Panasonic ABS1632403 High environmental resistance Datasheet

VDE
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE SWITCHES
ABS TYPE
FEATURES
19.3
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
6.4
11.1
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
RoHS compliant
ORDERING INFORMATION
Ex. ABS
Type of
switch
Wire and
terminal
position
1
Terminal
ABS:
1: Straight type 1: .110 quick-connect
Turquoise 4: Right angle
terminal
switch
5: Left angle
4: Solder terminal
S type
5: PC board terminal
6: Wire leads
Remarks: 1.
2.
3.
4.
5.
1
1
0
4
0
3
Operating
force by
Contact*
Agency standard
pin plunger
(max.)
1: SPDT
0: Pin plunger
4: 0.98 N
0: AgNi alloy
3: UL/CSA/VDE/SEMKO
2: SPST-NC 1: Short hinge lever 5: 1.47 N
1: Au-clad
(AgNi alloy contact,
3: SPST-NO 2: Hinge lever
triple layer
Au-clad triple layer type)
3: Long hinge lever
4: Au-clad
9: UL/CSA
4: Simulated roller
double layer
(Au-clad double layer type)
lever
6: Roller lever
8: Leaf lever
Contact
arrangement
Actuator
Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
SPST-NC and SPST-NO are only available for wire leads type.
Leaf lever is only available for wire leads type
Wire leads type with agency standard will be discontinued from August 31, 2012.
As for wire position:
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
0: AgNi alloy
1: Au-clad triple layer
AgNi alloy
Au-clad
AgNi alloy
CuNi alloy
Panasonic Corporation
Automation Controls Business Unit
4: Au-clad double layer
Au-clad
CuNi alloy
industrial.panasonic.com/ac/e
AECTB2E 201201-T
ABS1,4,5
CONTACT ARRANGEMENT
1. SPDT
2. SPST-NC (Wire leads type only)
COM
NO
NC
COM
3. SPST-NO (Wire leads type only)
NC
COM
NO
PRODUCT TYPES
1. Dust protected type
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
.110
quick-connect
terminal
Solder terminal
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
ABS1110403
ABS1110503
ABS1111403
ABS1111503
ABS1112403
ABS1112503
ABS1113403
ABS1113503
ABS1410403
ABS1410503
ABS1411403
ABS1411503
ABS1412403
ABS1412503
ABS1413403
ABS1413503
0.34 N
0.54 N
0.39 N
0.59 N
ABS1114403
ABS1114503
ABS1116403
ABS1116503
ABS1414403
ABS1414503
ABS1416403
ABS1416503
Operating force
Max.
.110
quick-connect
terminal
Solder terminal
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS1110413
ABS1110513
ABS1111413
ABS1111513
ABS1112413
ABS1112513
ABS1113413
ABS1113513
ABS1114413
ABS1114513
ABS1116413
ABS1116513
ABS1410413
ABS1410513
ABS1411413
ABS1411513
ABS1412413
ABS1412513
ABS1413413
ABS1413513
ABS1414413
ABS1414513
ABS1416413
ABS1416513
Operating force
Max.
