74LVC2G34 DUAL BUFFER Description Pin Assignments The 74LVC2G34 is a dual buffer gate with standard push - (Top View) pull outputs. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant 1A 1 6 1Y GND 2 5 VCC 3 4 2Y to 5.5V allowing this device to be used in a mixed voltage NEW PRODUCT environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the 2A output preventing damaging current backflow when the device is powered down. SOT26/SOT363 The gate performs the positive Boolean function: Y=A (Top View) 1A 1 6 1Y GND 2 5 VCC 2A 3 4 2Y DFN1010 Features Applications • Wide Supply Voltage Range from 1.65V to 5.5V • Voltage Level Shifting • ±24mA Output Drive at 3.0V • General Purpose Logic • CMOS low power consumption • Power Down Signal Isolation • IOFF Supports Partial-Power-Down Mode Operation • Wide array of products such as: • Inputs accept up to 5.5V o PCs, networking, notebooks, netbooks, PDAs • ESD Protection Tested per JESD 22 o Computer peripherals, hard drives, CD/DVD ROM o Exceeds 200-V Machine Model (A115-A) o TV, DVD, DVR, set top box o Exceeds 2000-V Human Body Model (A114-A) o Cell Phones, Personal Navigation / GPS o Exceeds 1000-V Charged Device Model (C101) o MP3 players ,Cameras, Video Recorders • Latch-Up Exceeds 100mA per JESD 78, Class II • Range of Package Options • SOT26, SOT363, and DFN1010 Available in “Green” Molding Compound (no Br, Sb) • Lead Free Finish/ RoHS Compliant (Note 1) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74LVC2G34 Document number: DS35165 Rev. 3 - 2 1 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER NEW PRODUCT Pin Descriptions Pin Name Pin NO. 1A GND 2A 2Y Data Input Ground Data Input Data Output VCC 1 2 3 4 5 Description 1Y 6 Data Output Supply Voltage Logic Diagram 1A 2A 1 6 3 4 1Y 2Y Function Table Inputs A Output Y H L H L 74LVC2G34 Document number: DS35165 Rev. 3 - 2 2 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER Absolute Maximum Ratings (Note 2) Symbol ESD HBM ESD CDM ESD MM VCC NEW PRODUCT VI Rating Unit 2 1 200 KV KV V Supply Voltage Range -0.5 to 6.5 V Input Voltage Range -0.5 to 6.5 V Human Body Model ESD Protection Charged Device Model ESD Protection Machine Model ESD Protection VO Voltage applied to output in high impedance or IOFF state VO Voltage applied to output in high or low state. -0.5 to 6.5 V -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA Continuous current through Vdd or GND ±100 mA Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C TJ TSTG Notes: Description 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 3) Symbol VCC Operating Voltage Parameter Min Max Unit Operating 1.65 5.5 V Data retention only 1.5 VCC = 1.65V to 1.95V VIH High-level Input Voltage VCC = 2.3V to 2.7V VCC = 3V to 3.6V VCC = 4.5V to 5.5V 0.65 X VCC 1.7 Low-level input voltage VI Input Voltage VO Output Voltage 0.7 X VCC 0.35 X VCC VCC = 2.3V to 2.7V 0.7 VCC = 3V to 3.6V 0.8 VCC = 4.5V to 5.5V VCC = 1.65V IOH IOL High-level output current Low-level output current 74LVC2G34 Document number: DS35165 Rev. 3 - 2 V 2 VCC = 1.65V to 1.95V VIL V V 0.3 X VCC 0 5.5 V 0 VCC V -4 VCC = 2.3V -8 VCC = 3V -16 -24 VCC = 4.5V -32 VCC = 1.65V 4 VCC = 2.3V 8 VCC = 3V 16 24 VCC = 4.5V 32 3 of 10 www.diodes.com mA mA June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER Recommended Operating Conditions (cont.) (Note 3) Symbol Δt/ΔV NEW PRODUCT TA Notes: Parameter Input transition rise or fall rate Min VCC = 1.8V ± 0.15V, 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Operating free-air temperature -40 Max Unit 20 10 5 ns/V 125 ºC 3. Unused inputs should be held at VCC or Ground. Electrical Characteristics 40ºC to 85ºC Symbol Parameter Test Conditions IOH = -100μA VOH High Level Output Voltage 1.65V IOH = -8mA 2.3V IOH = -16mA Low Level Output Voltage 4.5V IOL = 100μA Max 0.95 1.9 1.7 2.4 1.9 2.3 2.0 3.8 3.4 V 0.1 0.1 0.45 0.70 IOL = 8mA 2.3V IOL = 16mA 3V Unit VCC – 0.1 1.2 1.65V 0.3 0.45 0.4 0.60 0.55 0.80 V 4.5V 0.55 0.80 0 to 5.5V ±5 ± 20 μA 0 ± 10 ± 20 μA VI = 5.5V of GND IO=0 1.65V to 5.5V 10 