Cooper BB1P100M57 Compact modular fuse holders with the industrys best rating Datasheet

Compact Modular Fuse Holders With the
Industry’s Best Ratings
Products for PV, IEC and UL Applications
Protection
made simple
™
Compact DIN-Rail Mountable Fuse Holders
Cooper Bussmann CH Series finger-safe modular fuse holders offer a set
of advantages you can’t find anywhere else.
Best Ratings
With a wide wire range and industry leading ratings - up to 32A, 1000V, 200kA
SCCR – the new CH Series provides worldwide acceptance and easy specification
– including the latest PV fuse holder standard (UL 4248-18)
Smallest Footprint
The CH Series conserves valuable panel space. Up to 10 percent smaller than the
competition.
Ease of Use
Easy to identify and specify, product color coding shows PV, IEC and UL holders at
a glance. Optional factory-installed neutral pole and open fuse indication speeds
troubleshooting.
Accessories Provide Greater Flexibility
Save time and money by reducing wiring and components. Advanced comb-bus
bar and PLC communication accessories expand design possibilities while
delivering superior performance.
™
Service
In stock for QuikShip Everyday Service - 90% of our orders ship within 24 hours.
QuikShip Emergency Service ensures you’re covered 24/7, 365 with “Next flight
out” courier service.
Modular Fuse Holder Specifications and Selection Guide
Features and Benefits
• High SCCR rated, UL Listed Class CC holder with
indicator option for 600Vac/dc and 48Vdc.
• UL Recognized midget and 10 x 38 holders with
factory assembled neutral pole option.
• Agency ratings up to 1000Vdc for use with solar PV fuses.
• Available remote PLC indication with the CH-PLC
module.
• Rated for use with 75ºC or 90ºC wire, fine stranded
wire, spade terminals and comb-bus bars. Use any
higher temperature rated wire with appropriate derating.
• Complete range of UL Listed and high SCCR rated
1-phase and 3-phase finger-safe comb-bus bars
and power feed lugs.
Specifications
Agency Information: UL File E14853
Guide IZLT Listed, IZLT2 Recognized
CSA: File 47235, CHPV and CHM - Class 6225-30, CHCC - Class 6225-01
Ratings:
600V/30A (UL)
690V/32A (IEC)
Wire Range:
#18 to #4 (0.8mm2 to 21.1mm2)
Torque Ratings:
30 Lb-In (3.4 N•m) maximum
Flammability Ratings:
UL 94V0, self-extinguishing
Storage & Operating Temperature Range:
-20ºC to +90ºC (indicating)
-20ºC to +120ºC (non-indicating)
Series &
Size
CHM
10x38
and
Midget
Catalog Number
With
Without
Indicator
Indicator
CHM1DIU
CHM1DU
CHM2DIU
CHM2DU
CHM3DIU
CHM3DU
CHM4DIU
CHM4DU
CHM1DNIU
CHM3DNIU
CHM1DNU
CHM1DNXU
CHPV1U
CHPV2IU
CHPV2U
Agency
Markings
UR; IEC
60269-2;
CSA; CCC
IEC
60269-2
Number Terminal SCCR Cooper Bussmann
of Poles Rating
Fuses
Rating
1
2
3
4
FNQ, KLM, FNM,
1 pole + 1 Solid,
KTK, BAF, FWA,
200kA
neutral Stranded,
rms sym DCM, C10 SERIES,
Fine
3 poles +
AGU, BAN, FWC
1 neutral Stranded,
Spade
Lug, Comb
1
Bus Bar;
Single and
IEC 690V/32A
IEC60269-2
1 neutral Dual Wire;
UL; CSA;
1
75ºC and
UL & IEC;
90ºC Cu
UL4248-18;
1000Vdc/30A
2
wire
IEC60269-1; CCC
UL 48Vdc/30A;
IEC
48Vdc/32A
CHPV1IU
CHCC1DIU
CHCC CHCC2DIU
Class CC CHCC3DIU
UL
600V/30A;
IEC
690V/32A
CHM3DNU
CHM1DI-48U
CHPV
Voltage &
Current
CHCC1DU
UL 600V/30A
CHCC2DU
CHCC3DU
CHCC1DI-48U UL 48Vdc/30A
UR; IEC
60269-2;
CSA; CCC
UL; CSA;
CCC
1
2
3
1
n/a
n/a
33kA
Solar PV series
200kA
rms sym
LP-CC, FNQ-R,
KTK-R
Modular Fuse Holder Features and Installation Guide
Features
Multi-Pole Ganging
Hole for Wire
Security Tag
Use multi-pole connection kit part number
JV-L to gang multiple poles together. One
JV-L kit is sufficient to gang up to 4 poles.
