Anachip AP1117T-19A 1a low dropout positive adjustable or fixed-mode regulator Datasheet

AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Features
General Description
AP1117 is a low dropout positive adjustable or
fixed-mode regulator with minimum of 1A output
current capability. The product is specifically
designed to provide well-regulated supply for low
voltage IC applications such as high-speed bus
termination and low current 3.3V logic supply.
AP1117 is also well suited for other applications
such as VGA cards. AP1117 is guaranteed to have
lower than 1.4V dropout at full load current making
it ideal to provide well-regulated outputs of 1.25 to
5.0 with 6.4V to 12V input supply.
- 1.4V maximum dropout at full load current
- Fast transient response
- Output current limiting
- Built-in thermal shutdown
- Packages: SOT223, TO263, TO252, TO220,
SOT89
- Good noise rejection
- 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 1.9V,
2.5V, 3.3V, 5.0V
Applications
- PC peripheral
- Communication
Ordering Information
AP 1117 X XX X X
Package
Low Dropout Regulator
E : SOT223-3L
K : TO263-3L
D : TO252-3L
T : TO220-3L
Y : SOT89-3L
Vout
Blank : ADJ Blank : Normal
15 : 1.5V
L : Lead Free Package
18 : 1.8V
19: 1.9V
25 : 2.5V
33 : 3.3V
50 : 5.0V
Typical Circuit
5V
5V
Vin
Vin
GND
Blank : Tube
A : Taping
C1
100uF
C1
100uF
Vout
Packing
Lead Free
Vo
Vout
3.3V/1A
C2
100uF
Adj
Tab is Vout
R1
121 Ω
R2
121 Ω
2.5V/1A
C2
100uF
Tab is Vout
( 5V/3.3V fixed output )
( 5V/2.5V ADJ output )
Note: Vo = VREF ∗ (1+
R2
)
R1
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev.1.0 Aug 17, 2004
1/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Connection Diagram
3 PIN SOT223
3 PIN TO252 / TO263
( Top View )
( Top View )
3
Vin
2
Vout
1
Adj (GND)
Vin
3
2
1
Tab is Vout
Vout
Adj (GND)
Tab is Vout
3 PIN SOT89
3 PIN TO220
3
Vin
3
Vin
2
Vout
2
Vout
1
Adj (GND)
1
Adj (GND)
Tab is Vout
Tab is Vout
Block Diagram
Vin
3
2
Vout
+
+
1.25V
-
CURRENT
LIMIT
1
+
-
Thermal
Shutdown
Anachip Corp.
www.anachip.com.tw
+
GND
(FIXED)
1
Adj
Rev.1.0 Aug 17, 2004
2/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Pin Descriptions
NAME
I/O
PIN #
FUNCTION
Adj (GND)
I
1
A resistor divider from this pin to the Vout pin and ground sets the
output voltage. (Ground only for Fixed-Mode)
Vout
O
2
The output of the regulator. A minimum of 10uF capacitor (0.15Ω
≤ ESR ≤ 20Ω) must be connected from this pin to ground to insure
stability.
3
The input pin of regulator. Typically a large storage capacitor
(0.15Ω ≤ ESR ≤ 20Ω) is connected from this pin to ground to
insure that the input voltage does not sag below the minimum
dropout voltage during the load transient response. This pin must
always be 1.3V higher than Vout in order for the device to
regulate properly.
Vin
I
Absolute Maximum Ratings
Symbol
Parameter
Vin
DC Supply Voltage
PD
Power Dissipation
TST
Storage Temperature
TOP
Operating Junction Temperature Range
Rating
Unit
-0.3 to 12
V
Internally Limited
Anachip Corp.
