PR6001 - PR6005 6.0A FAST RECOVERY RECTIFIER Features · · · · · · Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 300A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 A C D Mechanical Data · · · · · A B R-6 Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 2.1 grams (approx.) Dim Min A 25.40 Max ¾ B 8.60 9.10 C 1.20 1.30 D 8.60 9.10 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 60°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Symbol PR 6001 PR 6002 PR 6003 PR 6004 PR 6005 Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 6.0 A IFSM 300 A @ IF = 6.0A VFM 1.2 V @ TA = 25°C @ TA = 125°C IRM 10 150 mA Reverse Recovery Time (Note 3) trr 150 250 ns Typical Junction Capacitance (Note 2) Cj 140 70 pF Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: RqJA 32 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0 V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25 A. See figure 5. DS26007 Rev. A1-2 1 of 2 PR6001 - PR6005 IFsm, PEAK FORWARD SURGE CURRENT (A) I(AV), AVERAGE FORWARD CURRENT 8 6 4 2 0 0 25 50 75 100 125 150 175 600 8.3ms Single Half Sine-Wave JEDEC Method 500 400 300 200 100 0 1 100 NUMBER OF CYCLES AT 60Hz Fig. 2 Max Non-Repetitive Peak Surge Current 1000 1000 100 Cj, CAPACITANCE (pF) IF, INSTANTANEOUS FORWARD CURRENT (A) TA, AMBIENT TEMPERATURE (°C) Fig. 1, Typical Forward Current Derating Curve 10 10 1 PR6001 - PR6004 100 PR6005 10 TJ = 25°C Pulse Width = 300µs 1% Duty Cycle 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.0 2.0 Tj = 25°C f = 1.0MHz 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 3, Typical Instantaneous Forward Characteristics 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 50Ω NI (Non-inductive) Device Under Test (+) (-) +0.5A 10Ω NI (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS26007 Rev. A1-2 2 of 2 PR6001 - PR6005