaft ø12 mm
39.5
7
1.5
6.5
ø40
6.5
8.4
ø3.5
ø45
2
ø12 H7 x 20
2.4
ø8H7 x 20
ø40
53
1.5
6.5
8.4
39.5
5.5
27
GI338 end shaft ø8 mm
7
ø3.5
8.5
ø6H7
8.5
1
5.5
ø45
6
2.4
ø16
R15 ±3
ø3 x 16
GI338 hollow shaft ø6 mm / spring washer
R=17.5±0.5
www.baumerivo.com
30/10/2008
GI338 hollow shaft ø6 mm / torque support
Subject to modification in technic and design. Errors and omissions excepted.
Dimensions
Similar pages