www.anachip.com.tw
-65 to +150
oC
0 to +150
oC
Rev.1.0 Aug 17, 2004
3/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Electrical Characteristics (Under Operating Conditions)
PARAMETER
Reference Voltage
AP1117-ADJ
AP1117-1.5
AP1117-1.8
AP1117-1.9
Output Voltage
AP1117-2.5
AP1117-3.3
AP1117-5.0
Line Regulation
AP1117-XXX
AP1117-ADJ
AP1117-1.5
AP1117-1.8
Load Regulation
AP1117-1.9
AP1117-2.5
AP1117-3.3
AP1117-5.0
CONDITIONS
TJ=25oC,(VIN-OUT)=1.5V
IO=10mA
IOUT = 10mA, TJ = 25oC,
3V≦VIN≦12V
o
IOUT = 10mA, TJ = 25 C,
3.3V≦VIN≦12V
IOUT = 10mA, TJ = 25oC,
3.3V≦VIN≦12V
IOUT = 10mA, TJ = 25oC,
4V≦VIN≦12V
IOUT = 10mA, TJ = 25oC,
4.8V≦VIN≦12V
IOUT = 10mA, TJ = 25oC,
6.5V≦VIN≦12V
IO=10mA,VOUT+1.5V<VIN<12V,
TJ=25oC
VIN=3.3V,Vadj=0,0mA<Io<1A,
TJ=25oC (Note 1,2)
VIN=3V, 0mA<Io<1A,
TJ=25oC (Note 1,2)
VIN=3.3V, 0mA<Io<1A,
TJ=25oC (Note 1,2)
VIN=3.3V, 0mA<Io<1A,
TJ=25oC (Note 1,2)
VIN=4V, 0mA<Io<1A,
TJ=25oC (Note 1,2)
VIN = 5V, 0≦IOUT≦1A,
o
TJ=25 C (Note 1,2)
VIN = 8V, 0≦IOUT≦1A,
TJ=25oC (Note 1,2)
MIN
TYP
MAX
UNIT
1.225
1.250
1.275
V
1.470
1.500
1.530
V
1.764
1.800
1.836
V
1.862
1.900
1.938
V
2.450
2.500
2.550
V
3.235
3.300
3.365
V
4.900
5.000
5.100
V
0.2
%
1
%
12
15
mV
15
18
mV
16
19
mV
20
25
mV
26
33
mV
40
50
mV
1.3
1.4
V
Dropout Voltage
(VIN-VOUT)
AP1117-ADJ/1.5/1.8
IOUT = 1A ,∆VOUT=0.1%VOUT
/1.9/2.5/3.3/5.0
AP1117-ADJ/1.5/1.8
(VIN-VOUT) = 5V
Current Limit
/1.9/2.5/3.3/5.0
o
o
0 C≦Tj≦125 C
Minimum Load Current
AP1117-XXX
o
Thermal Regulation
TA=25 C, 30ms pulse
F=120Hz,COUT=25uF Tantalum, IOUT=1A
Ripple Rejection
AP1117-XXX
VIN=VOUT+3V
Temperature Stability
IO=10mA
θ JA Thermal Resistance SOT89
SOT-223
Junction-to-Ambient(No TO-252
heat sink ;No air flow)
TO-220/263
SOT89 : Control Circuitry/Power Transistor
θ JC Thermal Resistance SOT-223 : Control Circuitry/Power Transistor
TO-263 : Control Circuitry/Power Transistor
Junction-to-Case
TO-252 : Control Circuitry/Power Transistor
TO-220 : Control Circuitry/Power Transistor
1. 1
A
5
0.008
10
0.04
mA
%/W
60
0.5
300
117
92
85
100
15
0.65/2.7
10
0.65/2.7
70
dB
%
O
C/W
O
C/W
Note1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant
junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package.
Note2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference between
input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range.
Note3: Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the
device is guaranteed to regulate if the output current is greater than 10mA.
Anachip Corp.
www.anachip.com.tw
Rev.1.0 Aug 17, 2004
4/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Typical Performance Characteristics
0.20
2. 0
Output Voltage Deviation (%)
1. 8
1. 6
Dropout Voltage (V)
1. 4
1. 2
0
I load=800mA
-0.20
Tj = 25 oC
1. 0
-0.40
0. 8
Tj = 125 oC
0. 6
-0.80
0. 4
0. 2
0
0
250
500
Output Current (mA)
750
-1
1000
-25
Dropout Voltage vs Output Current
0
25
50
Temperature (oC)
75
100
125
Load Regulation vs Temperature
2
1
0.8
1
0. 5
0
-0.5
-1
-1.5
-2
-50
-25
0
25
50
Temperature (oC)
75
100
125
150
Output Voltage Deviation (%)
Output Voltage Change (%)
1.5
0.6
0.4
0.2
0
2
4
7.5
Cin=1uF
Cout=10uF Tantalum
6.5
5.5
40
20
0
-20
-40
0
20
40
60
80
100 120 140 160 180 200
TIME (us)
Line Transient Response
8
10
12
Line Regulation
Load Current (A) Output Voltage Deviation (mV)
Output Voltage Deviation (mV) Input Voltage (V)
Percent Change in Output Voltage vs Temperature
6
Input Voltage (V)
30
C in = 1uF
C out = 10 uF Tantalum
Preload = 100mA
20
10
0
-10
-20
2
1
0
-1
0
10
20
30
40
50
TIME (us)
60
70
80
90
100
Load Transient Response
Anachip Corp.
