UF5A400D1 5A ULTRA-FAST RECTIFIER Features Mechanical Data • • • • • • • Ultra-Fast Die Construction Soft, Fast Switching Capability Low Leakage Current Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) • • NEW PRODUCT • Case: TO252-3L Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram C LEFT PIN RIGHT PIN A Top View A BOTTOMSIDE HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Top View Pin-Out Ordering Information (Note 2) Part Number UF5A400D1-13 Notes: Case TO252-3L Packaging 2500 pieces/reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For packaging details, go to our website at http://www.diodes.com. Marking Information YYWW UF5A400 UF5A400D1 Document number: DS32142 Rev. 3 - 2 UF5A400 = Product Type Marking Code = Manufacturers’ Code Marking YYWW = Date code marking YY = Last two digits of year (ex: 09 for 2009) WW = Week code (01 to 53) 1 of 4 www.diodes.com December 2010 © Diodes Incorporated UF5A400D1 Maximum Ratings @TA = 25°C unless otherwise specified Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR IO Value Unit 400 V 5 A IFSM 100 A Symbol RθJC RθJA TJ, TSTG Value 2.0 34 -65 to +175 Unit °C/W °C/W °C Thermal Characteristics Characteristic Typical Thermal Resistance Junction to Case Typical Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Symbol Forward Voltage VF Reverse Leakage Current (Note 4) IR Reverse Recovery Time trr Maximum Junction Capacitance CJ Notes: Min ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Typ 0.91 0.77 Max 1.4 1.0 Unit ⎯ ⎯ 30 24 31 10 0.2 μA mA V 35 30 50 ns pf Test Condition IF = 5A, TJ = 25°C IF = 5A, TJ = 125°C VR = 400V, TJ = 25°C VR = 400V, TJ = 125°C IF = 0.5A, IR = 1.0A, Irr = 0.25A IF = 1A, VR = 30V, di/dt = 100A/μs VR = 10VDC, f = 1MHz 3. Device mounted on Polymide PCB, with 16X recommended pad layout. 4. Short duration pulse test used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (A) 4.0 3.5 PD, POWER DISSIPATION (W) NEW PRODUCT Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage 3.0 2.5 2.0 1.5 1.0 0.5 0 0 1 2 3 4 5 6 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation UF5A400D1 Document number: DS32142 Rev. 3 - 2 10 1 TA = 150°C TA = 125°C 0.1 TA = 85°C 0.01 TA = 25°C 0.001 T A = -55°C 0.0001 0.00001 0 2 of 4 www.diodes.com 0.2 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics December 2010 © Diodes Incorporated f = 1MHz CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (µA) 100 100 10 T A = 150°C TA = 125°C 1 TA = 85°C TA = 25°C 0.1 0.01 0 10 50 100 150 200 250 300 350 400 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0 6 5 10 15 20 25 30 35 40 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 175 Based on Lead Temperature (TL) TA, DERATED AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) NEW PRODUCT UF5A400D1 RθJA = RθJC 5 Note 3 4 3 2 1 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (° C) Fig. 5 Forward Current Derating Curve 150 125 100 75 50 25 0 0 175 80 160 240 320 VR, DC REVERSE VOLTAGE (V) 400 Fig. 6 Operating Temperature Derating Package Outline Dimensions E A b3 c2 L3 A2 D E1 H L4 A1 L e 2X b2 3X b UF5A400D1 Document number: DS32142 Rev. 3 - 2 a 3 of 4 www.diodes.com TO252-3L Dim Min Max Typ A 2.19 2.39 2.29 A1 0.00 0.13 0.08 A2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c2 0.45 0.58 0.531 D 6.00 6.20 6.10 D1 5.21 − − e 2.286 − − E 6.45 6.70 6.58 E1 4.32 − − H 9.40 10.41 9.91 L 1.40 1.78 1.59 L3 0.88 1.27 1.08 L4 0.64 1.02 0.83 a 0° 10° − All Dimensions in mm December 2010 © Diodes Incorporated UF5A400D1 Suggested Pad Layout X2 Dimensions Z X1 X2 Y1 Y2 C E1 Y2 NEW PRODUCT C Z Y1 X1 Value (in mm) 11.6 1.5 7.0 2.5 7.0 6.9 2.3 E1 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com UF5A400D1 Document number: DS32142 Rev. 3 - 2 4 of 4 www.diodes.com December 2010 © Diodes Incorporated