SEMTECH DF005M Miniature glass passivated single-phase-bridge rectifier Datasheet

DF005M THRU DF10M
MINIATURE GLASS PASSIVATED SINGLE-PHASE-BRIDGE RECTIFIERS
Features
• Plastic package used has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated chip junctions
• Surge overload rating of 50 Amperes peak
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260 OC/10 seconds at 5 Ibs. (2.3Kg) tension
Mechanical Darta
• Case: Molded plastic body over passivated junctions
• Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
• Polarity: Polarity symbols marked on body
• Mounting Position: Any
Absolute Maximum Ratings and Characteristics
Ratings at 25 OC ambient temperature unless otherwise specified.
Symbols
Parameter
DF
DF
DF
DF
DF
DF
DF
005M
01M
02M
04M
06M
08M
10M
Unit
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Maximum Average Forward Output Rectified
IF(AV)
Current at TA = 40 OC 2)
Peak Forward Surge Current Single Sine-wave
Superimposed on Rated Load (JEDEC Method)
IFSM
Maximum Forward Voltage Drop Per Leg at 1 A
VF
Maximum Reverse Current
TA = 25 C
at Rated DC Blocking Voltage Per Leg
TA = 125 C
O
O
IR
1
A
50
A
1.1
V
5
µA
500
Rating for Fusing (t < 8.35 ms)
I2 t
10
A2sec
Typical Junction Capacitance Per Leg 1)
CJ
25
pF
RθJA
40
RθJL
15
TJ ,TS
-55 to +150
Typical Thermal Resistance Per Leg 2)
Operating junction and storage temperature range
1)
2)
C/W
O
C
O
Measured at 1MHZ and applied reverse voltage of 4 Volts
Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B .with 0.5 X 0.5" (13
X 13 mm) copper pads.
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, a company
listed on the Hong Kong Stock Exchange, Stock Code: 724)
R
Dated : 25/04/2006 H
DF 005M THRU DF 10M
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
1.0
60Hz
RESISTIVE OR
INDUCTIVE LOAD
0.5
P.C.B MOUNTED ON
0.51X0.51"(13X13mm)
COPPER PADS WITH
0.06"(1.5mm) LEAD LENGTH
0
20
40
60
80
100
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT
60
T J =150 oC
SINGLE SINE-WAVE
(JEDEC Method)
50
40
30
1.0 CYCLE
20
10
0
100
10
1
120
140 150
NUMBER OF CYCLES AT 60 Hz
AMBIENT TEMPERATURE, oC
FIG.4-TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
10
1
T J =25 oC
PULSE WIDTH=300 s
1% DUTY CYCLE
0.1
100
INSTANTANEOUS REVERSE CURRENT,
AMPERES
FIG.3-TYPICAL FORWARD CHARACTERISTICS
PER LEG
T J =25 oC
10
1
0.1
T J =25 oC
0.01
0.4
0.6
0.8
1.0
1.2
1.4
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
0.01
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE
VOLTAGE,%
FIG.6-TYPICAL TRANSIENT THERMAL
IMPEDANCE
FIG.5-TYPICAL JUNCTION
CAPACITANCE PER LEG
T J =25 oC
f=1.0MHz
Vsig=50mV P-P
JUNCTION CAPACITANCE, pF
JUNCTION CAPACITANCE, pF
100
10
100
10
1
0.1
0.1
0.01
1
1
10
1
10
100
100
REVERSE VOLTAGE, VOLTS
1, HEATING TIME, sec.
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, a company
listed on the Hong Kong Stock Exchange, Stock Code: 724)
R
Dated : 25/04/2006 H
Similar pages