BRIGHT BL-PWA-TJS-C10 Power domiled alingap high brightness surface mount led. Datasheet

AMERICAN BRIGHT OPTOELECTRONICS CORP.
Power DOMILED AlInGaP BL-PW Series
•
Feature:
1. High brightness surface mount LED.
2. 120° viewing angle.
3. Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm.
4. Qualified according to JEDEC moisture sensitivity Level 2.
5. Compatible to both IR reflow soldering and TTW soldering.
•
Package Dimension:
Recommended Solder Pad
V.6 Page: 1 of 7
AMERICAN BRIGHT OPTOELECTRONICS CORP.
•
Power DOMILED AlInGaP BL-PW Series
Optical Characteristics:
Part Number
BL-PWS-SJS-C10
•
•
•
•
•
•
•
•
AlInGaP /
Red, 625nm
120
900
BIN U1
BIN U2
BIN V1
BIN V2
180.0 – 450.0
285.0 – 715.0
285.0 – 355.0
355.0 – 450.0
450.0 – 560.0
560.0 – 715.0
TS AlInGaP /
Red, 625nm
120
2000
450.0 – 1125.0
450.0 – 560.0
560.0 – 715.0
715.0 – 900.0
900.0 – 1125.0
AlInGaP /
Amber, 615nm
120
1400
450.0 – 1125.0
450.0 – 560.0
560.0 – 715.0
715.0 – 900.0
900.0 – 1125.0
TS AlInGaP /
Amber, 615nm
120
3000
715.0 – 1800.0
715.0 – 900.0
900.0 – 1125.0
1125.0 – 1400.0
1400.0 – 1800.0
AlInGaP /
Orange, 605nm
120
1400
450.0 – 1125.0
450.0 – 560.0
560.0 – 715.0
715.0 – 900.0
900.0 – 1125.0
AlInGaP /
Yellow, 587nm
120
1000
450.0 – 900.0
450.0 – 560.0
560.0 – 715.0
715.0 – 900.0
BIN U1
BIN U2
BIN V1
BL-PWY-TJS-C10
Luminous
Intensity @
IF=50mA
180.0 – 224.0
224.0 – 285.0
285.0 – 355.0
355.0 – 450.0
BIN U1
BIN U2
BIN V1
BIN V2
BL-PWY-SJS-C10
•
•
•
750
BIN V1
BIN V2
BIN W1
BIN W2
BL-PWO-SJS-C10
•
•
•
•
120
BIN U1
BIN U2
BIN V1
BIN V2
BL-PWA-TJS-C10
•
•
•
•
AlInGaP /
Super Red, 632nm
BIN U1
BIN U2
BIN V1
BIN V2
BL-PWA-SJS-C10
•
•
•
•
Total Flux @
IF=50mA,
mlm (typ)
BIN T1
BIN T2
BIN U1
BIN U2
BL-PWR-TJS-C10
•
•
•
•
Viewing
angle
BIN S1
BIN S2
BIN T1
BIN T2
BL-PWR-SJS-C10
•
•
•
•
Chip Technology
Color
TS AlInGaP /
Yellow, 587nm
120
1600
450.0 – 1125.0
450.0 – 560.0
560.0 – 715.0
715.0 – 900.0
900.0 – 1125.0
V.6 Page: 2 of 7
AMERICAN BRIGHT OPTOELECTRONICS CORP.
Power DOMILED AlInGaP BL-PW Series
Note:
1. Other luminous intensity groups are also available upon request.
2. Luminous intensity is measured with an accuracy of ±11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength
group is allowed for each reel.
4. An optional Vf binning is also available upon request. Binning scheme is as per following table.
•
Absolute Maximum Ratings:
Parameter
Maximum Value
Unit
DC forward current.
70
mA
Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.1)
100
mA
Reverse voltage.
5
V
125
°C
Operating temperature.
-40 … +100
°C
Storage temperature.
-40 … +100
°C
LED junction temperature.
Power dissipation (at room temperature)
•
225
mW
Vf Binning:
Vf Bin @ 50mA
Forward voltage (V)
Standard
2.1 (typ. - AlInGaP), 2.5 (typ. – TS AlInGaP),
3.20 (max)
50
1.70 … 2.00
51
2.00 … 2.30
52
2.30 … 2.60
53
2.60 … 2.90
54
2.90 … 3.20
Forward voltage, Vf is measured with an accuracy of ±0.1 V.
V.6 Page: 3 of 7
AMERICAN BRIGHT OPTOELECTRONICS CORP.
•
Power DOMILED AlInGaP BL-PW Series
Wavelength Grouping:
Color
Group
Wavelength distribution (nm)
BL-PWS, Super-red
Full
625 – 640
BL-PWR-SJ, Red
Full
620 – 630
BL-PWR-TJ; Red (TS)
Full
620 - 635
BL-PWA, Amber
Full
610 – 621
W
610 - 615
X
615 - 621
Full
600 - 612
W
600 - 603
X
603 - 606
Y
606 - 609
Z
609 - 612
Full
582 - 594
W
582 - 585
X
585 - 588
Y
588 - 591
Z
591 - 594
BL-PWO, Orange
BL-PWY, Yellow
Wavelength is measured with an accuracy of ±1 nm.
V.6 Page: 4 of 7
AMERICAN BRIGHT OPTOELECTRONICS CORP.
•
Power DOMILED AlInGaP BL-PW Series
Typical electro-optical characteristics curves:
Fig.1 Relative luminous intensity vs. forward current.
Fig.2 Forward current vs. forward voltage.
Forw ard Current (m A) vs. Forw ard Voltage
Intensity vs. DC Forward Current
80
1.2
70
Forward Current (mA)
Relative intensity. Normalized at 50 mA.
90
1.4
1
0.8
0.6
0.4
60
AS AlInG aP
50
TS AlInGaP
40
30
20
0.2
10
0
0
0
10
20
30
40
50
60
70
80
1.5
2
FORWARD CURRENT (mA)
Fig.3 Radiation pattern.
30°
20°
10°
2.5
3
Forw ard Voltage (V)
Fig.4 Maximum forward current vs. ambient temperature.
0°
80
1.0
70
40°
0.8
0.6
60°
0.4
Forward Current, If
50°
60
50
MTTF > 10000 h
40
30
20
70°
0.2
10
80°
0
0
0
90°
10
20
30
40
50
60
70
80
90
Ambient Temperature
Fig.5 Relative Intensity vs. Wavelength
Relative Spectra Emission
1.0
0.9
Orange
Relative Intensity
0.8
Amber
0.7
Red
0.6
0.5
Super Red
Green
Hyper Red
0.4
0.3
0.2
0.1
0.0
500
550
600
650
700
750
800
Wavelength (nm)
V.6 Page: 5 of 7
100
AMERICAN BRIGHT OPTOELECTRONICS CORP.
Power DOMILED AlInGaP BL-PW Series
Fig.6 Recommended IR-reflow Soldering Profile (acc. To IPC 9501).
Fig.7 Recommended TTW Soldering Profile (acc. to CECC 00802).
V.6 Page: 6 of 7
AMERICAN BRIGHT OPTOELECTRONICS CORP.
Power DOMILED AlInGaP BL-PW Series
•
Taping And Orientation:
Reels come in quantity of 2000 units.
Reel diameter is 180 mm.
V.6 Page: 7 of 7
Similar pages