Optional
Open Fuse
Indicator
Label Slot
Self-Extinguishing,
UL 94V0 Rated
Polyester
Material
4mm
Lockout
Feature in
Fuse Carrier
Captive, Fully
Backed Out
Phil-Slot Screw
Spade lug
connection
6mm Wire
Clamp Lug and
open bus bar
connection
(#4 to #18)
Toolless
Ganging of
Multiple
Poles
Toolless DIN Rail
Mounting
Wire Strip
Length
Indicator
70
[ 2.756 ]
Dimensional Data - mm (in)
52.5
[ 2.067 ]
35
[ 1.378 ]
61.83
[ 2.434 ]
17.5
[ 0.689 ]
73.88
[ 2.909 ]
18.59
[ 0.732 ]
42.58
[ 1.676 ]
52.83
[ 2.080 ]
83.19
[ 3.275 ]
1. Press down on top
of DIN-Rail
9
[ 0.354 ]
Removing Instructions
7.5
[ 0.295 ]
2. Rotate out
on the bottom
Product Design and Label Specifications
CHPV & CHPVI (PV Applications)
CHM & CHMI
Series: CHM
Series: CHPV
USE PHOTOVOLTAIC 10X38 FUSE
75ºC OR 90ºC CU WIRE
DO NOT OPEN UNDER LOAD
Conductor
No. of
Type
Conductors
Wire Range
18-14 AWG
(0.8-2.0mm2)
18-16 AWG
(0.8-1.3mm2)
14-10 AWG
(2.0-5.2mm2)
12-10 AWG
(3.3-5.2mm2)
Stranded,
8-4 AWG
Fine
(8.3-21.1mm2)
Stranded
18-14 AWG
Spade
(0.8-2.0mm2) Terminal
N/A
Conductor
No. of
Type
Conductors
Wire Range
Torque
Dual
USE MIDGET / 10X38 FUSE
75ºC OR 90ºC CU WIRE
DO NOT OPEN UNDER LOAD
10X38
30A
5
18-14 AWG
(0.8-2.0mm2)
18-16 AWG
(0.8-1.3mm2)
14-10 AWG
(2.0-5.2mm2)
12-10 AWG
(3.3-5.2mm2)
20 in-lbs
2.3 Nm
25 in-lbs
2.8 Nm
Single
Solid,
Stranded
PV
1000V
Comb Bus
Solid,
Stranded
Dual
18-14 AWG
(0.8-2.0mm2)
Stranded,
Fine
Stranded
Spade
Terminal
N/A
Comb Bus
8-4 AWG
(8.3-21.1mm2)
30 in-lbs
3.4 Nm
Single
Torque
Midget
690V
20 in-lbs
2.3 Nm
25 in-lbs
2.8 Nm
Single
10X38
32A
4
30 in-lbs
3.4 Nm
Single
Rated: 600V, 30A 50/60Hz
200kA RMS SYM 3W
Indication Min Voltage: 90V
IEC: 60269-2 32A
690Vac 120kA 3W
Degree of Protection IP20
UL4248-18
Rated: 1000Vdc, 30A 33kA RMS SYM
Indication Min Voltage: 90V
IEC: 60269-1 32A
1000Vdc 33kA 3.5W
Degree of Protection IP20
R
R
4GY1
GB13539
GB13539
MADE IN
CHINA
MADE IN
CHINA
4
5
CHCC & CHCCI (UL Applications)
CHCCI-48
Series: CHCC
Series: CHCC
USE CLASS CC FUSE
75ºC OR 90ºC CU WIRE
DO NOT OPEN UNDER LOAD
Conductor
No. of
Type
Conductors
Wire Range
18-14 AWG
(0.8-2.0mm2)
18-16 AWG
(0.8-1.3mm2)
14-10 AWG
(2.0-5.2mm2)
12-10 AWG
(3.3-5.2mm2)