www.anachip.com.tw
Rev.1.0 Aug 17, 2004
5/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Marking Information
(2) TO252-3L
(1) SOT223-3L
(Top view)
(Top view)
XXX
1117X
ID Code
Month: A~L = 01~12
Year: "1" = 2001
"2" = 2002
1 7- 33
XXXX XX
Blank: normal
L: Lead Free Package
ID Code
Xth Week: 01~52
Year: "01" = 2001
"02" = 2002
~
Blank: normal
L: Lead Free Package
(4) SOT89-3L
(3) TO220-3L
( Top view )
Output Type:
1117: ADJ
1117-15: 1.5V
1117-18: 1.8V
1117-19: 1.9V
1117-25: 2.5V
1117-33: 3.3V
1117-50: 5.0V
Logo
Output Type:
1117: Adjustable
17-15: 1.5V
17-18: 1.8V
17-19: 1.9V
17-25: 2.5V
17-33: 3.3V
17-50: 5.0V
~
Logo
Output Type:
1117 : ADJ
17-15: 1.5V
17-18: 1.8V
17-19: 1.9V
17-25: 2.5V
17-33: 3.3V
17-50: 5.0V
1117-33
XX XX X X
XX
XX X
Date Code
Month: A~L
Year: 0~9
Logo
Blank: normal
L: Lead Free Package
ID code
Xth week: 01~52
Year: "01" = 2001
"02" = 2002
1
2
Identification
code
3
Identification Code
( See the table )
Blank: normal
L: Lead Free Package
Output version
~
DA
AP1117-ADJ
DB
AP1117-1.5V
DC
AP1117-1.8V
DG
AP1117-1.9V
DD
AP1117-2.5V
DE
AP1117-3.3V
DF
AP1117-5.0V
(5) TO263-3L
( Top view )
Logo
1117-33
XX XX X X
Blank: normal
L: Lead Free Package
ID code
Xth week: 01~52
Year: "01" = 2001
"02" = 2002
~
Output Type:
1117: ADJ
1117-15: 1.5V
1117-18: 1.8V
1117-19: 1.9V
1117-25: 2.5V
1117-33: 3.3V
1117-50: 5.0V
Anachip Corp.
www.anachip.com.tw
Rev.1.0 Aug 17, 2004
6/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Package Dimension
(1) SOT223
D
B1
E
1.6
H
6.4
1.6
3.3
K
Land Pattern Recommendation (Unit: mm)
B
Symbol
A
a
ß
c
A1
A
e1
ß
2.3
1.2
e
L
Seating Plane
Dimensions In Millimeters
Dimensions In Inches
Min.
Nom.
Max.
Min.
Nom.
Max.
1.50
1.65
1.80
0.059
0.065
0.071
A1
0.02
0.05
0.08
0.001
0.002
0.003
B
0.60
0.70
0.80
0.024
0.028
0.031
B1
2.90
-
3.15(Ref.)
0.114
-
0.124(Ref.)
c
0.28
0.30
0.32
0.011
0.012
0.013
D
6.30
6.50
6.70
0.248
0.256
0.264
E
3.30
3.50
3.70
0.130
0.138
0.146
e
2.3 Basic
0.091 Basic
e1
4.6 Basic
0.181 Basic
H
6.70
7.00
7.30
0.264
0.276
0.287
L
0.91
1.00
1.10
0.036
0.039
0.043
K
α
1.50
1.75
2.00
0.059
0.069
0.079
0°
5
10°
0°
5
β
-
13o
-
-
13o
o
Anachip Corp.
www.anachip.com.tw
o
10°
-
Rev.1.0 Aug 17, 2004
7/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
(2) TO263
10.9
L3
3
L
15.7
D
9.1
L2
E
1.3
b
b2
2.54
Land Pattern Recommendation (Unit: mm)
C2
A
C
e
L1
Symbol
A
b
b2
C
C2
D
E
e
L
L1
L2
L3
Dimensions In Millimeters
Min.
Nom.
Max.
4.06
4.45
4.83
0.51
0.75
0.99
1.14
1.27
1.40
0.38 TYP.
1.14
1.27
1.40
8.65
9.15
9.65
9.65
9.97
10.29
2.54 BSC.
14.61
15.24
15.88
2.28
2.54
2.80
1.30
2.92
1.27
1.52
1.78
Anachip Corp.
www.anachip.com.tw
Dimensions In Inches
Min.