.110
quick-connect
terminal
Solder terminal
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS1110449
ABS1110549
ABS1111449
ABS1111549
ABS1112449
ABS1112549
ABS1113449
ABS1113549
ABS1114449
ABS1114549
ABS1116449
ABS1116549
ABS1410449
ABS1410549
ABS1411449
ABS1411549
ABS1412449
ABS1412549
ABS1413449
ABS1413549
ABS1414449
ABS1414549
ABS1416449
ABS1416549
Straight
ABS1510403
ABS1510503
ABS1511403
ABS1511503
ABS1512403
ABS1512503
ABS1513403
ABS1513503
PC board terminal
Terminal position
Right angle
ABS4510403
ABS4510503
ABS4511403
ABS4511503
ABS4512403
ABS4512503
ABS4513403
ABS4513503
Left angle
ABS5510403
ABS5510503
ABS5511403
ABS5511503
ABS5512403
ABS5512503
ABS5513403
ABS5513503
ABS1514403
ABS1514503
ABS1516403
ABS1516503
ABS4514403
ABS4514503
ABS4516403
ABS4516503
ABS5514403
ABS5514503
ABS5516403
ABS5516503
Straight
ABS1510413
ABS1510513
ABS1511413
ABS1511513
ABS1512413
ABS1512513
ABS1513413
ABS1513513
ABS1514413
ABS1514513
ABS1516413
ABS1516513
PC board terminal
Terminal position
Right angle
ABS4510413
ABS4510513
ABS4511413
ABS4511513
ABS4512413
ABS4512513
ABS4513413
ABS4513513
ABS4514413
ABS4514513
ABS4516413
ABS4516513
Left angle
ABS5510413
ABS5510513
ABS5511413
ABS5511513
ABS5512413
ABS5512513
ABS5513413
ABS5513513
ABS5514413
ABS5514513
ABS5516413
ABS5516513
Straight
ABS1510449
ABS1510549
ABS1511449
ABS1511549
ABS1512449
ABS1512549
ABS1513449
ABS1513549
ABS1514449
ABS1514549
ABS1516449
ABS1516549
PC board terminal
Terminal position
Right angle
ABS4510449
ABS4510549
ABS4511449
ABS4511549
ABS4512449
ABS4512549
ABS4513449
ABS4513549
ABS4514449
ABS4514549
ABS4516449
ABS4516549
Left angle
ABS5510449
ABS5510549
ABS5511449
ABS5511549
ABS5512449
ABS5512549
ABS5513449
ABS5513549
ABS5514449
ABS5514549
ABS5516449
ABS5516549
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Au-clad double layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
* Agency standard: Please refer to “Ordering information”.
AECTB2E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ABS1,4,5
2. Immersion protected type (3 wire leads type SPDT) With agency standard type will be discontinued from August 31, 2012.
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Straight
ABS1610403
ABS1610503
ABS1611403
ABS1611503
ABS1612403
ABS1612503
ABS1613403
ABS1613503
ABS1614403
ABS1614503
ABS1616403
ABS1616503
SPDT
Wire position
Right angle
ABS4610403
ABS4610503
ABS4611403
ABS4611503
ABS4612403
ABS4612503
ABS4613403
ABS4613503
ABS4614403
ABS4614503
ABS4616403
ABS4616503
Left angle
ABS5610403
ABS5610503
ABS5611403
ABS5611503
ABS5612403
ABS5612503
ABS5613403
ABS5613503
ABS5614403
ABS5614503
ABS5616403
ABS5616503
0.98 N
Straight
ABS1610413
SPDT
Wire position
Right angle
ABS4610413
Left angle
ABS5610413
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
ABS1610513
ABS1611413
ABS1611513
ABS1612413
ABS1612513
ABS1613413
ABS1613513
ABS1614413
ABS1614513
ABS1616413
ABS1616513
ABS4610513
ABS4611413
ABS4611513
ABS4612413
ABS4612513
ABS4613413
ABS4613513
ABS4614413
ABS4614513
ABS4616413
ABS4616513
ABS5610513
ABS5611413
ABS5611513
ABS5612413
ABS5612513
ABS5613413
ABS5613513
ABS5614413
ABS5614513
ABS5616413
ABS5616513
Straight
ABS1610449
ABS1610549
ABS1611449
ABS1611549
ABS1612449
ABS1612549
ABS1613449
ABS1613549
ABS1614449
ABS1614549
ABS1616449
ABS1616549
SPDT
Wire position
Right angle
ABS4610449
ABS4610549
ABS4611449
ABS4611549
ABS4612449
ABS4612549
ABS4613449
ABS4613549
ABS4614449
ABS4614549
ABS4616449
ABS4616549
Left angle
ABS5610449
ABS5610549
ABS5611449
ABS5611549
ABS5612449
ABS5612549
ABS5613449
ABS5613549
ABS5614449
ABS5614549
ABS5616449
ABS5616549
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
Au-clad double layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
* Agency standard: Please refer to “Ordering information”.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB2E 201201-T
ABS1,4,5
3. Immersion protected type (2 wire leads type SPST-NC) With agency standard type will be discontinued from August 31,
2012.