Stranded,
8-4 AWG
Fine
(8.3-21.1mm2)
Stranded
18-14 AWG
Spade
(0.8-2.0mm2) Terminal
N/A
Dual
USE CLASS CC FUSE
75ºC OR 90ºC CU WIRE
DO NOT OPEN UNDER LOAD
Class CC
48Vdc
30A
Torque
Conductor
No. of
Type
Conductors
Wire Range
20 in-lbs
2.3 Nm
25 in-lbs
2.8 Nm
Single
Solid,
Stranded
Class CC
600V
0
18-14 AWG
(0.8-2.0mm2)
18-16 AWG
(0.8-1.3mm2)
14-10 AWG
(2.0-5.2mm2)
12-10 AWG
(3.3-5.2mm2)
30 in-lbs
3.4 Nm
Solid,
Stranded
Dual
Stranded,
8-4 AWG
Fine
(8.3-21.1mm2)
Stranded
18-14 AWG
Spade
(0.8-2.0mm2) Terminal
Single
N/A
Comb Bus
Rated: 600V, 30A 50/60Hz
200kA RMS SYM
Indication Min Voltage: 90V
Degree of Protection IP20
0
20 in-lbs
2.3 Nm
25 in-lbs
2.8 Nm
Single
30A
Torque
30 in-lbs
3.4 Nm
Single
Comb Bus
Rated: 48Vdc, 30A
200kA RMS SYM
Indication Min Voltage: 15V
Degree of Protection IP20
GB13539
GB13539
430P
430P
MADE IN
CHINA
MADE IN
CHINA
1
0
CHMI-48
CHMDNX (IEC Applications)
N
Series: CHM
Series: CHM
75ºC OR 90ºC CU WIRE
DO NOT OPEN UNDER LOAD
Wire Range
18-12 AWG
(0.8-4.0mm2)
10 AWG
(5.0mm2)
18-16 AWG
(0.8-1.3mm2)
14-10 AWG
(0.8-5.0mm2)
Conductor
No. of
Type
Conductors
Single
Solid,
Stranded
Torque
25 in-lbs
2.8 Nm
Single
10X38
USE MIDGET / 10X38 FUSE
75ºC OR 90ºC CU WIRE
DO NOT OPEN UNDER LOAD
Wire Range
3
20 in-lbs
2.3 Nm
Dual
Stranded,
8-4 AWG
Fine
(8.4-21.1mm2)
Stranded
18-14 AWG
Spade
(0.8-2.0mm2) Terminal
N/A
SOLID LINK
30 in-lbs
3.4 Nm
18-14 AWG
(0.8-2.0mm2)
18-16 AWG
(0.8-1.3mm2)
14-10 AWG
(2.0-5.2mm2)
12-10 AWG
(3.3-5.2mm2)
Comb Bus
Single
Solid,
Stranded
18-14 AWG
(0.8-2.0mm2)
Stranded,
Fine
Stranded
Spade
Terminal
N/A
Comb Bus
8-4 AWG
(8.3-21.1mm2)
IEC: 60269-2
Degree of Protection IP20
SOLID LINK 690V-32A
Conductor
No. of
Type
Conductors
Dual
Midget
48V
20 in-lbs
2.3 Nm
25 in-lbs
2.8 Nm
30 in-lbs
3.4 Nm
Single
Rated: 48Vdc, 30A
200kA RMS SYM 3W
Indication Min Voltage: 15V
IEC: 60269-2 32A
48Vdc 120kA 3W
Degree of Protection IP20
R
GB13539
N
MADE IN
CHINA
3
10X38
32A
Torque
MADE IN
CHINA
2
2
Remote Fuse Monitoring Accessory CH-PLC
Make it Simple with
Cooper Bussmann resettable
three-phase remote fuse monitor
that integrates with a
Programmable Logic Controller
(PLC) or other monitoring and
control equipment.
