BRIGHT BL-PDP-GJS-C10 Gap domiled surface mount led. Datasheet

AMERICAN BRIGHT OPTOELECTRONICS CORP.
•
Gap DOMILED BL-PDP-GJS Series
Feature:
1. Surface mount LED.
2. 120° viewing angle.
3. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8 mm.
4. Qualified according to JEDEC moisture sensitivity Level 2.
5. Compatible to both IR reflow soldering and TTW soldering.
•
Package Dimension:
Recommended Solder Pad
V.2 Page: 1 of 5
AMERICAN BRIGHT OPTOELECTRONICS CORP.
•
Gap DOMILED BL-PDP-GJS Series
Optical Characteristics:
Part Number
Chip Technology /
Color
BL-PDP-GJS-C10
GaP /
•
•
•
BIN G1
BIN G2
BIN H1
•
BIN H2
Forward voltage
Luminous Intensity @ If = 10mA
Iv ( mcd )
1.80 … 4.50
Green, 560 nm
Chip Type
@ If=10 mA.
2.05 V (typ.); 2.45 V (max)
1.80 … 2.24
2.24 … 2.80
2.80 … 3.55
3.55 … 4.50
Viewing angle
at 50% Iv
GaP
Reverse current, IR
@ VR = 5V, (max)
100 µA
120°
NOTE:
1. Other luminous intensity groups are also available upon request.
2. Luminous intensity is measured with an accuracy of ±11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one
wavelength group is allowed for each reel.
4. An optional Vf binning is also available upon request. Binning scheme is as per following table.
•
Absolute Maximum Ratings:
Maximum Value
DC forward current.
30
mA
Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005)
500
mA
Reverse voltage.
5
V
100
°C
Operating temperature.
-40 … +100
°C
Storage temperature.
-40 … +100
°C
LED junction temperature.
Power dissipation ( at room temperature )
•
Unit
75
mW
Vf Binning:
Vf Bin @ 10mA
Forward voltage (V)
01
1.25 … 1.55
02
1.55 … 1.85
03
1.85 … 2.15
04
2.15 … 2.45
V.2 Page: 2 of 5
AMERICAN BRIGHT OPTOELECTRONICS CORP.
•
Gap DOMILED BL-PDP-GJS Series
Wavelength Grouping:
Color
Group
BL-PDP; Pure Green
Wavelength distribution (nm)
Full
552.5 – 564.5
W
552.5 – 555.5
X
555.5 – 558.5
Y
558.5 – 561.5
Z
561.5 – 564.5
Wavelength is measured with an accuracy of ±1 nm.
•
Typical electro-optical characteristics curves:
Fig. 1 Relative luminous intensity vs. forward current.
Fig. 2 Forward current vs. forward voltage.
Forward Current vs. Forward Voltage
4.0
35
3.5
Forward Current (mA)
Relative intensity. Normalized at 10 mA.
Intensity vs. DC Forw ard Current
3.0
2.5
2.0
1.5
1.0
0.5
30
25
20
15
10
5
0
0.0
0
5
10
15
20
25
30
1.0
35
1.2
1.4
Fig. 3 Radiation pattern
30°
20°
10°
1.6
1.8
2.0
2.2
2.4
2.6
Forward Voltage (V)
FORW ARD CURRENT (m A)
Fig. 4 Maximum forward current vs. temperature
0°
1.0
35
30
40°
0.8
50°
0.6
60°
0.4
70°
0.2
20
15
10
5
0
80°
90°
Forward Current, If
25
0
0
10
20
30
40
50
60
70
80
Ambient Temperature
V.2 Page: 3 of 5
90
100
AMERICAN BRIGHT OPTOELECTRONICS CORP.
Gap DOMILED BL-PDP-GJS Series
Fig. 5 Recommended IR-reflow Soldering Profile (acc. to IPC 9501)
Classification Reflow Profile (JEDEC J-STD-020B)
275
250
235-240oC
10-30s
200
Ramp-up
3 oC/sec
183 oC
o
Temperature ( C)
225
175
60-150s
150
125
Ramp-down
6 oC/sec
100
Preheat
60-120s
75
50
360s max
25
0
50
100
150
200
Time (sec)
Fig. 6 Recommended TTW Soldering Profile (acc. to CECC 00802).
V.2 Page: 4 of 5
AMERICAN BRIGHT OPTOELECTRONICS CORP.
Gap DOMILED BL-PDP-GJS Series
•
Taping And Orientation.
Reels come in quantity of 2000 units. Reel diameters is 180 mm .
V.2 Page: 5 of 5
Similar pages