Kingbright AA3535SYL1Z1S 3.5x3.5 mm smd chip led lamp Datasheet

3.5x3.5 mm SMD CHIP LED LAMP
Part Number: AA3535SYL1Z1S
Super Bright Yellow
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
The source color devices are made with AlGaInP Light
Features
z White SMD package, silicone resin.
z Low thermal resistance.
z Compatible with IR-reflow processes.
z ESD protection.
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z RoHS compliant.
grounded.
Applications
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. steps, exit ways, etc).
z Decorative and entertainment lighting.
z Commercial and residential lighting.
z Automotive interior lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ4025
REV NO: V.4
DATE: SEP/24/2010
PAGE: 1 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.H.Wu
ERP: 1201004888
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAJ4025
REV NO: V.4
DATE: SEP/24/2010
PAGE: 2 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.H.Wu
ERP: 1201004888
Selection Guide
Dice
Part No.
AA3535SYL1Z1S
Iv (cd) [2]
@ 150mA
Lens Type
Super Bright Yellow(AlGaInP)
Φv (lm) [2]
@ 150mA
Viewing
Angle [1]
Min.
Typ.
Min.
Typ.
2 θ 1/2
2.8
4
6
8
120 °
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power Dissipation
PD
525
mW
Junction Temperature [1]
TJ
130
°C
Operating Temperature
Top
-40 To +85
°C
Storage Temperature
Tstg
-40 To +85
°C
DC Forward Current [1]
IF
150
mA
Reverse Voltage
VR
5
V
Peak Forward Current [2]
IFM
270
mA
Thermal Resistance [1]
(Junction/ambient)
Rth j-a
178
°C/W
Thermal Resistance [1]
(Junction/solder point)
Rth j-S
78
°C/W
8000
V
Electrostatic Discharge Threshold (HBM)
Notes:
1.Results from mounting on PC board FR4(pad size ≥ 70mm 2 ), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Wavelength at peak emission
Dominant Wavelength
IF=150mA
IF=150mA
[Typ.]
[Typ.]
Spectral Line Half-width IF=150mA [Typ.]
Symbol
Value
Unit
λ peak
590
nm
λ dom [1]
590
nm
Δλ
20
nm
Forward Voltage IF=150mA [Min.]
Forward Voltage IF=150mA [Typ.]
2.5
VF [2]
Forward Voltage IF=150mA [Max.]
3.0
V
3.5
Reverse Current (VR = 5V) [Max.]
IR
10
uA
Temperature coefficient of λ peak
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
TC λ peak
0.13
nm/ ° C
Temperature coefficient of λ dom
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
TC λ dom
0.10
nm/ ° C
Temperature coefficient of VF
IF=150mA, -10 ° C≤ T≤100 ° C [Typ.]
TCV
-3.3
mV/ ° C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAJ4025
REV NO: V.4
DATE: SEP/24/2010
PAGE: 3 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.H.Wu
ERP: 1201004888
Super Bright Yellow
AA3535SYL1Z1S
SPEC NO: DSAJ4025
REV NO: V.4
DATE: SEP/24/2010
PAGE: 4 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.H.Wu
ERP: 1201004888
AA3535SYL1Z1S
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAJ4025
REV NO: V.4
DATE: SEP/24/2010
PAGE: 5 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.H.Wu
ERP: 1201004888
PACKING & LABEL SPECIFICATIONS
AA3535SYL1Z1S
SPEC NO: DSAJ4025
REV NO: V.4
DATE: SEP/24/2010
PAGE: 6 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.H.Wu
ERP: 1201004888
Similar pages