40 μA Input at VCC –0.6V 3V to 5.5V 500 5000 μA VI = 5.5 V or GND IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current Additional Supply Current Document number: DS35165 Rev. 3 - 2 Min 1.65V to 5.5V Input Current 74LVC2G34 Max -40ºC to 125ºC IOL = 4mA IOL = 32mA ΔICC 3V IOH = -32mA IOL = 24mA II Min 1.65V to 5.5V VCC – 0.1 IOH = -4mA IOH = -24mA VOL VCC 4 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER Package Characteristics (All typical values are at VCC = 3.3V, TA = 25°C) Symbol Parameter NEW PRODUCT CI Thermal Resistance Junction-to-Ambient θJC Thermal Resistance Junction-to-Case VCC VI = VCC – or GND Input Capacitance θJA Notes: Test Conditions Min Typ. Max Unit 4 3.3 SOT26 pF 204 SOT363 DFN1010 SOT26 (Note 4) 371 430 52 o C/W SOT363 DFN1010 (Note 4) 143 190 o C/W 4. Test condition for SOT26, SOT363 and DFN1010 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. Switching Characteristics TA = -40°C to 85°C, CL = 30 or 50pF Parameter tpd From (Input) TO (OUTPUT) A Y TA = -40 °C to 125 °C, CL = 30 or 50pF Parameter From (Input) TO (OUTPUT) tpd A Y (see Figure 1) VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Min Max Min Max Min Max Min Max 0.5 8.6 0.5 4.4 0.5 4.1 0.5 3.2 Unit ns (see Figure 1) VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Min Max Min Max Min Max Min Max 0.5 10.8 0.5 5.5 0.5 5.1 0.5 4.0 Unit ns Operating Characteristics TA = 25ºC Parameter Cpd Power dissipation capacitance 74LVC2G34 Document number: DS35165 Rev. 3 - 2 Test Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V Typ. Typ. Typ. Typ. f = 10 MHz 17 19 20 21 5 of 10 www.diodes.com Unit pF June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER NEW PRODUCT Parameter Measurement Information VCC Inputs VM CL ≤2ns VCC/2 30 pF 1 KΩ ≤2ns VCC/2 30 pF 500 Ω VI tr/tf 1.8V±0.15V VCC 2.5V±0.2V VCC RL 3.3V±0.3V 3V ≤2.5ns 1.5 V 50 pF 500 Ω 5V±0.5V VCC ≤2.5ns VCC/2 50 pF 500 Ω Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74LVC2G34 Document number: DS35165 Rev. 3 - 2 6 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER Ordering Information 74LVC 2G 34 XX - 7 NEW PRODUCT Logic Device 74 : Logic Prefix LVC : 1.65 to 5.5V Family 2G : Two gates Function Package 34 : Buffer/Driver Device Package Code Packaging (Note 5) 74LVC2G34W6-7 74LVC2G34DW-7 74LVC2G34FW4-7 W6 DW FW4 SOT26 SOT363 DFN1010 Notes: Packing W6 : SOT 26 DW : SOT363 FW4 : DFN1010 7 : Tape & Reel 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel 3000/Tape & Reel 5000/Tape & Reel -7 -7 -7 5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf 6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf Marking Information (1) SOT26, SOT363 Part Number Package Identification Code 74LVC2G34W6 74LVC2G34DW SOT26 SOT363 Z7 Z7 Part Number Package Identification Code 74LVC2G34FW4 DFN1010 Z7 (2) DFN1010 74LVC2G34 Document number: DS35165 Rev. 3 - 2 7 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER Package Outline Dimensions (All Dimensions in mm) NEW PRODUCT (1) Package Type: SOT26 (2) Package Type: SOT363 C L 0.10/0.30 C L 1.9 C L 1.15/1.35 6x-0.42 C L 6x-0.60 2.0/2.2 4x-0.65 PIN 1 0.40/0.45 0.65Bsc. Land Pattern Recommendation (unit:mm) 1.8/2.2 0.1/0.22 0.9/1.0 0/0.1 1.10Max. C L "A" Detail"A" 0.25/0.40 74LVC2G34 Document number: DS35165 Rev. 3 - 2 0°/8 ° 0.25 Gauge Plane 8 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER Package Outline Dimensions (All Dimensions in mm) Seating Plane Side View 0.08 C 0.08 C 74LVC2G34 Document number: DS35165 Rev. 3 - 2 0.20(6x) Pin1 0.35Typ. 0.14/0.20(6x) 0.15Min. A 0.35Typ. Pin1 0.15 0.95/1.05 0.15Min. 0.07Typ. 0.35/0.45(6x) 2x- C 0.235 0.95/1.05 B 0.05/0.15 2X- 0/0.05 NEW PRODUCT 0.08 C 0.45(6x) 0.40Max. 0.05 C 6x- 0.13Typ. (3) Package Type: DFN1010 Land Pattern Recommendation (unit:mm) Top View 0.07 C A B Bottom View 9 of 10 www.diodes.com June 2011 © Diodes Incorporated 74LVC2G34 DUAL BUFFER IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com 74LVC2G34 Document number: DS35165 Rev. 3 - 2 10 of 10 www.diodes.com June 2011 © Diodes Incorporated