Kingbright APKB3025SURKSYK-F01 3.0x2.5mm surface mount led lamp Datasheet

3.0x2.5mm SURFACE MOUNT LED LAMP
APKB3025SURKSYK-F01
HYPER RED
SUPER BRIGHT YELLOW
Features
Description
OBI -COLOR,LOW POWER CONSUMPTION.
The Hyper Red source color devices are made with DH
O3.0mmx2.5mm SMT LED, 1.3mm THICKNESS.
OWIDE VIEWING ANGLE.
InGaAlP on GaAs substrate Light Emitting Diode.
OVARIOUS COLORS AND LENS TYPES AVAILABLE.
with DH InGaAlP on GaAs substrate Light Emitting Diode.
OIDEAL FOR BACKLIGHT AND INDICATOR.
The Super Bright Yellow source color devices are made
OPACKAGE : 2000PCS / REEL.
ORoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.0079") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAF1368
REV NO: V.1
DATE: MAR/29/2005
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
ERP:1204000288-01
Selection Guide
Part No.
Dice
Iv (mcd)
@ 20mA
Lens Type
HYPER RED (InGaAlP)
APKB3025SURKSYK-F01
Viewing
Angle
Min.
Typ.
70
150
18
50
WATER CLEAR
SUPER BRIGHT YELLOW (InGaAlP)
2θ1/2
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Hyper Red
Super Bright Yellow
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
650
590
nm
IF=20mA
Hyper Red
Super Bright Yellow
635
590
nm
IF=20mA
Spectral Line Half-width
Hyper Red
Super Bright Yellow
28
20
nm
IF=20mA
C
Capacitance
Hyper Red
Super Bright Yellow
35
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Hyper Red
Super Bright Yellow
1.95
2.0
2.5
2.5
V
IF=20mA
IR
Reverse Current
All
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Super Bright Yellow
Units
Power dissipation
170
125
mW
DC Forward Current
30
30
mA
Peak Forward Current [1]
185
175
mA
Reverse Voltage
5
V
-40°C To +85°C
Operating/Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF1368
REV NO: V.1
DATE: MAR/29/2005
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
ERP:1204000288-01
APKB3025SURKSYK-F01
Hyper Red
SPEC NO: DSAF1368
REV NO: V.1
DATE: MAR/29/2005
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
ERP:1204000288-01
Super Bright Yellow
SPEC NO: DSAF1368
REV NO: V.1
DATE: MAR/29/2005
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
ERP:1204000288-01
APKB3025SURKSYK-F01
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF1368
REV NO: V.1
DATE: MAR/29/2005
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
ERP:1204000288-01
Similar pages