Kingbright AP23SRC-F-F01 3x2.4mm smd chip led lamp Datasheet

3x2.4mm SMD CHIP LED LAMP
AP23SRC/F-F01
SUPER BRIGHT RED
Features
z3mmx2.4mm SMT LED, 1.05mm THICKNESS.
Description
zLOW POWER CONSUMPTION.
The Super Bright Red source color devices are made with
zWIDE VIEWING ANGLE.
Gallium Aluminum Arsenide Red Light Emitting Diode.
zIDEAL FOR BACKLIGHT AND INDICATOR.
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAF1211
REV NO: V.1
DATE: MAR/17/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203000245-01
Selection Guide
Part No.
Dice
AP23SRC/F-F01
Iv (mcd)
@ 20mA
Lens Type
SUPER BRIGHT RED (GaAlAs)
Viewing
Angle
Min.
Typ.
2 θ 1/2
36
100
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Red
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
660
nm
IF=20mA
Super Bright Red
640
nm
IF=20mA
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
100
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
-40°C To +85°C
Operating/Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF1211
REV NO: V.1
DATE: MAR/17/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203000245-01
Super Bright Red
AP23SRC/F-F01
SPEC NO: DSAF1211
REV NO: V.1
DATE: MAR/17/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203000245-01
AP23SRC/F-F01
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF1211
REV NO: V.1
DATE: MAR/17/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203000245-01
Similar pages