DATA SHEET AS195-306, AS195-306LF: PHEMT GaAs IC High-Power SP5T Switch 0.1–2 GHz Pin Out ANT CBL Description NEW V2 GND CBL J4 CBL J3 The AS195-306 is a reflective SP5T switch. It is an ideal switch for higher power applications. It can be used for GSM dual-band handset applications where low loss, low current and small size are critical parameters. J5 GND GND J2 CBL V1 V4 J1 CBL V5 GND CBL GND 5 symmetric RF paths ● Positive voltage control ● High IP3 ● Excellent harmonic performance ● Handles GSM power levels ● Available in QFN-16 (4 x 4 mm) package ● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 ● V3 Features DC blocking capacitors (CBL) must be supplied externally. CBL = 47 pF for operating frequency >500 MHz. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 °C (0, 3 V) ZO = 50 Ω, unless otherwise noted Parameter Frequency Insertion loss Ant-J1, J2, J3, J4, J5 0.1–0.5 GHz 0.5–1.0 GHz 1.0–2.0 GHz Isolation Ant-J1, J2, J3, J4, J5 0.1–0.5 GHz 0.5–1.0 GHz 1.0–2.0 GHz VSWR 0.1–1.0 GHz 1.0–2.0 GHz Min. 30 25 21 Typ. Max. Unit 0.5 0.6 1.0 0.7 0.8 1.1 dB dB dB 35 27 23 dB dB dB 1.4:1 1.6:1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200187 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 30, 2007 1 DATA SHEET • AS195-306, AS195-306LF Operating Characteristics at 25 °C (0, 3 V) ZO = 50 Ω, unless otherwise noted Parameter Condition Frequency Min. Typ. Max. Unit Switching characteristics Rise, fall On, off Video feedthru 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz 50 100 50 ns ns mV IP3 13 dBm/tone 55 dBm 2nd and 3rd harmonics 34 dBm input 900 MHz -65 dBc 25 °C/W Thermal resistance Control voltages VLOW = 0 VHIGH = 3 V @ 200 µA max. Typical Performance Data 0 0 -0.2 -5 J5 -10 J4 -0.4 J3 -15 J1 -0.6 Isolation (dB) Insertion Loss (dB) ZO = 50 Ω, unless otherwise noted J2 -0.8 -1.0 -1.2 -20 -25 J4 -30 -35 J2 -40 -1.4 -45 -1.6 -50 0 0.5 1.0 1.5 2.0 2.5 J1 0 0.5 1.0 1.5 2.0 Frequency (GHz) Typical Loss (All Paths) vs. Frequency Typical Isolation (All Paths) vs. Frequency 1.9 1.8 1.7 J5 1.6 VSWR 2.5 Frequency (GHz) 2.0 1.5 1.4 J4 1.3 J3 1.2 J2 1.1 J1 1.0 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) VSWR vs. Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 J5 J3 April 30, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200187 Rev. C DATA SHEET • AS195-306, AS195-306LF Absolute Maximum Ratings QFN-16 (4 x 4 mm) Characteristic Value RF Input Power 0.039 (1.00 mm) Max. 36 dBm, f > 500 MHz, 27 dBm < 500 MHz, 0/8 V control 100 mW f <= 500 MHz Control Voltage 16 0.001 (0.025 mm) 0.157 (4.00 mm) Sq. BSC 1 Pin 1 Indicator -0.2 V, +8 V Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Seating Plane Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. 0.15 (2.10 mm) 0.006 (0.083 mm) 0.083 (2.10 mm) 0.024 (0.60 mm) + 0.006 (0.15 mm) - 0.004 (0.10 mm) 0.011 (0.28 mm) + 0.003 (0.07 mm) - 0.002 (0.05 mm) 0.078 (1.95 mm) Ref. 4 x 0.016 (0.40 mm) 0.026 (0.65 mm) BSC 0.078 (1.95 mm) Ref. Truth Table V1 V2 V3 V4 V5 Ant-J1 Ant-J2 Ant-J3 Ant-J4 Ant-J5 VHIGH 0 0 0 0 Ins. loss Isol. Isol. Isol. Isol. 0 VHIGH 0 0 0 Isol. Ins. loss Isol. Isol. Isol. 0 0 VHIGH 0 0 Isol. Isol. Ins. loss Isol. Isol. 0 0 0 VHIGH 0 Isol. Isol. Isol. Ins. loss Isol. 0 0 0 0 VHIGH Isol. Isol. Isol. Isol. Ins. loss All other conditions not recommended. “0” = 0 to 0.2 V. “VHIGH” = 2.7 to 5 V. Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200187 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 30, 2007 3 DATA SHEET • AS195-306, AS195-306LF Copyright © 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 April 30, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200187 Rev. C