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Straight
ABS1620403
ABS1620503
ABS1621403
ABS1621503
ABS1622403
ABS1622503
ABS1623403
ABS1623503
ABS1624403
ABS1624503
ABS1626403
ABS1626503
SPST-NC
Wire position
Right angle
ABS4620403
ABS4620503
ABS4621403
ABS4621503
ABS4622403
ABS4622503
ABS4623403
ABS4623503
ABS4624403
ABS4624503
ABS4626403
ABS4626503
Straight
SPST-NC
Wire position
Right angle
Left angle
ABS1620413
ABS1620513
ABS1621413
ABS1621513
ABS1622413
ABS1622513
ABS1623413
ABS1623513
ABS1624413
ABS1624513
ABS1626413
ABS1626513
ABS4620413
ABS4620513
ABS4621413
ABS4621513
ABS4622413
ABS4622513
ABS4623413
ABS4623513
ABS4624413
ABS4624513
ABS4626413
ABS4626513
ABS5620413
ABS5620513
ABS5621413
ABS5621513
ABS5622413
ABS5622513
ABS5623413
ABS5623513
ABS5624413
ABS5624513
ABS5626413
ABS5626513
Straight
ABS1620449
ABS1620549
ABS1621449
ABS1621549
ABS1622449
ABS1622549
ABS1623449
ABS1623549
ABS1624449
ABS1624549
ABS1626449
ABS1626549
SPST-NC
Wire position
Right angle
ABS4620449
ABS4620549
ABS4621449
ABS4621549
ABS4622449
ABS4622549
ABS4623449
ABS4623549
ABS4624449
ABS4624549
ABS4626449
ABS4626549
Left angle
ABS5620449
ABS5620549
ABS5621449
ABS5621549
ABS5622449
ABS5622549
ABS5623449
ABS5623549
ABS5624449
ABS5624549
ABS5626449
ABS5626549
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Left angle
ABS5620403
ABS5620503
ABS5621403
ABS5621503
ABS5622403
ABS5622503
ABS5623403
ABS5623503
ABS5624403
ABS5624503
ABS5626403
ABS5626503
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad double layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
* Agency standard: Please refer to “Ordering information”.
AECTB2E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ABS1,4,5
4. Immersion protected type (2 wire leads type SPST-NO) With agency standard type will be discontinued from August 31,
2012.
AgNi alloy
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Straight
ABS1630403
ABS1630503
ABS1631403
ABS1631503
ABS1632403
ABS1632503
ABS1633403
ABS1633503
ABS1634403
ABS1634503
ABS1636403
ABS1636503
SPST-NO
Wire position
Right angle
ABS4630403
ABS4630503
ABS4631403
ABS4631503
ABS4632403
ABS4632503
ABS4633403
ABS4633503
ABS4634403
ABS4634503
ABS4636403
ABS4636503
Straight
SPST-NO
Wire position
Right angle
Left angle
ABS1630413
ABS1630513
ABS1631413
ABS1631513
ABS1632413
ABS1632513
ABS1633413
ABS1633513
ABS1634413
ABS1634513
ABS1636413
ABS1636513
ABS4630413
ABS4630513
ABS4631413
ABS4631513
ABS4632413
ABS4632513
ABS4633413
ABS4633513
ABS4634413
ABS4634513
ABS4636413
ABS4636513
ABS5630413
ABS5630513
ABS5631413
ABS5631513
ABS5632413
ABS5632513
ABS5633413
ABS5633513
ABS5634413
ABS5634513
ABS5636413
ABS5636513
Straight
ABS1630449
ABS1630549
ABS1631449
ABS1631549
ABS1632449
ABS1632549
ABS1633449
ABS1633549
ABS1634449
ABS1634549
ABS1636449
ABS1636549
SPST-NO
Wire position
Right angle
ABS4630449
ABS4630549
ABS4631449
ABS4631549
ABS4632449
ABS4632549
ABS4633449
ABS4633549
ABS4634449
ABS4634549
ABS4636449
ABS4636549
Left angle
ABS5630449
ABS5630549
ABS5631449
ABS5631549
ABS5632449
ABS5632549
ABS5633449
ABS5633549
ABS5634449
ABS5634549
ABS5636449
ABS5636549
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Left angle
ABS5630403
ABS5630503
ABS5631403
ABS5631503
ABS5632403
ABS5632503
ABS5633403
ABS5633503
ABS5634403
ABS5634503
ABS5636403
ABS5636503
Au-clad triple layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
Au-clad double layer
Actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Operating force
Max.
