PR1501G/S - PR1507G/S 1.5A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 50A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A A DO-41 Mechanical Data · · · · · · C D Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number DO-41 Weight: 0.35 grams (approx.) DO-15 Weight: 0.40 grams (approx.) Dim Min A B C DO-15 Max Min 25.40 ¾ 25.40 ¾ 4.06 5.21 5.50 7.62 0.71 0.864 0.686 0.889 2.00 2.72 2.60 3.60 D Max All Dimensions in mm “GS” Suffix Designates DO-41 Package “G” Suffix Designates DO-15 Package Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PR1502 PR1503 PR1504 PR1505 PR1506 PR1507 Unit Symbol PR1501 G/GS G/GS G/GS G/GS G/GS G/GS G/GS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TA = 55°C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.5A @ TA = 25°C @ TA = 100°C VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.5 A IFSM 50 A VFM 1.3 V IRM 5.0 200 mA Reverse Recovery Time (Note 3) trr Typical Junction Capacitance (Note 2) Cj Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 150 250 500 ns 25 pF RqJA 65 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.2 5A. See figure 5. DS27004 Rev. B-2 1 of 2 PR1501G/S - PR1507G/S IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FWD RECTIFIED CURRENT (A) 2.0 1.6 1.2 0.8 0.4 Single phase half-wave 60Hz resistive or inductive load 0 25 50 75 100 125 150 175 200 10 1.0 0.1 0.01 0.6 0.8 1.0 60 100 40 20 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC Method) 0 1 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve Tj = 25°C Pulse width = 300µs Tj = 25°C f = 1.0MHz 10 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27004 Rev. B-2 2 of 2 PR1501G/S - PR1507G/S