ETC2 FP-1B10 Microgripper - 0.8mm to 0.5mm lead pitch Datasheet

FP-1B30
FP-1B10
MicroGripper - 0.8mm to 0.5mm Lead Pitch
FEATURES
•
•
•
•
Used to monitor signal on SMT
packages up to 0.5mm lead
pitch with a logic analyzer or
oscilloscope
Three adjacent SMT leads
(max.) for testing
Board under test must be
inactive when connecting clips
Maximum frequency is
100MHz
SPECIFICATIONS
Temperature Range:
Conductor Resistance:
Conductor Resistance:
Contact Resistance:
Tines Diameter:
Body Height:
Body Material:
Voltage Usage:
Rating:
Bandwidth:
Inductance:
Capacitance:
Material:
0-70°C
(FP-1B10) 160 mOhms
(FP-1B30) 170 mOhms
10 mOhms
0.15mm
15mm
ABS
+/-40V
500 WVDC
(3db) >100MHz
< 1mH @ 1KHz
< 2.0pF @ 1KHz
Steel wire or stainless steel,
nickel-plated
DIMENSIONS
Similar pages