DIODES UG3004-T

UG3001 - UG3005
3.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER
Features
·
·
·
·
·
Glass Passivated Die Construction
Ultra-Fast Switching for High Efficiency
Surge Overload Rating to 125A Peak
B
A
Low Reverse Leakage Current
A
Lead Free Finish, RoHS Compliant (Note 4)
C
Mechanical Data
D
·
·
Case: DO-201AD
·
·
Moisture Sensitivity: Level 1 per J-STD-020C
·
·
·
·
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
DO-201AD
Terminals: Finish ¾ Tin. Plated Leads Solderable per
MIL-STD-202, Method 208 e3
Polarity: Cathode Band
Marking: Type Number
Ordering Information: See Last Page
Dim
Min
Max
A
25.40
¾
B
7.20
9.50
C
1.20
1.30
D
4.80
5.30
All Dimensions in mm
Weight: 1.1 grams (approximate)
Maximum Ratings and Electrical Characteristics
@ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
RMS Reverse Voltage
Symbol
UG3001
UG3002
UG3003
UG3004
UG3005
Unit
VRRM
VRWM
VR
50
100
200
400
600
V
VR(RMS)
35
70
140
280
420
V
Average Rectified Output Current
(Note 1)
@ TA = 55°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
IO
3.0
A
IFSM
125
A
Forward Voltage
@ IF = 3.0A
VFM
@ TA = 25°C
@ TA = 100°C
IRM
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
0.95
1.25
1.7
5.0
100
V
mA
Reverse Recovery Time (Note 3)
trr
50
75
ns
Typical Total Capacitance (Note 2)
CT
60
30
pF
Typical Thermal Resistance Junction to Ambient (Note 1)
Operating and Storage Temperature Range
Notes:
1.
2.
3.
4.
5.
RqJA
35
°C/W
Tj, TSTG
-65 to +150
°C
Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
Short duration pulse test used to minimize self-heating effect.
DS27010 Rev. 4 - 2
1 of 3
www.diodes.com
UG3001 - UG3005
ã Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD RECTIFIED
CURRENT (A)
3.0
2.4
1.8
1.2
0.6
Single phase half-wave
60 Hz resistive or inductive load
0
25
50
75
100
125
150
175
200
10
UG3001 - UG3003
UG3004
1.0
UG3005
0.1
o
Tj = 25 C
0.01
0.6
1.0
1.2
1.4
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
100
150
UG3001 - UG3004
CT, TOTAL CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
TA, AMBIENT TEMPERATURE (° C)
Fig. 1 Forward Current Derating Curve
0.8
100
50
UG3005
10
Tj = 25° C
f = 1.0MHz
1
0
1
10
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
1
100
10
100
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance
trr
+0.5A
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
Oscilloscope
(Note 1)
-0.25A
(+)
-1.0A
Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS27010 Rev. 4 - 2
2 of 3
www.diodes.com
UG3001 - UG3005
Ordering Information
Notes:
(Note 6)
Device
Packaging
UG3001-B
DO-201AD
500/Bulk
UG3001-T
DO-201AD
1.2K/Tape & Reel, 13-inch
UG3002-B
DO-201AD
500/Bulk
UG3002-T
DO-201AD
1.2K/Tape & Reel, 13-inch
UG3003-B
DO-201AD
500/Bulk
UG3003-T
DO-201AD
1.2K/Tape & Reel, 13-inch
UG3004-B
DO-201AD
500/Bulk
UG3004-T
DO-201AD
1.2K/Tape & Reel, 13-inch
UG3005-B
DO-201AD
500/Bulk
UG3005-T
DO-201AD
1.2K/Tape & Reel, 13-inch
Shipping
6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
DS27010 Rev. 4 - 2
3 of 3
www.diodes.com
UG3001 - UG3005