Specifications:
• Power Input: 24Vdc / 5mA
• Sensing Voltage: 600V/30mA
• Output Signals: Digital 0Vdc (Low), 24Vdc (High)
- 0Vdc Low – Fuse is good
- 24Vdc High – Fuse has opened
When the fuse opens, the output signal is sent high and will
remain high until the unit is reset
• Rated Impulse Voltage: 8kV
• Local Indication: Two distinct LEDs indicate unit power (green)
and open fuse (red). Upon the replacement of the fuse, the
actuation of the reset switch will reset the open
fuse LED
• Flammability Rating: UL 94V0
Wiring:
• For power, signal and ground connections use 22-24AWG
(0.25mm2) 300V rated wire
Emissions and Immunity Testing:
• Electrostatic Discharge IEC 61000-4-2
• Electrical Fast Transient/Burst IEC 6100-4-4
• Surge Immunity IEC61000-4-5
Packaging:
• The CH-PLC is packaged individually
• A single unit monitors up to three phases
• Package includes 0.11” (2.8mm) quick connects for power, signal
and ground connections
Minimum Circuit Voltage:
• Minimum circuit voltage required across the CH holder is 100Vac
for the remote indication device to operate
Installation Technique:
• Mounts on the left side of the fuse holder and mechanically
interlocks with the fuse holder switch handle with hardware
provided
IP20 Rating: Yes
Environmental Data:
• Storage and Operating Temperature: -20°C to 75°C
Agency Information:
• UL 508
• cULus to CSA Standard 22.2 No.14
PLC Programming:
• The CH-PLC signal line is designed to provide a digital input to a
PLC I/O card.
• Programmable Logic Control program must be written to properly
interpret the input signal to the PLC.
• The PLC program should check for consecutive high signals
before taking action on a critical process.
De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures.
Comb-Bus Bar Specifications and Selection Guide
Features and Benefits
• Easily distribute power in single-phase or
three-phase configurations
• Flexible cut-to-length solutions without
compromising on the product’s finger-safe
features
• 100kA SCCR (Short Circuit Current Rating) when
protected by a 200A Class J fuse
• Single-phase bus bars rated to 1000Vdc and
100A in end-fed configuration (200A for
center-fed configuration)
• Three-phase bus bars rated to 600Vac/dc and
100A in end-fed configuration (200A for
center-fed configuration)
• Power feed terminals for single-phase and
three-phase service
Specifications
Agency Information: UL508, File E195399
Pitch: 17.8mm
SCCR: 10kA (default)
100kA (with upstream Class J 200A fuses)
Max Current: 100A (power feed from end;
200A (power feed from center)
Max Voltage: 600Vac/dc (three phase)
1000Vdc/600Vac (single phase)
Selection Guide
Part Number
BB1P100M3
BB1P100M6
BB1P100M9
BB1P100M12
BB1P100M15
BB1P100M57
BB3P100M6
BB3P100M9
BB3P100M12
BB3P100M15
BB3P100M57
ECAP1P
ECAPMP
PWR35MM
FSCVR
PWR1PLP
PWR50MM
Description
Single-phase 1000Vdc busbar, 100A, 3 pins, assembled endcap
Single-phase 1000Vdc busbar, 100A, 6 pins, assembled endcap
Single-phase 1000Vdc busbar, 100A, 9 pins, assembled endcap
Single-phase 1000Vdc busbar, 100A, 12 pins, assembled endcap
Single-phase 1000Vdc busbar, 100A, 15 pins, assembled endcap
