FRJ-50, FRJ-55 Vishay Dale Metal Film Resistors, Industrial, Zero Ohm Jumper Resistor FEATURES • Provides low resistance circuit interconnections • Color band marking for ease of identification after mounting • Flame retardant coating • Compatible with automatic insertion equipment • Tape and reel packaging STANDARD ELECTRICAL SPECIFICATIONS MODEL MAXIMUM RESISTANCE VALUE mΩ MAXIMUM CURRENT A @ + 25ºC @ + 150ºC FRJ-50 10 25 0 FRJ-55 10 25 0 TECHNICAL SPECIFICATIONS PARAMETER UNIT FRJ-50 Insulation Resistance - Dry MΩ 10,000 Insulation Resistance - Wet MΩ 100 Category Temperature Range °C - 55 / + 155 Dielectric Strength - Atmospheric - Reduced VRMS VRMS 500 325 500 325 Failure Rate 10-9/h < 10 < 10 g 0.1 0.2 Weight FRJ-55 10,000 100 - 55 / + 155 MATERIAL SPECIFICATIONS Insulation Flammability: Self extinguishing 10 seconds after Lead Material: Tin-plated copper (maximum 98% tin) flame is removed ORDERING INFORMATION FRJ MODEL Zero Ohm Jumper www.vishay.com 30 55 SIZE 50 55 For Technical Questions, contact [email protected] Document Number: 31016 Revision 01-Aug-02 FRJ-50, FRJ-55 Metal Film Resistors, Industrial, Zero Ohm Jumper Resistor Vishay Dale DIMENSIONS in inches [millimeters] FRJ-50 1.100 ± 0.118 [27.94 ± 3.00] 0.152 + 0.008 - 0.022 [3.86 + 0.20 - 0.56] 0.020 ± 0.002 [0.51 ± 0.05] 0.062 ± 0.010 [1.57 ± 0.25] FRJ-55 1.100 ± 0.118 [27.94 ± 3.00] 0.265 [6.73] Max. 0.024 ± 0.002 [0.61 ± 0.05] 0.090 ± 0.008 [2.29 ± 0.21] MARKING Single Black Color Band PACKAGING Taped Lead and Reel Package (52.4mm inside tape spacing per EIA-296-E). Notes: 1. Quantity per reel: 5,000 pieces in 5,000-piece increments. 2. A minimum of 12.0" [305mm] bare tape leader shall be provided at each end of the reel. 3. Paper separator protection between layers of components. 4. Reel arbor hole is 1.25" [31.75mm]. Document Number: 31016 Revision 01-Aug-02 For Technical Questions, contact [email protected] www.vishay.com 31