HITRON HMI19-D050M Universal input ac-dc medical application open frame single & multi-output 19-20 watts internal switching power supply Datasheet

H HiTRON
UNIVERSAL INPUT AC-DC MEDICAL APPLICATION OPEN FRAME
SINGLE & MULTI-OUTPUT 19-20 WATTS INTERNAL SWITCHING
POWER SUPPLIES HMI19 SERIES
FEATURES:
„ ACCOMMODATE UNIVERSAL AC SOURCES
„ MEET MEDICAL STANDARD EN 60601-1/
UL 2601-1
„ EMI MEET EN 55011 & FCC CLASS B
„ CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: 90-264Vac typical.
Input Connector: Molex 5273 or equivalent.
Input Frequency: 47-63Hz.
Inrush Current: 16A @ 230Vac.
Input Current: 0.4A@115Vac & 0.22A@230Vac.
Dielectric Withstand: Meet IEC 60601-1.
EMI: Meet EN55011 & FCC Class B.
Hold-up Time: Typ. 14mS @ 115Vac.
Typ. 70mS @ 230Vac.
Earth Leakage: Less than 0.10 mA.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 19-20W.
Output Connector: Molex 5273 or 41671.
Line Regulation: Typ. 0.2-1.0%.
Load Regulation: Main VO1 typ. ±1.0%.
Aux. VO2 typ. ±2-3.0%(Stacked).
Aux. VO3 typ. ±1-2.0%(P.R.).
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in at main output VO1.
Adjustability: Factory set.
Over Load Protection (OLP):
Fully protected against overload or short circuit.
Typ. 120-150% max. load.
Consult the factory for special OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 73%.
Switching Frequency: Typ. 67K Hz.
Circuit Topology: Fixed-frequency Flyback Circuit.
Transient Response: Output voltage returns in
less than 0.2mS following a 25% load change.
Safety standard: Meet Medical standards UL2601-1/
EN 60601-1 Class I.
Operating Temperature: 0 to +50°C.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.04% /°C.
Cooling: Free air convection.
Construction: L-Bracket open frame format.
Power Density: 3.3 Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-9-
OUTPUT VOLTAGE/CURRENT RATINGS CHART
SINGLE OUTPUT
DUAL OUTPUT
MAIN VO1@★
MODEL NO.
Typ.
Volt.
Max.
HMI19-S033050
5.0A
+3.3V
6.0A
HMI19-S050043
4.3A
+5.0V
HMI19-S120017
1.7A
HMI19-S240009
0.9A
MAIN VO1@★
MODEL NO.
AUX. VO2 † or ●
Typ.
Volt,
Max.
Typ. Volt. Max.
Pk.
HMI19-D033I
4.0A
+3.3V
5.0A
0.3A +12V 0.6A
1A
5.0A
HMI19-D033M
4.0A
+3.3V
5.0A
0.3A +24V 0.5A
1A
+12.0V
2.0A
HMI19-D050M
4.0A
+5.0V
5.0A
0.3A +24V 0.5A
1A
+24.0V
1.0A
HMI19-D050I
4.0A
+5.0V
5.0A
0.3A +12V 0.6A
1A
TRIPLE OUTPUT
MAIN VO1@★
MODEL NO.
AUX. VO2 †
AUX. VO3 ●
Typ.
Volt.
Max.
Typ.
Max.
Pk.
Typ.
Max.
Pk.
HMI19-T033II
4.0A
+3.3V
5.0A
0.5A +12V 1.0A
2A
0.3A +12V 0.6A
1A
HMI19-T033MI
4.0A
+3.3V
5.0A
0.3A +24V 0.5A
1A
0.3A +12V 0.6A
1A
HMI19-T050II
3.0A
+5.0V
4.0A
0.5A +12V 1.0A
2A
0.3A +12V 0.6A
1A
HMI19-T050MI
3.0A
+5.0V
4.0A
0.3A +24V 0.5A
1A
0.3A +12V 0.6A
1A
HMI19-T050KK
3.0A
+5.0V
4.0A
0.4A +15V 0.8A
1A
0.3A
1A
Symbol: "★" OVP built-in.
"@" Adjustable.
Volt.
"●" Installed with Post Regulator (P.R.).
Volt.
-15V
0.6A
"†" Stacked-on main O/P.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 373.0g (13.2 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
SINGLE OUTPUT
DUAL OUTPUT
DC
N/A
VO1
VO2
N/A
COM.
P1-L
P1-N P1-G
P2-2
P2-3,4
P2-1
P2-2
P2-4
P2-3
CNTR & PIN #
Mating connector: P1: Molex 5195 or 5239 series. P2: Molex 5195 or 5239 series/ 3069 series.
ASSIGNMENT
AC-L
AC-N
AC-G
VO1
-10-
TRIPLE OUTPUT
DC
COM.
P2-1
VO1
VO2
VO3
P2-2
P2-3
P2-4
DC
COM.
P2-1
Similar pages