Single-phase 1000Vdc cuttable busbar, 100A, 57 pins, without endcap
Three-phase 600V busbar, 100A, 6 pins, assembled endcap
Three-phase 600V busbar, 100A, 9 pins, assembled endcap
Three-phase 600V busbar, 100A, 12 pins, assembled endcap
Three-phase 600V busbar, 100A, 15 pins, assembled endcap
Three-phase 600V cuttable busbar, 100A, 57 pins, without endcap
Single-phase busbar endcap
Three-phase busbar endcap
35mm2 feeder terminal for three-phase busbar (115A, 1000Vac/dc)
Spare contact safety protection covers
Single-phase low-profile feeder terminal (115A, 1000Vac/dc)
50mm2 direct feed terminal (1000Vac/dc)
Comb-bus Bar Features and Installation Guide
Typical Installation Example
Power Feed Terminals
Comb-Bus Bar
Modular Fuse Holders
Typical Dimensional Data
Three-phase
ECAP1P
PWR35MM
Single-phase
ECAPMP
PWR50MM
FSCVR
PWR1PLP
CH Series Modular Fuse Holder Specifications
PV
UL
Class J 30A
IEC
8x32 IEC
14x51 IEC
22x58 IEC
Catalog Numbers
Without
Indication
With*
Indication
CH081D
CH081DNX
CH081DNS
CH081DN
CH082D
CH083D
CH083DNS
CH083DN
CH084D
CH081DI
CH081DNSI
CH081DNI
CH082DI
CH083DI
CH083DNSI
CH083DNI
CH084DI
CHM1DU
CHM2DU
CHM3DU
CHM4DU
CHM1DNU
CHM3DNU
CHM1DIU
CHM2DIU
CHM3DIU
CHM4DIU
CHM1DNIU
CHM3DNIU
–
Size
CH08
8x32
CHM
10X38
and
Midget
–
CHPV1U
CHPV2U
CHCC1DU
CHCC2DU
CHCC3DU
CHCC1DI-48U
CHPV1IU
CHPV2IU
CHCC1DIU
CHCC2DIU
CHCC3DIU
–
CH141D
CH141DMS
CH141DNX
CH141DN
CH142D
CH143D
CH143DMS
CH143DN
CH143DNMS
CH144D
CH141DI
CH141DNI
CH142DI
CH143DI
CH143DNI
CH144DI
CH221D
CH221DMS
CH221DNX
CH221DN
CH222D
CH223D
CH223DMS
CH223DN
CH223DNMS
CH224D
Not
Available
with
local
neon
indication
(remote
microswitch
only)
CHPV
CHCC
Class CC
IEC
CH22
22x58
Phase Configuration
IEC
400Vac
25A
UL
600V/30A;
IEC
690V/32A
•
•
•
•
•
•
*
*
*
*
*
*
1-pole
2-pole
3-pole
4-pole
1-pole + Neutral
3-pole + Neutral
1
2
3
4
2
4
•
*
1-pole
1
1-pole + Neutral
2
†††
†††
**
**
**
**
1-pole
2-pole
1-pole
2-pole
3-pole
1-pole
1
2
1
2
3
1
UL & IEC;
1000Vdc/30A
•
•
•
UL
600V/30A
UL 48Vdc/30A
CH14
14x51
UL
No. of
17.5mm
Modules Wire Range
•
•
•
•
•
•
•
•
•
UL 48Vdc/30A;
IEC
48Vdc/32A
IEC 690V32A
CHM1DI-48U
CHM1DNXU
Max
Voltage
& Current
UL
600Vac/dc
40A
(5 Watt)
IEC
690Vac,
50A
UL
600Vac/dc,
100A
(9.5 Watt)
IEC
690Vac,
125A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
†
†
†
†
†
†
1-pole
1 Neutral Pole
1-pole + Neutral
1-pole + Neutral
2-pole
3-pole
3-pole + Neutral
3-pole + Neutral
4-pole
1
1
1
2
2
3
3
4
4
1-pole
1-pole + Microswitch
1 Neutral Pole
1-pole + Neutral
2-pole
3-pole
3-pole + Microswitch
3-pole + Neutral
3-pole + Neutral + Microswitch
4-pole
1.5
1.5
1.5
3
3
4.5
4.5
6
6
6
1-pole
1-pole + Microswitch
1 Neutral Pole
1-pole + Neutral
2-pole
3-pole
3-pole + Microswitch
3-pole + Neutral
3-pole + Neutral + Microswitch
4-pole
2
2
2
4
4
6
6
8
8
8
1-16mm2 (18-8 AWG)
2
Maximum Torque
2.5 N•m (22LB-In)
1-10mm (18-8 AWG)
2.0 N•m (17.5LB-In)
1-16mm2 (18-8 AWG)
2.5 N•m (22LB-In)
1-21mm2 (18-4 AWG)
3.4 N•m (30LB-In)
1-21mm2 (18-4 AWG)
3.4 N•m (30LB-In)
2.5-16mm2 (14-6 AWG)
3.0 N•m (26LB-In)
2.5-50mm2 (14-1 AWG)
4.0 N•m (35LB-In)
Class J
easyID™ Indication
Neon
Indication
CH30J1
CH30J2
CH30J3