0.98 N
1.47 N
0.39 N
0.59 N
0.34 N
0.54 N
0.25 N
0.44 N
0.34 N
0.54 N
0.39 N
0.59 N
* Agency standard: Please refer to “Ordering information”.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB2E 201201-T
ABS1,4,5
5. Immersion protected type (3 wire leads type SPDT) With agency standard type will be discontinued from August 31, 2012.
• Leaf lever type
AgNi alloy
Actuator
0.88 N
1.08 N
Leaf lever
Straight
ABS1618403
ABS1618503
SPDT
Wire position
Right angle
ABS4618403
ABS4618503
Left angle
ABS5618403
ABS5618503
Straight
ABS1618413
ABS1618513
SPDT
Wire position
Right angle
ABS4618413
ABS4618513
Left angle
ABS5618413
ABS5618513
Straight
ABS1618449
ABS1618549
SPDT
Wire position
Right angle
ABS4618449
ABS4618549
Left angle
ABS5618449
ABS5618549
Operating force
Max.
Au-clad triple layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
Au-clad double layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
6. Immersion protected type (2 wire leads type SPST-NC) With agency standard type will be discontinued from August 31,
2012.
• Leaf lever type
AgNi alloy
Actuator
0.88 N
1.08 N
Leaf lever
Straight
ABS1628403
ABS1628503
SPST-NC
Wire position
Right angle
ABS4628403
ABS4628503
Left angle
ABS5628403
ABS5628503
Straight
ABS1628413
ABS1628513
SPST-NC
Wire position
Right angle
ABS4628413
ABS4628513
Left angle
ABS5628413
ABS5628513
Straight
ABS1628449
ABS1628549
SPST-NC
Wire position
Right angle
ABS4628449
ABS4628549
Left angle
ABS5628449
ABS5628549
Operating force
Max.
Au-clad triple layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
Au-clad double layer
Actuator
Operating force
Max.
0.88 N
1.08 N
Leaf lever
7. Immersion protected type (2 wire leads type SPST-NO) With agency standard type will be discontinued from August 31,
2012.
• Leaf lever type
AgNi alloy
Actuator
0.88 N
1.08 N
Leaf lever
Straight
ABS1638403
ABS1638503
SPST-NO
Wire position
Right angle
ABS4638403
ABS4638503
Left angle
ABS5638403
ABS5638503
Straight
ABS1638413
ABS1638513
SPST-NO
Wire position
Right angle
ABS4638413
ABS4638513
Left angle
ABS5638413
ABS5638513
Operating force
Max.
Au-clad triple layer
Actuator
Leaf lever
Operating force
Max.
0.88 N
1.08 N
* Agency standard: Please refer to “Ordering information”.
AECTB2E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ABS1,4,5
Au-clad double layer
SPST-NO
Wire position
Right angle
ABS4638449
ABS4638549
Operating force
Max. gf
Actuator
Straight
ABS1638449
ABS1638549
0.89 N
1.08 N
Leaf lever
Left angle
ABS5638449
ABS5638549
* Agency standard: Please refer to “Ordering information”.
