GE GP15B Glass passivated junction rectifier Datasheet

GP15A THRU GP15M
GLASS PASSIVATED JUNCTION RECTIFIER
*
Reverse Voltage - 50 to 1000 Volts
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 1.5 Ampere operation at TA=55°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
N
T
E
D
DO-204AC
P
A
T
E
0.034 (0.86)
1.0
(25.4)
MIN.
Forward Current - 1.5 Amperes
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
0.140 (3.6)
0.104 (2.6)
DIA.
1.0
(25.4)
MIN.
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
GP
15A
GP
15B
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
Maximum RMS voltage
VRMS
35
70
140
280
Maximum DC blocking voltage
VDC
50
100
200
400
600
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
I(AV)
1.5
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
50.0
Amps
VF
1.1
Volts
IR(AV)
100.0
µA
IR
5.0
200.0
µA
Typical reverse recovery time (NOTE 1)
trr
2.0
µs
Typical junction capacitance (NOTE 2)
CJ
15.0
pF
RΘJA
RΘJL
45.0
20.0
°C/W
TJ, TSTG
-65 to +175
°C
Maximum instantaneous forward voltage at 1.5A
Maximum full load reverse current, full cycle average
0.375" (9.5mm) lead length atTA=55°C
Maximum reverse current
at rated DC blocking voltage
TA= 25°C
TA=150°C
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
GP
15D
GP
15G
NOTES:
(1) Reverse recovery conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
GP
15J
GP
15K
GP
15M
600
800
1000
Volts
420
560
700
Volts
800
1000
Volts
UNITS
RATINGS AND CHARACTERISTIC CURVES GP15A THRU GP15M
1.5
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
1.25
50
1.0
0.75
0.5
0.25
0.375"(9.5mm) LEAD LENGTH
0
0
25
50
75
100
125 150 175
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
40
30
20
10
0
AMBIENT TEMPERATURE, °C
1
10
100
NUMBER OF CYCLES AT 60 HZ
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
10
INSTANTANEOUS FORWARD CURRENT,
AMPERES
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=150°C
1
TJ=25°C
0.1
0.01
0.4
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
10
TJ=125°C
1
TJ=75°C
0.1
TJ=25°C
0.01
0.6
0.8
1.0
1.2
1.4
0
1.6
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
TRANSIENT THERMAL IMPEDANCE (°C/W)
JUNCTION CAPACITANCE, pF
60
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
10
REVERSE VOLTAGE, VOLTS
100
100
10
1
0.1
0.01
0.1
1
t, PULSE DURATION, sec
1
80
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
10
1
40
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
30
20
100
10
100
Similar pages