CH30J1I
CH30J2I
CH30J3I
CH30J
30A
Class J
UL/CSA
600Vac
††
††
††
1-pole
2-pole
3-pole
—
—
—
1-50mm2 (18-1 AWG)
1-8 AWG 4.0 N•m (35LB-In)
10-18 AWG 2.7N•m (24LB-IN)
CH60J1
CH60J2
CH60J3
CH60J1I
CH60J2I
CH60J3I
CH60J
60A
Class J
UL/CSA
600Vac
††
††
††
1-pole
2-pole
3-pole
—
—
—
1-50mm2 (18-1 AWG)
1-8 AWG 4.0 N•m (35LB-In)
10-18 AWG 2.7N•m (24LB-In)
† UL Recognized (cURus)
†† UL LIsted (cULus)
††† UL Recognized, Standard 4248-18, CSA
For further details see Data Sheets 2053 (CH08, CHM, CHCC, CH14 AND CH22) and 2144 (CHJ Class J)
*90V miminum required for illumination
***12V mininum required for illumination
* UL Recognized, CSA
** UL Listed, CSA
Widest Range of Fuse Holders Available
Modular
Fuse Holders
Series
Covers
SAMI™
Series
CUBEFuse™
Series
Open Block
Series
IEC
Series
Bolt-Down
Series
CH
Series
In-line
Series
JTN 600
Series
Panel Mount
Series
Optima®
Series
Knife Blade
Series
Class CC
and Midget
Series
Military
Series
Customer Assistance
Application Engineering
Technical assistance is available to all customers.
Staffed by degreed electrical engineers, this
application support is available Monday-Friday,
8:00 a.m. – 5:00 p.m. Central Time. Contact:
Customer Satisfaction Team
Available to answer questions regarding Cooper
Bussmann products & services Monday-Friday,
8:00 a.m. – 6:00 p.m. Central Time. Contact:
• Toll-free phone: 855-287-7626 (855-BUSSMANN)
• Toll-free fax: 800-544-2570
• E-mail: [email protected]
•
•
•
•
Emergency and After-Hours Orders
Next flight out or will call shipment for time-critical needs.
Customers pay only standard product price, rush freight
charges, & modest emergency service fee. Place these
orders through the Customer Satisfaction Team during
regular business hours. For after-hours, contact:
Toll-free phone: 855-287-7626 (855-BUSSMANN)
Fax: 636-527-1607
E-mail: [email protected]
Live Chat: www.cooperbussmann.com
Online Resources
Visit www.cooperbussmann.com for the following
resources:
• Product search & cross-reference
• Product & technical materials
• Solutions centers for information on topical
issues including arc-flash, selective coordination
& short-circuit current rating
• Technical tools, like our arc-flash calculator
• Where to purchase Cooper Bussmann product
• After hours 314-995-1342
C3 – the Enhanced, Online Cooper Customer Center
Provides real time product availability, net pricing, order
status & shipment tracking across six Cooper divisions:
B-Line, Bussmann, Crouse-Hinds, Lighting, Power
Systems & Wiring Devices. Call 877-995-5955 for
log-in assistance. Available at:
Services
Cooper Bussmann Services team provides
engineering expertise in electrical system reviews,
electrical safety training & component testing for
Agency compliance. Contact:
• www.cooperc3.com
• Phone: 636-207-3294
• E-mail: [email protected]
Cooper Bussmann®
St. Louis, MO 63178
636-394-2877
w w w. c o o p e r b u s s m a n n . c o m
Your Authorized Cooper Bussmann Distributor is:
Cooper Industries plc
600 Tra vis, Ste. 5600
Houston, TX 77002-1001
P: 713-209-8400
www.cooperindustries.com
Reorder # 3185
1111-2.5M
Printed in USA
Similar pages