SPECIFICATIONS
1. Contact rating
AgNi alloy contact type
Voltage
125 V AC
250 V AC
30 V DC
125 V DC
Resistive load
2A
2A
2A
0.4 A
Inductive load
2A
2A
2A
0.05 A
Au-clad contact type
Au-clad
Au-clad
triple layer
twin layer
Resistive load
0.1 A
—
0.1 A
—
0.1 A
0.1 A
—
—
Low-level circuit rating (Au-clad contact type)
Rated voltage
6 V DC
12 V DC
24 V DC
Resistive load
5 mA
2 mA
1 mA
Recommended contact material chart
classified by load voltage & current
(reference)
2A
Silver-alloy
100mA
Gold-clad triple layer
Gold-clad double layer
1mA
0
DC
AC
5
5
15
30V
30
250V
Remarks: If the contact is being used in the constant
low-level circuit load range, the Au-clad twin
layer contact is recommended. If there is a
danger of the current being less than 0.5 A,
for instance if the contact is being turned on
and off, the Au-clad triple layer type is
recommended.
2. Characteristics
Mechanical life
(O.T.: Specified value)
Electrical life at rated load
(O.T.: Max.)
Min. 5x105 (at 60 cpm)
Min. 5x106 (at 60 cpm)
Min. 5x104 (at 20 cpm)
Min. 2x105 (at 20 cpm)
Min. 100 MΩ (at 500 V DC insulation resistance meter)
Leaf lever
Other types
AgNi alloy contact type
Au-clad contact type
Insulation resistance
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
1,000 Vrms
1,500 Vrms
1,500 Vrms
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
Min. 294 m/s2 (Contact opening Max. 1 msec.)
AgNi alloy contact type
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Au-clad contact type
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Contact resistance (Initial)
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
Unit weight
Water resistance
0.1 to 500 mm/sec.
120 cpm
–40°C to +85°C
Approx. 2 g (IP50 type)
IP67 (Wire leads type)
3. Operating characteristics
Type of actuator
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Leaf lever
Operating force, Max.
0.98N
0.39N
0.34N
0.25N
0.34N
0.39N
0.88N
Panasonic Corporation
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.08N
Release force, Min.
0.15N
0.034N
0.029N
0.025N
0.029N
0.034N
0.17N
0.20N
0.039N
0.034N
0.029N
0.034N
0.039N
0.20N
Automation Controls Business Unit
Pretravel, Max.
mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
0.6
2.5
2.8
3.5
2.8
2.5
4.5
0.1
0.5
0.8
1.0
0.8
0.5
1.0
0.4
0.8
1.2
1.6
1.2
0.8
2.5
industrial.panasonic.com/ac/e
Operating
position,
mm
8.4±0.3
8.8±0.8
8.8±0.8
8.8±1.2
11.65±0.8
14.5±0.8
14.5±1.5
AECTB2E 201201-T
ABS1,4,5
DIMENSIONS
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://industrial.panasonic.com/ac/e
mm General tolerance: ±0.25
1. Dust protected type
1-(1) .110 quick-connect terminal
Pin plunger
CAD Data
1.7 dia.
Pretravel 0.6 max.
7.6±0.3
Operating
Position
8.4±0.3
7.7
6.7
+0.1
2.4−0.05
11.8±0.4
3.4±0.1 2.4
+0.1
11
2.4−0.05 dia.
5.5±0.1
7.1±0.15
2.5±0.1
C0.6
2.8±0.1
1.2±0.05 dia.
9.5±0.1
6.4±0.2
4
7.6±0.15
7.6±0.15
19.8±0.3
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
0.6
0.1
0.4
8.4±0.3
11.8±0.4
Short hinge lever
CAD Data
12.85
5±0.4
Pretravel 2.5 max.
R18
4
(3.7)
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
8.8±0.8
6.3
12.2±0.9
2.5
0.5
0.8
8.8±0.8
12.2±0.9
Hinge lever
CAD Data
7.15±0.4
Pretravel 2.8 max.
R20.2
4
(3.7)
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
8.8±0.8
12.2±0.9
2.8
0.8
1.2
8.8±0.8
12.2±0.9
Long hinge lever
13.1±0.4
CAD Data
Pretravel 3.5 max.