Nom.
Max.
0.160
0.175
0.190
0.020
0.030
0.039
0.045
0.050
0.055
0.015 TYP.
0.045
0.050
0.055
0.341
0.380
0.575
0.360
0.393
0.100 BSC.
0.600
0.380
0.405
0.625
0.090
0.050
0.100
0.051
0.060
0.110
0.115
0.070
Rev.1.0 Aug 17, 2004
8/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
(3) TO252
5.6
L2
E
7.2
D
11.0
5.6
b2
2.0
2.25
L1
1.2
Land Pattern Recommendation (Unit: mm)
e
e1
Notes:
1.
2.
Symbol
A
A1
b
b2
C
C1
D
E
e
e1
H
L
L1
L2
SEATING PLANE
A
L
SEE NOTE2
A1
C
H
C1
b
JEDEC Outline: TO-252 AB
Mils suggested for positive contact at mounting.
Dimensions In Millimeters
Min.
Nom.
Max.
2.18
2.29
2.39
1.02
1.15
1.27
0.61 TYP.
5.20
5.35
5.50
0.46
0.52
0.58
0.46
0.52
0.58
5.33
5.57
5.80
6.35
6.58
6.80
2.25 BSC.
4.50 BSC.
9.00
9.70
10.40
0.51
0.64
0.83
1.02
1.52
1.78
2.03
Anachip Corp.
www.anachip.com.tw
Dimensions In Inches
Min.
Nom.
Max.
0.086
0.090
0.094
0.040
0.045
0.050
0.024 TYP.
0.205
0.211
0.217
0.018
0.020
0.023
0.018
0.020
0.023
0.210
0.219
0.228
0.250
0.259
0.268
0.089 BSC.
0.177 BSC.
0.354
0.382
0.409
0.020
0.025
0.033
0.040
0.060
0.070
0.080
Rev.1.0 Aug 17, 2004
9/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
(4) TO220
E
A
F
SEATING PLANE
Q
ΦP
L1
D
H1
L
b1
C
b
J1
e
e1
Symbol
A
b1
b
C
D
E
e
e1
F
H1
J1
L
L1
øP
Q
Dimensions In Millimeters
Min.
Nom.
Max.
3.55
4.20
4.85
1.14
1.46
1.78
0.51
0.83
1.14
0.31
0.72
1.14
14.20
15.35
16.50
9.70
10.20
10.70
2.29
2.54
2.79
4.83
5.08
5.33
0.51
0.95
1.40
5.84
6.35
6.86
2.03
2.48
2.92
12.72
13.72
14.72
3.66
5.00
6.35
3.53
3.81
4.09
2.54
2.98
3.43
Anachip Corp.
www.anachip.com.tw
Dimensions In Inches
Min.
Nom.
Max.
0.140
0.165
0.191
0.045
0.057
0.070
0.020
0.033
0.045
0.012
0.028
0.045
0.559
0.604
0.650
0.382
0.402
0.421
0.090
0.100
0.110
0.190
0.200
0.210
0.020
0.037
0.055
0.230
0.250
0.270
0.080
0.098
0.115
0.501
0.540
0.580
0.144
0.197
0.250
0.139
0.150
0.161
0.100
0.117
0.135
Rev.1.0 Aug 17, 2004
10/11
AP1117
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
(5) SOT89
1.7
HE
E
2.7
D1
1.3
L
1.9
0.4
1.5
0.9
Land Pattern Recommendation (Unit: mm)
e1
e
50(2x)
80(2x)
A
D
C
b
Symbol
A
B
b1
C
D
D1
e
e1
E
HE
L
b1
b
Dimensions In Millimeters
Min.
1.40
0.36
0.41
0.35
4.40
1.40
2.90
1.45
2.35
3.94
0.80
Nom.
1.50
0.42
0.47
0.39
4.50
1.60
3.00
1.50
2.48
-
Max.
1.60
0.48
0.53
0.43
4.60
1.75
3.10
1.55
2.60
4.25
1.20
Anachip Corp.
www.anachip.com.tw
Dimensions In Inches
Min.
0.055
0.014
0.016
0.014
0.173
0.055
0.114
0.057
0.093
0.155
0.031
Nom.
0.059
0.016
0.043
0.015
0.177
0.062
0.118
0.059
0.098
-
Max.
0.063
0.018
0.051
0.017
0.181
0.069
0.122
0.061
0.102
0.167
0.047
Rev.1.0 Aug 17, 2004
11/11
Similar pages