CEL NX5504EH-AZ 1 550 nm for ftth ingaasp mqw-fp laser diode Datasheet

LASER DIODE
NX5504 Series
1 550 nm FOR FTTH
InGaAsP MQW-FP LASER DIODE
DESCRIPTION
The NX5504 Series is a 1 550 nm Multiple Quantum Well (MQW)
structured Fabry-Perot (FP) laser diodes with InGaAs monitor PIN-PD. These
devices are designed and ideal for Fiber To The Home (FTTH).
APPLICATION
• FTTH (Fiber To The Home)
FEATURES
• Optical output power
Po = 5.0 mW
• Low threshold current
lth = 8 mA
• Differential efficiency
ηd = 0.3 W/A
• Wide operating temperature range TC = −40 to +85°C
• InGaAs monitor PIN-PD
• CAN package
φ 5.6 mm
• Fiber coupling point
5.8 mm
Document No. PL10435EJ04V0DS (4th edition)
Date Published July 2006 NS CP(K)
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
NX5504 Series
PACKAGE DIMENSIONS (UNIT: mm)
110˚±2˚
(0.3)
1.0±0.1
BOTTOM VIEW
(0.3)*2
φ 5.6+0.00
–0.03
*2
(φ 4.2)
(φ 3.55)*2
1
2
4
3
*2
Fiber Coupling Point
*1
5.80±0.05
2.97±0.2
3.87±0.3
φ 2.0
PIN CONNECTIONS
NX5504EH
Reference
Plane
1 (Case)
2
4
2
4– φ 0.45
LD
LD
3
*1 Recommendation of Fiber Coupling Conditions
Fiber : SMF with 8 degree angle-polished ferrule
Fiber coupling distance : 5.80±0.05 mm from reference plane.
Fiber coupling alignment : optimixed x, y, θ ( ∆ x, ∆ y ≤ ±300 µ m).
*2 ( ) indicates nominal dimension.
Data Sheet PL10435EJ04V0DS
4
PD
PD
φ 2.0
2
NX5504EK
1 (Case)
15.0±1.0 1.2±0.1
<R>
3
NX5504 Series
ORDERING INFORMATION
Part Number
NX5504EH-AZ*
Package
Pin Connections
1
4-pin CAN with ball lens cap
LD
4
2
PD
3
1
NX5504EK-AZ*
LD
2
4
PD
3
Remarks 1. The color of ball lens cap might be observed differently.
2.
The hermetic test will be performed as AQL 1.0%.
*NOTE:
Please refer to the last page of this data sheet, “Compliance with EU Directives” for
Pb-Free RoHS Compliance Information.
Data Sheet PL10435EJ04V0DS
3
NX5504 Series
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
Optical Output Power
Po
10
mW
Forward Current of LD
IF
150
mA
Reverse Voltage of LD
VR
2.0
V
Forward Current of PD
IF
10
mA
Reverse Voltage of PD
VR
20
V
Operating Case Temperature
TC
−40 to +85
°C
Storage Temperature
Tstg
−40 to +85
°C
Assembly Temperature
Tasb
150 (15 Hr)
°C
Lead Soldering Temperature
Tsld
350 (3 sec.)
°C
Relative Humidity (noncondensing)
RH
85
%
4
Data Sheet PL10435EJ04V0DS
NX5504 Series
ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C, unless otherwise specified)
Parameter
Symbol
Operating Voltage
Vop
Threshold Current
Ith
Threshold Output Power
Pth
Differential Efficiency
ηd
Temperature Dependence of
∆ηd
Differential Efficiency
λC
Center Wavelength
Conditions
MIN.
TYP.
MAX.
Unit
1.1
1.5
V
8
20
mA
TC = 85°C
20
40
TC = −40 to +85°C, IF = Ith
100
200
Po = 5.0 mW, TC = −40 to +85°C
∆ηd = 10 log
ηd (@ 85°C)
µW
0.15
0.3
W/A
−3.0
−1.5
dB
ηd (@ 25°C)
1 480
Po = 5.0 mW, RMS (−20 dB)
1 580
nm
TC = −40 to +85°C
Temperature Dependence of Center
∆λ/∆T
TC = −40 to +85°C
0.5
Po = 5.0 mW, RMS (−20 dB)
1.5
nm/°C
Wavelength
σ
Spectral Width
3.0
nm
TC = −40 to +85°C
Rise Time
tr
10-90%
0.7
ns
Fall Time
tf
90-10%
0.7
ns
Monitor Current
Im
VR = 5 V, Po = 5.0 mW
Monitor Dark Current
ID
VR = 5 V
µA
200
0.1
VR = 5 V, TC = −40 to +85°C
Monitor PD Terminal Capacitance
*1
Tracking Error
10
nA
500
Ct
VR = 5 V, f = 1 MHz
6
γ
Im = const. (@ Po = 5.0 mW, TC = 25°C)
−1.0
20
pF
1.0
dB
TC = −40 to +85°C
*1 Tracking Error: γ
Po
γ = 10 log
(mW)
Po
5.0
[dB]
TC = 25˚C
5.0
TC = –40 to +85˚C
Po
0
Im
Im
(mA)
Data Sheet PL10435EJ04V0DS
5
NX5504 Series
TYPICAL CHARACTERISTICS (TC = −40 to +85°C, unless otherwise specified)
OPTICAL OUTPUT POWER
vs. FORWARD CURRENT
OPERATING CURRENT AND THRESHOLD
CURRENT vs. CASE TEMPERATURE
100
5
TC = –40˚C
Operating Current Iop (mA),
Threshold Current Ith (mA)
Optical Output Power Po (mW)
6
+85˚C
+25˚C
4
3
2
1
0
10
20
30
40
50
60
50
Ith
5
1
–60 –40 –20
1 560
1 550
1 540
1 530
1 520
1 510
1 500
1 490
0
20
40
60
80
100
Case Temperature TC (˚C)
Remark The graphs indicate nominal characteristics.
6
0
20
40
60
Case Temperature TC (˚C)
TEMPERATURE DEPENDENCE OF
CENTER WAVELENGTH
1 480
–60 –40 –20
Iop
10
Forward Current IF (mA)
Center Wavelength λC (nm)
<R>
Data Sheet PL10435EJ04V0DS
80
100
NX5504 Series
TYPICAL CHARACTERISTICS (TC = 25°C, unless otherwise specified)
FORWARD CURRENT vs.
FORWARD VOLTAGE
OPTICAL OUTPUT POWER
vs. MONITOR CURRENT
10
Optical Output Power Po (mW)
Forward Current IF (mA)
50
40
30
20
10
0
1
2
600
1 800
1 200
Monitor Current Im (µA)
SPECTRUM
TOLERANCE OF FIBER
COUPLING DISTANCE (Z)
Optical Output Power from Fiber Pf (mW)
Forward Voltage VF (V)
–20
–30
–40
–50
–60
–70
–80
–90
1 510
5
0
3
–10
Relative Intensity
<R>
1 520
1 530
1 540
1 550
0.8
0.7
0.6
Z
Pf
SMF
Po = 5.0 mW
5.4
5.5
0.5
0.4
0.3
0.2
0.1
0.0
5.3
Wavelength λ (nm)
5.6
5.7
5.8
5.9
6.0
Z-Axis Tolerance Z (mm)
Remark The graphs indicate nominal characteristics.
Data Sheet PL10435EJ04V0DS
7
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
Similar pages