R26.1
4
(3.5)
Operating
Position
8.8±1.2
12.2±1.3
AECTB2E 201201-T
Panasonic Corporation
Automation Controls Business Unit
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
3.5
1
1.6
8.8±1.2
12.2±1.3
industrial.panasonic.com/ac/e
ABS1,4,5
mm General tolerance: ±0.25
Simulated roller lever
CAD Data
6.3±0.4
4
(3.5)
Pretravel 2.8 max.
R19.9
R2.5
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
11.65±0.8
15.05±0.9
2.8
0.8
1.2
11.65±0.8
15.05±0.9
Roller lever
CAD Data
5.15±0.4
3.2
Pretravel 2.5 max.
R18.9
5 dia.
17.9±0.9
Pretravel, Max. mm
Movement differential,
Max. mm
Overtravel, Min. mm
Distance from
mounting hole,
mm
Operating
position
Distance from
stand-off,
mm
Operating
Position
14.5±0.8
2.5
0.5
0.8
14.5±0.8
17.9±0.9
1-(2) Solder terminal
CAD Data
+0.1
2.4-0.05
2.4
1.1±0.12
3.4±0.15
7.4
+0.1
-0.05
2.4
2.4
dia.
1.5±0.12
1.85±0.2
2.5±0.1
1.9
9.5±0.1
0.5
2.8±0.2
1.25±0.1
8.7±0.15
5.2
6.4±0.2
15.4±0.15
19.8±0.3
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
1-(3) PC board terminal
Straight type
CAD Data
+0.1
2.4-0.05
1.2±0.05 dia.
2.4
1.1±0.12
3.4±0.15
8.7±0.1
15.4±0.1
7.4
+0.1
2.4-0.05 dia.
2.5±0.1
0.9
9.5±0.1
8.7±0.15
1.85±0.2
0.5
1.25±0.1
2.2
15.4±0.15
19.8±0.3
Panasonic Corporation
1.5±0.12
Automation Controls Business Unit
5.2
6.4±0.2
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
industrial.panasonic.com/ac/e
AECTB2E 201201-T
ABS1,4,5
mm General tolerance: ±0.25
Right angle type
CAD Data
3-1.5±0.05 dia.
7.62±0.1
5.08±0.2
6.4
7.62±0.15
0.5
7.62±0.15
7.62±0.1
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
Left angle type
CAD Data
3-1.5±0.05 dia.
7.62±0.1
5.08±0.2
1.3
6-C0.3
(2.8)
7.62±0.15
7.62±0.15
7.62±0.15
7.62±0.15
0.5
7.62±0.1
6.4
1.3
3.2
6.4
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
2. Immersion protected type
Wire leads
Pin plunger
Straight type
21.2
6.4
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM ...Black
N.C. ...Red
N.O. ...White
CAD Data
+0.1
2.4-0.05 dia.
9.2
COM
NO
Remarks: 1. Other dimensions are the same as those of
.110 quick-connect terminal types.
2. Dimensions of the actuator types are the
same as those of corresponding .110 quickconnect terminal types.
NC
300±10
5±2
Right angle type
Left angle type
5±2
300±10
AECTB2E 201201-T
Panasonic Corporation
Automation Controls Business Unit
5±2
300±10
industrial.panasonic.com/ac/e
ABS1,4,5
mm General tolerance: ±0.25
Leaf lever
Straight type
CAD Data
5
7.6±0.3
8±1
Pretravel 4.5 max.
1.5
Free Position
(16.5)
Operating Position
14.5±1.5
7.7
Totaltravel Position
(10.5 min.)
+0.1
8.4
2.5±0.1
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM ...Black
N.C. ...Red
N.O. ...White
8.4
2.4-0.05 dia.
6.4
300±10
5±2
23.8±0.4
Right angle type
Left angle type
5
5
6.4
6.4
5±2
5±2
300±10
Panasonic Corporation
Automation Controls Business Unit
300±10
industrial.panasonic.com/ac/e
AECTB2E 201201-T
Similar pages